I need cad design drawing jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    409 i need cad design drawing jobs found, pricing in SGD

    This drawing is for a tool used to undo a lid, i will have a separate tee piece with a diagonal end that sets into a diagonal shape in the center of the disks. ( to 4 different disks). The tee piece is inserted into either key 1, 2 or 3 and 4 and it is used to undo or tighten the lid. -PLEASE READ THIS DESCRIPTION CAREFULLY- I have already had a friend

    $48 (Avg Bid)
    $48 Avg Bid
    13 bids
    patent drawings 3 days left
    VERIFIED

    I have 2D vector CAD drawings that need to be cleaned up and prepared for patent drawings. approximately 10 drawings plus 1 drawing made from a photo. only people with prior design patent drawings or design patent illustration knowledge.

    $190 (Avg Bid)
    $190 Avg Bid
    15 bids

    There is a design for which I need CAD/DXF drawing so that it can be laser cut on MDF sheet. The golden mesh as can be seen on the enclosed file.

    $24 (Avg Bid)
    $24 Avg Bid
    13 bids

    ...renderings for the interior and exterior of a houseboat. We will provide the CAD drawing that would illustrate the locations of the furniture and other equipment. We need the source file which will be used as a guide during the build. Some general points for consideration during the design process are listed below. 1. The exterior of the houseboat is cladded

    $978 (Avg Bid)
    $978 Avg Bid
    85 bids

    I am looking to build a prototype for a treadmill I am designing. I need a CAD design doing of my drawing.

    $63 (Avg Bid)
    $63 Avg Bid
    93 bids

    Hello here are my needs. -Fashion designer -Fashion designer drawing, CAD fashion drawing Basically anything I need to start my first few steps in the design process. Techpacks are also wanted

    $235 (Avg Bid)
    $235 Avg Bid
    9 bids

    I wanted urgently front facade 3d design including signage. I have attached reference image it needs to be based on that. I shall provide the cad drawing for the measurement and all other details. I do not have logo, so you need to make one simlar as seen in the image with our supermarket name.

    $65 (Avg Bid)
    $65 Avg Bid
    29 bids
    $22 Avg Bid
    25 bids

    ...are usually of a standard design; however, occasionally customers want a slightly odd frame made. Currently, I have a customer looking for a circular frame with 3 holes in it. I have a hand-drawn sketch (and photos of a similar frame: [login to view URL]) but need it turning into a CAD drawing so that I can give it to laser cutters/fabricators

    $33 (Avg Bid)
    $33 Avg Bid
    22 bids

    I need to create cad drawing from a skewtchup model. The model is 100mb and the site is 90metres x 50 metres containing 3 storey each buildings. There are 2 . plans are midway to be finished in cad, i need to complete windows opening dimensioning, services, lighting, landscape design etcetera.

    $170 (Avg Bid)
    $170 Avg Bid
    20 bids

    I need to design restaurant exterior located in a corner (2 sides). Sizes about Front 20ft. and side 30ft. (actual size would be sent by AutoCAD drawing) The restaurant is fast food and it should be modern style, with economy material that looks exceptional. Lighting can play also important role, in decoration. Photos are available, interior design

    $289 (Avg Bid)
    $289 Avg Bid
    81 bids

    Hello, I need about 50 simple drawings of wooden boxes. I am a flight case manufacturer, I manufacture various types of case, there are about 30 types of case designs, i need a simple drawing for each design. I attached an example of the drawing i need. i will need about 30 of the same format but eac...

