Product Design Jobs

Product design can be defined as idea and concept development related to a physical object or service. Product designers evaluate and conceptualize ideas and make them into tangible products using a systematic approach. If you need help with product design activities, you can hire talented freelancers for the same. Simply post your product design job today to get started!

Hire Product Designers

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    70 jobs found, pricing in SGD
    Product packaging designer 6 days left
    VERIFIED

    We’re looking for professional packaging designer for our Olive products. i.e Olive Oil bottle, Extra virgin Olive Oil bottle, Olive soap, Olive shampoo, Olive moisture, Olive lip-balm, Olive tea bags.

    $156 (Avg Bid)
    $156 Avg Bid
    19 bids

    standup pouch label design product- yeast powder

    $28 (Avg Bid)
    $28 Avg Bid
    16 bids

    I need a customized packaging design for a deodorant. The design must take into account the following requirements: * Roll on mechanism. No "push up" disk *Materials Option 1- ecologic compostable: paper, carbon. *Materials Option 2 - aluminum for refill deodorant bar.

    $50 / hr (Avg Bid)
    $50 / hr Avg Bid
    19 bids
    Manufacturing Assistant 6 days left
    VERIFIED

    Looking for someone to help manufacture and ship apparel products.

    $22 (Avg Bid)
    $22 Avg Bid
    3 bids

    I am looking for a design Engineer with a detailed knowledge of Pneumatics and fluid dynamics to assist with the design of a bespoke tool. Must be familiar with solenoid valves and other fast opening valves used with compressed air. Experience with high pressure systems or tools and ballistics would be advantageous. Desired Outputs 1. Specific Engineering advice to address my design problem 2. A lookup table and formula which may incorporate the following variables: a. Pressure b. Air Volume c. Barrell Length d. Projectile Weight e. Valve type/ opening speed/ Kv Value Further details will be provided following discussion

    $1283 (Avg Bid)
    $1283 Avg Bid
    15 bids

    Hi I'm looking to design a clamping system similar to the AMF-Zero-Point system (see youtube video: ) for a different application that work-holding. Looking for a parametrized model of this clamp (minus the hydraulic / pneumatic actuators) so I can make modifications to dimensions later. Thanks!

    $29 / hr (Avg Bid)
    $29 / hr Avg Bid
    19 bids

    I need an architect to design all house plans for an ADU in FL to be able to submit to an engineer for stamping. I already have the design and dimensions done with a designer..

    $579 (Avg Bid)
    $579 Avg Bid
    21 bids
    Merchandise design 6 days left
    VERIFIED

    We are Swrlies infused frozen yogurt and ice cream. We are very unique styly of service. We infuse/mix each serving with cereals and natural fruits with our drilling machine. We are looking for a fun and artistic design that represents us. Something with ice cream and a drill. This is will be used for shirts. Also, I need a design of 2 letters from our name SWRLIES. I want SW overlapping each other with some drips falling off as the letters as it was ice cream melting and dripping.

    $109 (Avg Bid)
    $109 Avg Bid
    77 bids

    Looking for a technical lead with similar role in the past (added advantage) The prospective cofounder will manage ALL TECHNICAL issues that will arise through the functioning of the website. Cofounder will develop the website and mobile application

    $4133 (Avg Bid)
    $4133 Avg Bid
    55 bids
    detergent box packaging 6 days left
    VERIFIED

    want to design a packaging for detergent powder

    $117 (Avg Bid)
    $117 Avg Bid
    144 bids

    Designing a CAD model for a custom helmet. I have the design ideas and need someone to implement the design idea in solidworks.

    $168 (Avg Bid)
    $168 Avg Bid
    56 bids

    Conversion of acoustic data obtained through Ansys Fluid into audio file and extracting the acoustic pressure signal and spectrum charts

    $179 (Avg Bid)
    $179 Avg Bid
    10 bids
    Trophy icon EV charger front plate design 9 days left

    Our new EV charging station needs a mind blowing design to star on the front cover of the device!

    $291 (Avg Bid)
    Featured Guaranteed
    $291
    7 entries

    We want to convert a tent CAD into a a viable manufacturable product. We need a skilled solid works technician who is also creative to take the file and prepare it for production by adding fine details to the product, choosing materials, and suggesting improvements.

    $41 / hr (Avg Bid)
    $41 / hr Avg Bid
    65 bids
    Wall Flask 6 days left

    I have a product I'm trying to get manufactured and the company that I'm going through gave me a ridiculous quote to take my rough draft design and turn it into a professional design that is ready to be manufactured. The product is very simple its a water bottle for your wall basically that consists of a hard plastic bladder with a lid and a camelback-type hose and mouthpiece that comes out of the bottom. I would also like to have an indention in the back that can hook onto a command strip hook. The flask will hang on the wall via the command strip hook. I will attach my rough draft in a .stp file.

