Civil Engineering Jobs

Develop boq quantity, gusset,plate with full material detailing according to GA Drawing

Hi! I am looking for a professional auto cad architect who's advise me on my office layout of 570 ft

Hi I need a technical drawing for wall mounted articulated jib crane for 1 ton. 16 ft long Photo attached

Design specifications: The gap of L=1.5 m (clear span of the bridge model) needs to be bridged using any wood material. Any material can be used to join parts. The bridge needs to sustain three concentrated loads of 7.0 kg, 5.0 kg and 4.0 kg, without breaking (i.e. the mass to be supported by the bridge without falling onto the ground); three buckets with handle will be utilized to apply the concentrated loads along the bridge model. Appropriate attachment arrangements must be included in the design of the model (e.g hooks), to support the plastic buckets. The weight of the attachments will not be included in the weight of the bridge. The attachments should be placed along the bridge model at the indicated positions. The points A and B must be marked on the bridge model. The structu...

I have modelled a steel building on staad pro and have assigned design parameters too. I want some one to optimize the steel sections and design the different connections and give me the detailed drawing.

Pipe that rotates from a straight to a 90 degree.

We are looking for a MEP consultant on hourly basis work.

i need a architect for hill house plan service need to provide 1. Space planning 2. Elevation 3. Structure design 4. All Services

We are a NGO Trust, planning to launch a Charitable Old Age Home with all Assisted living benefits that includes Basic Medical Care, Accommodation, Kitchen and other amenities. Looking for someone who has an experience of having built/worked on such projects.

Need building plan drawn up on the premise land with scales

floor plan design for hill area

We need a structural engineer to do done calculations advice improving structural capabilities on a roof which is of non standard construction with Coro tile . We want to change roof but need to know what needs to be done to carry additional weight etc .

hello, i have some images taken for bridges cracks, i want find an expert to use an automatic method to detect the cracks from the images using Deep Learning. please find the attached image as an example

Complex MS Project 2010 Electrical installation Project. We need help to assign work, duration and produce labour histrogram.

We are moving our factory to another location with pretty much the same size( footprint). We have complete PDF plans for Architechtural , STRUCTURAL, MEP, & ELECTRICAL which we just need copied to a new set of PLANS with some minor deletions and changes for the new location. We need a good draftsman to do this job for us with good experience in all of the above areas.

Build home but the Engineer has given me rough plan of Gr floor and 1st floor sloping roof top All work is completed but wanted plan of the house

i am a contractor am working on a project in mexico,am about to start a university building i need a freelancer who is good in drawing out a building plan

I'm a homeowner looking for someone who is familiar with the Ontario Building Code and that can produce permit drawings, for several projects around my home. Located in Innisfil, Ontario, Canada

I want to Remove load bearing wall

I want to Remove load bearing wall

am looking to get plans for a mini split HVAC system for a 4 unit apartment building. I have the electrical plans done, but I need mechanical plans done for permitting. The work is installed but not connected. I can have our contractor provide photos, videos and/or measurements. Provide stamped drawings and brief narrative responses for permitting. Needs to be done by an Arizona registered professional.

We are looking for a designer, who knows how to use the autocad software, and who develops the technical scheme of the pool and the accessories that characterize it by designing the perimeter of the pool using the modularity of our production and inserting the accessories provided. It is an assignment that leads to a certain repetition, as each new project requires the modification of a similar project, based on different dimensions, and different accessories. The relationship will be long-lasting and will involve the development of several projects about 5/10 every month. Knowledge of autocad design software is required

i require a structural engineer to confirm this 'wall' is non structural or loadbaring

we have a basic louver design H= 4750mm W= 15400mm with motorized sliding door. we need a structural design for the steel structure FRAME including the concrete raft foundation.

Replacing trusses on my house. Need someone to create truss detail documents

Hi, Design only. we need a concrete pavement design for a 20-40mtr concrete access way 4 mtrs wide with kerb and channel. 2 small timber retaining walls support the road on the ,lower set. we need to design a small pedestrian path off the side of the driveway. we need this to be supplied to council for building consent. Here is bit of a run down on what we have here. This is the local councils GDC (Gisborne District Councils) GIS system Hany tool for our work. The property here within is 71 Seddon Crs Whataupoko Gisborne 4010 What we need access design help with: Attached is resource consent and supporting civil plan. PDF We have an approved Resource consent: (DA) Part of the resource consent conditions are the right to access to the property via a council paper road, acce...

need a certified AZ engineer to stamp pre drawn plans for a basic garage to submit

Looking for a professional engineer to perform a waste flow characterization on our house property that is on well water and septic per county requirements.