    $167 (Avg Bid)
    $167 Avg Bid
    192 bids

    1- Lobby 3D design - Want it to be same Idea but new innovation and dentifrice style, I want your ideas on it. As well CAD is attached. 2- Saloon 3D and CAD ( Office 05 ), We want it to be same 100% ----------------------------------------- * Saloon 3D interior design: ( height 3.7m ) - 3D Max and Vray needed for this design. - 3D images and drowning

    $515 (Avg Bid)
    $515 Avg Bid
    26 bids

    I need the Strip layout 3d cad design (progressive die) of a very simple steel part. My input would be 1. The actual die 3d cad (its not accurate, components are not in their exact position) 2. A 2d drawing of the part with tolerances etc. 3. Blank measures: Material Thickness 4.89mm Width 74.00mm Length /

    $182 (Avg Bid)
    $182 Avg Bid
    32 bids

    I need some with clothing CAD expertise to design us a CAD drawing of our t-shirt design. This project is for multiple versions (minimum 5 different versions) of our design concept (only slight changes in the different versions). The design is mainly text based and we want the CAD design for multiple sizes (s, m, l, xl, x...

    $46 (Avg Bid)
    NDA
    $46 Avg Bid
    5 bids

    I am a Interior Decorator in Marietta, GA. I am in need of a CAD designer that knows how to perform Interior Design to jump furniture into a CAD drawing for a Medical office. I will have to present the drawing to a group of physicians.

    $238 (Avg Bid)
    $238 Avg Bid
    23 bids

    Hi Mahesh J, I have an assignment for school that I need to submit by this Friday. These are the instructions that I must follow. ——————————————————————— If you are competent with drawing, choose one room from your renovation ...

    $11 (Avg Bid)
    $11 Avg Bid
    1 bids

    I need someone to design a map layout of my facility based on off Google Maps. I have an example of the quality of work I'm looking for - see Aljoma drawing. My image is a base version for you to use. It's best to use it and Google Maps to make the CAD drawing. My company address is: 7205 Rose Ave. Lockhart, FL 32810 I need...

    $156 (Avg Bid)
    $156 Avg Bid
    14 bids

    I need a 3d CAD model that can bring an Idea to life for an upcoming kick-starter campaign. I have a VERY rough CAD drawing of the general Idea, but I lack the talent to finish and make it a reality. Multiple variants of the same basic design may be required if the original concept meets expectations, with additional payment for each model.

    $549 (Avg Bid)
    $549 Avg Bid
    127 bids

    as attached draft, I need someone do a CAD drawing and 3d model for my design. there will be A, B, C, D and E five detials: 1, A is top portion A-1 is pushing down area for fingers A-2 and A-3 are two weakenling line where the thickness is only 0.3mm (other place is 0.7mm or more) A-4 is a wide and thin pole or extension portion connected with pushing

    $73 (Avg Bid)
    $73 Avg Bid
    13 bids

    My name is Louis, I am an interior designer. I am curently working on a small cocktail bar in Hong Kong. I would need some help to do the CAD drawings, details drawings. Please find attached the floor plan of the bar without the design. I will provid the Stechup model. I would need Plans/ Elevations and details drawing. Many...

    $628 (Avg Bid)
    $628 Avg Bid
    77 bids

    I am seeking a CAD design service to draw a 3D model based on my detailed PDF vector plan drawings. See attached. The 3D drawing will be used by a plastic product maker to make a prototype for validation. The file type will need to be exported as required by

    $109 (Avg Bid)
    $109 Avg Bid
    27 bids

    ...Inspection Services - I am a self employed home , and commercial building inspector, and do design work on buildings up to 600m2 in building area. Looking for a revit /autocad drafting help, many projects are coming in daily and cannot handle currently. I have help from a very talented draftsman, but too much work, need additional help. I need someon...

    $143 (Avg Bid)
    $143 Avg Bid
    13 bids

    I have a simple 1 page pdf for a gate design. Need someone to convert it into a CAD drawing

    $106 (Avg Bid)
    $106 Avg Bid
    254 bids

    I need a professional to design my carrying case for our headset. We expect you to deliver following files, - 2D CAD drawing file with all dimension and 3D model with 2 renders minimum - Need to have multiple views, open and close box, front and back The first 2 renders must be done within 2 days. The photo in attachment is just a sample, I want

    $173 (Avg Bid)
    $173 Avg Bid
    17 bids

    I'm a home remodeling contractor that needs a section of a Kitchen (already built) drawn up in CAD so I can sent to metal fabriactor to design a metal staircase. I would need an elevation drawing and a floor plan of the first and 2nd floors at this area. It's a small area in the corner of the kitchen where the ceiling opens up to a landing on...