    $121 (Avg Bid)
    $121 Avg Bid
    19 bids
    Nike Aventura 5 days left

    We need shop drawing for HVAC and Electrical

    $7914 (Avg Bid)
    $7914 Avg Bid
    14 bids

    Small batch production of dress samples and need pattern made of designs to begin

    $455 (Avg Bid)
    $455 Avg Bid
    35 bids
    Trophy icon Dookie Blasters 12 days left

    I want a fictional product label to put on small plastic bottles. I'd like it to look kind of 90s retro, but not full on jazz design. The bottles are about 6" tall and 2" in diameter. The product is "Duke E. Blaster's Dookie Blasters," with a tagline of "Got Dookie? BLAST IT!" I'm thinking have "8oz (237ml)" at the bottom, or other product info to make it seem legitimate. For some reason in my head I had a blue grid with a white background, like graphing paper. I think that's just how designs in my head get started, lol.

    $34 (Avg Bid)
    $34
    3 entries

    We need to redesign an existing stall

    $131 (Avg Bid)
    $131 Avg Bid
    24 bids
    Sensor Housing 5 days left

    Sensor Housing Specifications: The housing will be 110mm in length. It's diameter is 60mm. The housing will be split on the horizontal. The housing screws together. Has 2cm holes for airflow. The housing will be designed using Solidworks. We can supply the original housing that has the screw holes.

    $119 (Avg Bid)
    $119 Avg Bid
    65 bids

    Creating dipaer bags for mothers and fathers I have the basic concepts and basic prototypes but need to perfect it. Make them more user friendly. For example, the backpack need to be ergodyanmic. The running belt has to have the correct features for exercise and for baby.

    $4966 (Avg Bid)
    $4966 Avg Bid
    10 bids

    I am an upcoming Jewelry designer and believe in eclectic, unique design asthetic. Need a CAD designer who can help convert designs from manual drawings

    $17 / hr (Avg Bid)
    $17 / hr Avg Bid
    22 bids
    Product design 5 days left

    I am looking to invent a product that cools down food for baby's/children. I have ideas but i need help putting into reality.

    $574 (Avg Bid)
    $574 Avg Bid
    123 bids
    Trophy icon design a soft foam foot/leg rest 8 days left

    This foot rest needs to be adjustable, I will use this foot rest to support my calf, lower leg and feet. This will go into my airplane. There are some on the market that are square and only support the feet. However I need to design one that can support the lower part of my legs and behind my knee. the measurements can be 2 feet in tall and 2 feet wide and can slope down to 5 inches.

    $1385 (Avg Bid)
    Featured Guaranteed Sealed Top Contest NDA
    $1385
    33 entries

    needing a food/ dietetics scientist to assist with development.

    $3618 (Avg Bid)
    $3618 Avg Bid
    12 bids

    This pair of tongs shown in the video has two arms connected by a hinge held together by a circular spring. As this pair of tongs is biased open, the two arms will spread wide apart when not in use taking up too much drawer space. The object of this contest is to design a SIMPLE AND ELEGANT locking mechanism that will lock/hold the two arms closed when at rest.

    $55 (Avg Bid)
    Guaranteed
    $55
    12 entries

    I have an adapter made to adapt an engine to transmission (A), but I want to create two engine adapters to adapt transmission (B) and transmission (C) to the engine instead. I am located in Maryland (USA) and will not ship the components to any location, but willing to drive the components within a reasonable distance for the scans to be completed.

    $345 - $1035
    Local Sealed NDA
    $345 - $1035
    10 bids
    $29 Avg Bid
    28 bids

    I am designing two PCBs (a RF emitter and a RF receiver) and I would like to find someone to give me a hand with it. A summary of specs is presented below: - The emitter (Tx pcb) it is like a keyfob. It should incorporate an encoder (HT12D or similar) along with an RF emitter IC and a PCB printed antenna. This board will be powered with a coin cell (3V). There will be only 2 inputs coming into the encoder. - The receiver (Rx pcb) should incorporate a decoder (HT12E or similar) along with a RF receiver IC and a PCB printed antenna. This board will be powered with a single LiPo Battery (3.7V). There will be 4 outputs. This board should also incorporate a LiPo charging management circuit (TP4056 + DW01 + FS8205) and a DC-DC boost IC (MT3608 or similar) since one of the outputs requires 12...

    $236 (Avg Bid)
    $236 Avg Bid
    30 bids
    Design a perfume packaging 4 days left
    VERIFIED

    Hello, I am looking for a designer that can create the design of a secondary packaging for perfume. The technical drawing and visual will be provided. Thanks

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    120 bids
    i need electronics enginer 4 days left
    VERIFIED

    can you design electrical product

    $36 (Avg Bid)
    $36 Avg Bid
    12 bids

    Please create a 4 seat golf cart with all seats facing forward. In the area at the back where the golf clubs go we need to be able to put a boot. That is, sometimes use for golf clubs. Other times take out golf clubs and put in plastic tube that has style so looks like trunk of car. With a lid.

