Development of a PIC microcontroller firmware

A proposal has not yet been provided

Hi, I am expert in PIC Microcontroller. based embedded applications design and development. I would like to discuss the project in more details. Looking Forward, Khawaja

Hello, Have a great day. We are startup company offering services in Electronic product development. We will help you to write PIC program. Further more we will test the hardware at our end to make sure every thing works smoothly. Looking forward to work wit you. Best Regards, Shahbaz.

I am an Electrical Engineer having specialization in Electronics and Control, teaching in Electrical Department at FAST National University Pakistan. I am also persuing my MS degree in Electrical Engineering with specialization in CONTROL. I have taught the followings courses, and also done many projects related to these subjects as well as related to consumer electronics products. 1. Control System Design & Modelling (Continuous, Discrete, Linear, Non-Linear, Optimal, Fuzzy Logic + Matlab & Simulink) 2. Digital System/Logic Design (Verilog, VHDL, Logisim) 3. Micro-controllers (8051, Arduino, PIC) 4. Power Electronics (PSIM, MATLAB, PSpice) 5. Control of Electric Machine Drives 6. Circuit Analysis and Designe etc 7. PCB Design (Proteous + Ultiboard + Altium Designer) I assure you, if you assign your project to me, you surely gonna work with me in future. Note: I also provide the solution of mechanical engendering related projects.

Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded programming using pic and dspic controllers for Power projects, Boot loaders, EEprom. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, LED drivers, SMPS, Power supplies. I am ready to work for you. Please contact for further discussion.

Hello. I propose to approach the project in the following way: - use SDCC (the Small Device C Compiler) for compilation (I will consider one of the xc compilers if you really need it), - the CodeBlocks IDE for development (although I will consider MPLAB X if you really need it), and - if simulation is needed at some stage - gpsim (It may not be). I may also do some SPICE testing / simulation if appropriate - and can provide the relevant SPICE files if required. I would need the following before starting or accepting the project: - the schematics as soon as possible, - a clear explanation of the intended user interface, and - a description of how much work has already been done on designing the fuzzy logic controller, as well as an indication of whether or not this has to be designed from scratch or merely implemented in code. I do all of my development on Linux - and prefer to use open-source tools wherever possible (such as SDCC, etc.). This helps me to keep my - and your - costs down by avoiding licensing fees. If you require that one of Microchip's compilers - e.g. xc8 - is used, then please make that clear at the outset. (There is a small possibility it would affect my bid price.)

Hi, Thank you for posting such an interesting job here in freelancer. I would be please to offer my work in this regard as I have been working on PIC MCU for years. Please share some more details so that I can assist you in getting the right parts chosen for this purpose. I have more than 20 years of programming skills so the developed code will certainly run flawlessly and efficiently. Lets have some more discussion to proceed further. Timeline mentioned here is just based on the assumption of the work load, but will be fast enough depending on other logic behind the screen. Thank you very much and I look forward to hear from you. Regards... Roy

I have over 35 years experience as an electronic design engineer, please see my profile for more details The current price and timescales are only place holders to allow me to communicate with you I specilise in PIC18F micros and have implemented many similar projects to what you seem to require. If you think I can help then please send me further details Best Regards Dave Lelievre

Hello friend, I'm sure I am qualified to accomplish the tasks you propose. I am electrical engineer and have a wide experience in PIC programming, I have worked with SPI to acquire data from a compass and other devices as the thermocouple , also with I2C for different devices as RTC, memories, connection with other micro controller circuits, accelerometer, gyroscope among others. I have used PWM to control servomotors and DC motors with drivers. Also, I have worked with PIC16, PIC18 and PIC30, for this project I would select a ucontroller from PIC18 family. Even though I'm relatively new in this site I have several years of experience as researcher and lecturer of electrical engineering. I have worked with PICs for more than 10 years now. Finally, I'm a responsible person and every project I take up is because I'm sure I can accomplish it. I look forward to work with you. Best regards, MSc. Andry Contreras