    $352 (Avg Bid)
    $352 Avg Bid
    17 bids

    Both required in Cad and PDF (for presentation to client) with our company details. Product: rubber cover plate with metal insert. Usage: parking areas. These are bolted on one side instaleed over gaps on buildings allowing vehicle movement. 1. For the attached autocad drawing, i need a cross sectional and 3D drawing. Provision of bolting to be

    $68 (Avg Bid)
    Guaranteed
    $68
    4 entries
    Trophy icon Band T-shirt design Ended

    Hey there! So we're an alternative rock Los Angeles-based female-fronted band called Chase the Comet. We need a design for our new merch shirt. It should be maximum 3 colors (bright colors or just monochrome), look cool AF (obviously, see examples below!!! Again, please SEE EXAMPLES BELOW!!!:), have our band name (and not necessarily our logo)

    $75 (Avg Bid)
    Guaranteed
    $75
    32 entries

    I need a 3D model of something. I need a technical drawing (cad or similar) based off sketches so that I can take to a fabrication place and have my design built.

    $71 (Avg Bid)
    $71 Avg Bid
    41 bids

    I want somebody with strong Mechanical Engineering knowledge to help me to do some theoretical calculations regarding the model I have attached in the [login to view URL] main task is to calculate theoretically then finding out if the ansys values matches the values we calculated. I will provide the CAD drawing of the whole system. All you need to do is

    $322 (Avg Bid)
    $322 Avg Bid
    45 bids

    I need a CAD drafter specialled in Interior Design to do a working ID drawing for a retail project (attached in JPG format) and contain the following: - Reflected Ceiling plan. - 4 elevations. - Detailed sections - Furniture Layout. - Miscellaneous details. * Attached a sample dwg file as a reference. * Deadline after one week.

    $185 (Avg Bid)
    $185 Avg Bid
    2 bids

    I need a CAD drafter specialled in Interior Design to do a working ID drawing for a retail project (attached in JPG format) and contain the following: - Reflected Ceiling plan. - 4 elevations. - Detailed sections - Furniture Layout. - Miscellaneous details. * Attached a sample dwg file as a reference. * Deadline after one week.

    $266 (Avg Bid)
    $266 Avg Bid
    49 bids

    I have an idea for a golf product that I think would be fairly simple to draw and build. I need a design drawing done so that I can try and get it made and see if it is feasible and useful. 3D rendering would be a plus, but CAD drawing is most important.

    $226 (Avg Bid)
    $226 Avg Bid
    12 bids

    Hello we are having a sketchup model of a staircase that we need to modify. There will not be CAD drawing, you will have to model it in 3D directly. I will provide the current 3D sketccup file we are having and a reference picture. Once done we need a basic rendering of it . I am posting attached : the render view of the current staircase and a picture

    $30 (Avg Bid)
    $30 Avg Bid
    34 bids

    I have a drawing of eyewear I would like to laser cut, but the proportions might be a little off, so I need someone who has experience with designing eyewear to modify the design and make it in CAD format.

    $54 (Avg Bid)
    $54 Avg Bid
    30 bids

    I need someone to make a CAD design sent in PDF form to me and CAD form to my fabricator with sizes, spacing etc noted on the drawing. It will involve taking a design off of a picture or a modified picture with notated changes.

    $42 (Avg Bid)
    $42 Avg Bid
    47 bids

    I’m imagining a head shot drawing, in shades of grey (black and white included) of my pup’s head. It’s very hairy and her head looks like a ball of fur. You can see many pictures of her on her Facebook page [login to view URL], and this is one of her best latest headshot [login to view URL]:0 She must

    $20 (Avg Bid)
    Guaranteed
    $20
    27 entries

    Hello I need construction drawings completed in accordance with AS 1100. I have designed a building and have the model in sketch up and preliminary drawing in auto-cad. I also have an example for you to look at. THESE DRAWINGS HAVE TO BE COMPLETED WITHIN AUSTRALIAN STANDARDS. (If you don't know the standards please don't reply) I ...