    $196 (Avg Bid)
    Guaranteed
    $196
    2 entries

    I need a PCB Designer to make wave pallet & Router IGS and STP file

    $240 (Avg Bid)
    $240 Avg Bid
    7 bids
    Trophy icon Concept product desgn 4 days left

    I need to obtain concept design images for a new product - gumboot. The images attached are for visual cue but cannot be copied as they are existing products and likely have existing IP. Requirements for the product: Think / chunky sole (rubber) Front and back pull on loops stretchy fabric section to allow the boot to stretch to get it on the foot Heavily bold and rounded toe

    $290 (Avg Bid)
    Guaranteed Sealed
    $290
    9 entries
    Trophy icon Packaging design 5 days left

    Hi! I need to design packaging bags for tea. Tea has been Hand rolled into ball-like shape. 2 different bag sizes. Small and medium. 1st size is 90mm length, 120mm height, 50mm width. (will contain 3 tea balls) 2nd bag size is 90x180x50 (will contain 10 tea balls) Each bag has 5 design areas: front and back, left side, right side and bottom. So please prepare 5 different files for each bag (total will be 10 files because there is 5 for small bag and 5 for medium bag). Files should be made in Vector format Adobe Illustrator! And CMYK colors please! My brand logo should be placed somewhere on the front side for sure, on other sides up to you. The name of the tea is: Moonlight Dragon Ball White Tea. This name also for sure needs to be on the front side somewhere. Other sides up to you. ...

    $276 (Avg Bid)
    Featured Guaranteed Top Contest
    $276
    16 entries

    Trying to make a athletic shoe similar to SIA and yeezy. My brand is TVA (team v athletics). Like to use durable materials that are cost effective and need to be comfy on soles

    $1133 (Avg Bid)
    $1133 Avg Bid
    17 bids

    3D modeling specifically dining tables, coffee tables, chairs and desks.

    $537 (Avg Bid)
    $537 Avg Bid
    110 bids

    Klean Max for pets It is an organic product it can be used as a shampoo or a deodorizer the Qatar logo is a must and should be there under specific dimensions you can find it in the attachment the current label is attached and I need something much better than that. good luck

    $345 (Avg Bid)
    Guaranteed
    $345
    39 entries
    rf engineer 3 days left

    indoor cellular covarage planning for small venues like hotels , medium vemues like shoping malls and large venues like stadiums and airports

    $866 (Avg Bid)
    $866 Avg Bid
    3 bids
    Trophy icon Design Gloves Brand 6 days left

    Need to create Brand Box for our Gloves Brand "Humboldt". They are Nitrile Powder Free examination gloves. We want to check ideas from designers se we can have a professional brand we could sell either to medical, dental and food processing plants. All cases have 100 gloves. We will need sizes from XS, S, M, L to XL. Since we don't have an idea of colors or design, we want to share some ideas we found as very good ones.

    $76 (Avg Bid)
    Guaranteed
    $76
    11 entries
    Trophy icon I need a logo designed 3 days left

    I have a business started called centerline, all lower case. I would like a simple but, applicable logo to push my business forward. I sell to oil and gas, electrical, contractors, utility locators, surveyors and irrigation contractors. I sell inverted paint, pin flags plain and custom, underground marking tape, survey ribbon, pennant flagging and fiberglass utility markers.

    $414 (Avg Bid)
    Guaranteed
    $414
    1065 entries

    to help reconfigure an HVAC system that is malodorous in a home.

    $69 / hr (Avg Bid)
    $69 / hr Avg Bid
    10 bids

    I need a Product Mockup looking similar to the files and the based on the colour schmes of this website:

    $201 (Avg Bid)
    $201 Avg Bid
    44 bids

    We are a Hong Kong company looking for designer for our product lines, mainly sanitisers and air purifying liquid.

    $95 (Avg Bid)
    $95 Avg Bid
    131 bids

    making small leather accessories (lined, using sewing machine) - using recycled soft leather

    $804 (Avg Bid)
    $804 Avg Bid
    15 bids

    I work with a lighting company called Morris. () We are looking for an additional freelancer experienced in AGI32 to help us work on lighting layouts projects that we receive. We receive various project requests from offices, parking lots, sports fields, shooting ranges, and more. Let me know if you are available and would like to work with us. Best Regards, Daniel Elliott Product Management Specialist

    $28 / hr (Avg Bid)
    $28 / hr Avg Bid
    12 bids

    Looking for someone with experience designing accessories for small figures. Please see the attached files for examples. You will need to design accessories similar to the attached files shown. If you have experience designs things like this, please provide reference to what you have made in the past as it will help during the selection processes. I'm looking for someone to design approximately 20 miniature accessories in total, that are similar to the example files shown. (detailed photos of the actual items will be provided for reference).

    $432 (Avg Bid)
    $432 Avg Bid
    46 bids

    Sew sample of soft toy. Design pattern will be given along with the fabric.

    $28 (Avg Bid)
    $28 Avg Bid
    5 bids

    I am looking for a full design with layout , 3 d mechanical and electrical work for a bergola at my beach house The bergola shade can be from concrete or steel but must be fully shaded not just beams It should have the following main elements 1- small outdoor cocking area with bbq, fridge , pizza oven , sink and ice maker 2- bar counter 3 / dining area for 8 4 seating area facing the sea The width can be more than 3 meter but the length is open up to 8 meters if needed Please see attached picture for area Please show me some of your work before biding

    $429 (Avg Bid)
    $429 Avg Bid
    35 bids

    Top Product Design Community Articles