Hello Dear, We are a team of experts with a cumulative experience of more than 50 years in the field of embedded systems, electronics, programming and Prototype development. Our experts have years of experience working with 8-bit, 16-bit and 32-bit architectures developing ultra-low power solution with complex computations. We have worked on almost all families of PIC MCUs. We have development tools like ICD-2 and Pickit3. We prefer working in MPLAB with hi-tech compilers. I have checked the details of your work and shared the same among my team. We have are ready to help you with a professional firmware developed for your requirements. We are also available for revisions. I am online and available for technical discussion. Regards Ch

I'm Electrical and Electronic engineering student currently preparing for the MEng program at the University of the West of England. I have recently completed my BEng in Electrical and Electronic Engineering at the same university. I have completed several subjects which include Microcontroller programming with assembly and MikroC. I have written a lot of MikroC codes for many projects. I will guarantee that I will work honestly and provide results quickly. Please feel free to contact me for further details. I'm also available on skype for more details. Thank you

Hi, I'm an experienced programmer both for PC and embedded programs. I've written many programs for different PIC microcontrollers from different families. I've used devices with SPI and I2C interfaces. I've got PIC Kit-3 to work with physical microcontrollers. Please give me some more info about the project Regards mokule

Hi. Very interesting project. I congratulate you on your initiative. First, for choosing our PIC we must consider that this provided a port for I2C (for user interface), another SPI port (for the temperature sensor using a MAX31855), and an output pin with PWM (for temperature control .... i do not know what type of actuator is used, maybe a heater ?? ... please let me know). With regard to the fuzzy logic, it is necessary to know the temperature range and type of application that will be used this control ..... this is for design the "fuzzification". Other questions: What kind of capacitive interface do you want to use? A single or multi-channel? Will the code for PIC control only temperature ? I would like to know more details please. Thanks Regards Pardo Darwin

10 years of experience in wide range of microcontrollers like PIC -16F,19F series, xscale processors. Can do the job in committed time with desired results.

No problem and expert quality work will be provided in optimum time Experiencd in PIC programming and robotics Thanks

Dear employer, I have great experience with microcontrollers (especially PICs), C programing and simulation in Proteus. If you like I can also make labview application for you. Best regards

Dear, I worked with all kinds of sensors and PIC controllers. It seems we can use smaller one but all depends on complexity of code. All the best, Miroslav Mrdjan

Hi I have gone through your requirements its not a complicated task but requires some time to be accomplished...... I have worked with PIC 12,16,18 series microcontrollers.... You can see the projects that i made using pic microcontroller on my website... I worked with all protocols I2C,SPI,UART, PWM generation etc and their are projects on my website in which i used these protocols extensively.... I can make the circuit here and test it for you here and give you the video proof of the project working.... ABOUT ME: I am a professional PCB and Circuit Designer. I designed many circuits and their PCB's. I also do programming of microcontrollers and their interfacing with different electronics components. I have experience in Pic,8051, Arduino, Atmel etc. I did many Projects using Arduino(Uno,Mega,mini etc). I am Running a Website Under the name www . microcontroller-project . com You can see my work on it. Their are lot of Projects on it using different microcontrollers. It also contains projects in which Arduino is used to control appliances. Feel Free to Contact me. THANKS

Hi, i have a good in experience in PIC 32 and PIC8 device family. I have been worked with CAN protocol, UART and I2C protocol in PIC32 device. Same as yours, i have operated DAC and also one PWM card using PIC32 controller using I2C. EDA tool will be MPLab and compiler will be XC32. Device i used for pic32 is PIC32mx795f512l. Kindly request to further tech discussion about your work.

i have working knowledge in PIC micro controller for the past 2 years. done so many projects likes iot device, home security , traffic assistance etc using PIC micro controller based . you can contact me on any time, just find my email address from my profile