    $236 (Avg Bid)
    $236 Avg Bid
    25 bids

    ...is cad file for site plan, need 2 plans, show before and after. must show drainage around the newly proposed structure (the 20x30). I need done my Monday morning . if you have done this type of work.. it is very simple i have included an auto cad drawing, as well as a screen shot of topos, which will be needed to be added to cad fil...

    $170 (Avg Bid)
    $170
    14 entries

    I need an Engineer to design a product with manufacture ready CAD drawings. The only materials needed for this project are springs and plastic (or any lite weight plastic like material). I already have a generic CAD drawing but need to be revised upon.

    $531 (Avg Bid)
    $531 Avg Bid
    50 bids

    I have ramps and platform made out of engineering wood and I need the structural design for it with shop drawing. I will upload the drawing PDF and Cad format. See below load requirements : Load Value: acc. to DIN EN 12825 Concentrated load acc. to DIN EN 13213:5 kN Failure load acc. to DIN EN 13213:10 kN Load Value: acc. to DIN ...

    $586 (Avg Bid)
    $586 Avg Bid
    19 bids

    Hi, need to create a 3D design of a product (electronic device) with Animated 3D Modeling. We need: Creative Visualization 3D modelling Engineering and Technical drawing of patent design and modelling I have made a montage of photos to give you a starting idea. But I'd like the final device to look different to avoid plagiarism. Budjet

    $117 (Avg Bid)
    $117 Avg Bid
    14 bids

    I have an inventors heart and mind but not the technical skills to get my ideas from my head to paper. I am ready to submit my design idea for a patent but need a drawing and hopefully an animated modeling of how it will [login to view URL] experienced CAD (or similar) freelancer could probably get it done relatively quickly. I know that's not ...

    $230 (Avg Bid)
    $230 Avg Bid
    36 bids

    I have a clear design of the shower basket made of cristal plant material together with the cad drawing and a sketch of what i want to achieve. there is also a semi-finished model file on c4d for better reference. I need for you to model it well and have 1 render of the product in perspective and another within a bathroom scene.

    $189 (Avg Bid)
    $189 Avg Bid
    30 bids

    Need somebody in the south of England or London to work with me bringing my product to life. I will need a consumer product designer to create the cad drawing to go into manufacture. I will be paying for the person to carry out my design requests and would also want the person to become a small shareholder in my company to continue to do ongoing cad

    $3813 (Avg Bid)
    $3813 Avg Bid
    2 bids

    I need 1 or 2 point perspective drawing for this kitchen design. I pencil sketch or cad.

    $164 (Avg Bid)
    $164 Avg Bid
    7 bids

    I have a concept for a skeleton wrist watch that I need sketched and then modeled in 3D. I have a pretty good idea of what i want but would like to see some sketches / mockups before taking it to the manufacturer This will be going to the factory for them to complete the molds and start production. Please attached samples of previous work.

    $288 (Avg Bid)
    $288 Avg Bid
    46 bids

    I need some graphic design. Metal Fabrication shop needs CAD Drawing of exterior gazebo steel frame 281”L x 214” w x 113 High. made from steel rectangular tubes. We have all dimensions ready. We need the CAD drawing for our vendor to quote laser cutting all the materials for us. Need done ASAP

    $496 (Avg Bid)
    $496 Avg Bid
    12 bids

    I need you to create a 2d layout & elevation for a laboratory furniture project. I have attached 3 files: 1: measurements: Measurements of the desired location (furniture to be placed here) 2. Furniture placement: Top view of the furniture placement two beige items are two laboratory equipments 3. Elevation example: I need an auto cad drawing

    $26 (Avg Bid)
    $26 Avg Bid
    9 bids