We are an electrical contractor and we have excavated and installed formwork and rebar for a parking lot pole fixture. We were informed by the municipality that they require stamped engineering drawings before they will inspect and approve us to pour concrete. I have made as-built drawings showing what we installed. We need a Missouri licensed structural engineer to either A) sign off on the as-builts, or B) redesign the drawing and we will make adjustments to the existing work to meet code. As built drawings are attached. The pole is an existing 4" x 25' square steel pole, 11ga. As this is a pole that was previously installed at the same site, I do not have a spec sheet. (2) fixtures will be direct arm mounted in a 180 degree orientation to each other at the top of the po...

I would like to hire a Florida based PE, RA or draftsman to update/correct existing home addition plans and make them FBC compliant so that I can apply for build permits. Current plans are missing key details and need corrections on each elevation, but the design itself is basically complete. Because I would rather have one point of contact, applicant must have partners/contacts to help get the plans signed/sealed. I would like a site visit if local, but it is not required. This will be the first of three properties that I need to build out in the next year, so a long term arrangement is possible. I have CAD files as well.

An Excel program or a mathcad file for a concrete pile verification with Eurocode 2. 1- verify the geometry of the pile 2- verify the Area of reinforcement 3- verify the shear reinforcement 4- verify the loads More details will be shared after assigning the project

looking for someone who can create bank branch layout like this

Need a foundation design for a small 2 m x 2m steel structure with four legs and a stere case.

Review and check specifications on plans and details to verify if concrete retaining wall design will be sufficient for load bearing requirements. Must provide complete calculations in professional format PDF.

Looking for a professional architect who can design and provide full set of architectural + structural drawings for a 45’ container home

I have a carport that is 36 feet long and 11 feet wide with one side supported by the house and the other by 7 posts each bolted down and 6 feet apart. I want to remove 2 posts and replace them with cables on top and on the bottom so the load is carried by the post 12 feet in from the outermost corner. The cables will be installed just like bridge support cables per the attached drawing. The carport must be able to hold 15 inches of snow. The goal is to show the city building department that this has been reviewed and certified by an acceptable engineer to the city. I have no idea what the city requires. The city is Chino Valley Arizona.

Hi Christopher F., 14Hrs for Aluminum pergola work

Tasker: I'm moving in a Jewlery Safe (approx 1,500 pounds) into my building. I need a report that says it's okay for the safe to be in my room (the floor will withstand the weight). Background: The report I will need is just a formality required by building management. It's a commercial building with metal/concrete support. I don't see any issue with the safe being there as it's a commercial building. The safe weighs approx. 1,500 pounds. What you'll be provided: * Floor Plans * The Suite #

I have Revit files, I want to put them on Etabs, today! The plan is easy and clear, consisting of cement, a ground floor, a first floor and a roof, consisting of 3 sections, namely apartments, penthouses, 3 villas, the version required for Etabs 2019 . and to be sure, it must be completed today.

I have a structural design of my house plan. i need to change it.

We are executing a project at Kurnool where we need an experienced Civil Engineer on monthly basis for Supervision and Protocol Signing at different stages of the Civil Foundation works for a 220kV Substation. We can arrange accommodation and transport to site. Since Civil Works are in progress, expected duration of stay is 2-3 months.

Need structural plans for inground pool los Angeles California. Pool plans will be provided. Plans will need to be signed and stamped by engineer. Thank you

I have a project and i need to confirm the parameters and confirm a retaining wall design

MEP residential building 2 storey in California You must be familiar in Ca builing code . Please don' tapply if you can't do it Thanks

I am trying to modify the trusses in our kitchen bump out area and need to see if its possible to remove or modify the bottom Chords.

Civil engineers plan, oversee, and implement strategies that create or bolster public and private infrastructure. These include constructs such as sewer management, potable water distribution, telemetry system implementation, power lines (in conjunction with electrical engineers), and dams. More-common images that come to mind include buildings, roads, and bridges. Each bolt in the overpass and every strip of weatherstripping in your office was once approved by a civil engineer. Reaching back to times before electricity, constructs such as aqueducts, the road systems of Rome, the Greek Parthenon, ships, and more all relied on civil engineers, though they may have been given different titles at that time. In this section, we will cover a sample job description, exploring the daily respo...

I am needing structural details (framing plan) in the form of a wall cross section drawing with specs, size, and spacing for wall studs, sheathing, floor joists, ceiling joists, roof, roof deck, etc. House is already designed. Around 5,400 SF. Needing this done asap to get my permit.

We plan to build 5 houses, We need detailed plans for buildings, Services & Road drawings

I need an elevation and site plan to apply to get a piece of Land from our City