OneWire or TwoWire LED chaser design

€30-250 EUR

In Progress

Posted

about 6 years ago

€30-250 EUR

Paid on delivery

I need to design a LED chaser that will be powered by a 12V battery. It needs to have a master PCB which will control all the slaves connected. The slaves will be chained together and distanced about 5 meters apart with a 4-pin connector IN and 4-pin connector OUT. Each slave will have a 12V lamp attached and switched by a mosfet. The requirement is to make a plan on what microcontroller, ic's and other parts to use, and which technologies to use to achieve this. Create a prototype on ready made hardware like an Arduino or similar. And develop the code which will run this. Preferably something cheap and accessible and easy to use like this: [login to view URL] But if the Arduino hardware and toolchain cannot achieve this then anything is acceptable. The PCB layout and design ill make myself once the plan is prototyped. You will develop the code. A big note to look out for is that OneWire or TwoWire is a must, there cant be more then 4 wires. Also the slaves (slave1, slave2, slave3, slaveN) can be connected in any order (so no marking's on the slaves that this is number 1 connect it to the master, this is number 2 connect it after slave1 etc.)

Arduino

Electrical Engineering

Electronics

Embedded Software

Microcontroller

Project ID: 16369135

About the project

14 proposals

Remote project

Active 6 yrs ago

Looking to make some money?

Email address

Benefits of bidding on Freelancer

Set your budget and timeframe

Get paid for your work

Outline your proposal

It's free to sign up and bid on jobs

Awarded to:

@dbartolovic

Pozdrav! Sličan projekt koji sam radio je LED display na kotaču bicikla. Koristili smo one "pametne" LED trake koje funkcioniraju na sličan način kao ovo što vi želite napraviti. To sam radio sa Arduinom i bio je dovoljno brz. Koliko sam shvatio projekt čini mi se da bi I2C sučelje bilo najbolje. Za slave nodove može ići i nešto slabije od Arduina ako je veličina i cijena bitna. Na primjer nešto iz ATTiny porodice. Nadam se da ćemo surađivati. Lijep pozdrav!

€55 EUR in 3 days

5.0

(4 reviews)

2.0

14 freelancers are bidding on average €239 EUR for this job

@ExpertEngineer7

I am arduino expert and embedded system electronics engineer and have worked on wireless control of color patterns of LED striipps on christmas tree. Please consider sending me a message so that we can discuss further

€100 EUR in 5 days

5.0

(20 reviews)

6.6

@aliserbetci

Hi, I have done similar project like this one. I can use WS2811 one wire and control each LED how you want. We can discuss all details over the chat. All the BEST, Ali SERBETCI

€250 EUR in 7 days

5.0

(34 reviews)

6.5

@seshupower

Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded design & programming using pic, dspic controllers and MATLAB codding for Power projects, Boot loaders, Bluetooth & GPS designs,CAN communication, EEprom. UART , RF circuits ,Protocols for networking, wi-Fi routers,OBD diagnosis with CAN bus protocols, Electrical vehicles and AC drives, stepper motor controls. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, synchronous rectifiers, Solar MPPT chargers, Solar trackers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion.

€1,111 EUR in 20 days

4.9

(61 reviews)

6.7

@MIKY4227

Senior ENGINEER. have at least 40 years experience developing Hardware and Software Expertise in video processing and associated simulation and evaluation tools and methods Producing Analog/Digital Video board designs, layouts and modifications; Verifying designs and layouts; Preparing documentation for manufacturing; Develop Digital/Analogue electronic board architecture and design by developing product concept; Researching, analyzing, selecting, and applying design concepts, approaches, techniques, and criteria; adapting and modifying board design alternative architectures; developing and evaluating new analogue/digital architectures and algorithms; defining functionality and requirement specifications; Developing board layout including size, performance, power consumption, and cost;

€222 EUR in 2 days

4.9

(49 reviews)

6.4

@binyameen441

Hi There I have checked your project description and understand everything. I am very confident that i can do this project perfectly. Thanks

€88 EUR in 3 days

4.9

(55 reviews)

5.1

@Manoj3050

Hi, I'm an electronic engineer with more than 5 years of experience in Arduino based systems development. I read your project description and decided to apply for the project as I have previous experience in designing LED systems with addressable LED light strips such as WS2812 LED strips. Also I have created systems which works as master slave way. So given the experience I have in this domain, I'm confident on completing this project successfully. I believe we can do this based on Arduino hardware and only thing on my concern is 4-5 meters length of wires would make a problem. But I think if we are using addressable LEDs we dont need separate slaves and can be controlled from one master as well as it has signal repeater built in. I'm looking forward to reply from you on this. Thank you Anusha

€250 EUR in 20 days

4.9

(30 reviews)

5.2

@soltracker

How r u?Bro,,,Its me imad,,,I have done it dozens of time,,,just a five min task........................,,u will feel brotherhood.....

€60 EUR in 3 days

4.5

(28 reviews)

4.1

@msppatil401

hi , I am interested on this job and i understand your requirement we will discuss more on chat. I have 6+ year experience in this field

€200 EUR in 6 days

4.0

(15 reviews)

4.5

@solomoncandy

At first look I would recommend running an I2C bus (2 wires) through the setup. It can run very long and you only have to use one microcontroller, the rest would be cheap ICs so it will end up very cheap. However, the max length may end-up as a deal breaker. Can you let me know how many of these lamps in succession do you aim to support? There is also a CAN bus protocol, again 2-wire, and it would definitely do the job but the components are a little costly. A custom protocol is an option too, you can bit-bang with a microcontroller at every node but again, not the cheapest option. Please message me in chat if you are interested and we can discuss this at length.

€180 EUR in 8 days

5.0

(1 review)

2.0

@husameng

Hello, I can help you with the pcb design for the slaves including UART receivers, mosfet, isolation, etc. and for the master also with the coding -arduino nano is satisfying- good luck husam - edit 1 if arduino is out of budget at89c2051 is a possible alternative.

€40 EUR in 3 days