Design A Product Artwork

Hi We need a rough artwork file to send to our manufacturer based off the classic Yupoong Snapback model 6089M and 5089M ([login to view URL]) Here's the kind of illustration we need done : [login to view URL] 3 views are required : Front, Top and Bottom. Use the Navy 19-4025 PMS color code. Front View : Example : [login to view URL] Represent the cap laid flat viewed from the front. We will see a slight difference in the top-button that ties all panels together above the cap because our model will use a pentagonal button instead of a round button. Maybe just a line so that we know it's not round. On the 5-panel model, that's about the only difference we will see compared to a standard cap. However on the 6-panel, we will see that the breathing holes (small holes centered on each panel around the top) are star-shaped instead of just circular. Top View : Example : [login to view URL] Represent the cap laid flat viewed from above. This view will help to better see the pentagonal top-button and the star-shaped breathing holes. Bottom View : Example : [login to view URL] Represent the cap laid flat viewed from below. This view allows to specify some variations for the flip side of the brim (most Yupoong hats feature the classic green visor for example). You have to specify that the brim will use the same color as the hat. There's a line of material that's used to stitch each panel together and is visible inside the caps. Here's a picture for your reference : [login to view URL] Instead of "Damn son, where'd you find this?" however it would be our logo with "Different & Together" Finally, the metallic pin that is tied with the top pentagonal button will be punched with our logo. If you have any questions don't hesitate to ask and I'll do my best to answer. Good luck to the bidders!