Esp32 arduino menuconfig jobs

I need an expert in Arduino programming to develop a code that connects to an OV7670 camera, recognizes specific patterns (like a person's head) and triggers an LED. Key Requirements: - Use an Arduino Uno or Nano to interface with an OV7670 camera and LED. - The code should have a pattern recognition feature - specifically, recognizing a person's head. - When the pattern is detected, the LED should light up to indicate an event has occurred. Additional Details: - The code should be able to differentiate a specific pattern (a person's head) from other objects or patterns that may be in the camera's view. - This is an intermediate level project, hence the recognition should be accurate enough to detect the specific object. Ideal Skills: - Proficiency in ...

...for me will be an unpaid logic test. In other words, I would not pay you any money whatsoever if you were to pass the first logic test. However, I would pay you $25 (Twenty-Five Dollars) if you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror ...

I'm looking for an ESP32 expert to help me with a project that involves utilizing both inputs/outputs and write a code in C language The project requires 7 inputs and 6 outputs. - Inputs : Time Temp sensor probe Soil moisture sensor VPD sensor PH sensor EC sensor Water level sensor - Output : 2 x Peristaltic pumps 2 x 12v pumps AC Fan (PWM-controlled EC-motor) 220v water motor pump (using Solid State Relay) inputs/outputs will need to be set up and configured and based on the reading of the input sensors the Microcontroller will control the outputs. The successful freelancer will need to provide the followi...

Advise as to whether vs code or arduino ide would be more suitable Complete a project containing the various pages of code, organised and zipped, ready for unpacking and modification/use. //* comment heavily, briefly explaining the features as you go. Use caps lock for anything that requires editor attention or input. Intended for hardware devices: • Xiao Esp32-S3 Sense (I call 'sense') • a small bulb such as this: • ESP32-4848S040C_I_Y_3 (I call '484') • a small speaker, such as this: Each sense should be assigned the placeholder for 2 micro servos. So if a new sense is selected via the 484 at any time, it is assigned a light as well as 2 servos. No functionality is currently required of the servos but the coding shoul...

I'm seeking a seasoned freelancer with substantial experience in ESP32 programming and Nextion Display configuration. Your primary task will be to develop a comforting touchscreen control system that's attention-grabbing and user-friendly. This project requires: - Design and implementation of a multi-level menu structure. The idea is simple: we want users to navigate easily through various menu options without experiencing any difficulties. - Wireless connectivity isn't required. Key Skills: - Exceptional understanding of ESP32 programming. - Proven expertise with Nextion Display setup. -SD Card Read. -PID Control Please ensure your proposal demonstrates your experience with these specific requirements. Looking forward to your applications!

I need help to build a library for the tmp1827 (Texas Instruments) onewire sensor in arduino. It should run also with an ESP32. The Library should have at least following methods: Read temperature Read unique ID Write EPROM Read EPROM

I am in need of a professional who can efficiently handle an RS485 device that requires reconfiguration. The scope of...converter - Installation and configuration of the converter with the RS485 device - Ensuring smooth and effective communication between the RS485 device and the TCP/IP Ethernet serial server Preferred skills and experience: - Proficient in working with RS485 devices - Strong knowledge of TCP/IP Ethernet serial servers and hardware programming - Prior experience with Modbus TCP - Familiarity with Arduino, Raspberry Pi, and ESP8266 Your responsibility will strictly be focused on setup and reconfiguration; no modifications on the RS485 device will be necessary. Please only bid if you are confident with this job, have relevant experience, and can deliver the projec...

I'm on the hunt for an experienced developer who can construct a BLE transport layer on an ESP32. Ideally, you should have proficiency in C to execute this project. Required Functionalities: - Reading from a BLE device - Writing to a BLE device - Connecting and disconnecting to a BLE device The TP should be able to handle 5K bytes in one go. The project entails observing conformity with the following Bluetooth protocols and standards: - Bluetooth 4.0 - Bluetooth 4.2 - Bluetooth 5.0 If you are confident with your skills and have experience with BLE protocols and ESP32, please bid on this project. Your expertise will be greatly appreciated!

...background in measurement systems particularly using load cells and load cell amps and basic platform development. The objective is to develop a project which measures loads within a range of 10-20kg , with data input to an Arduino microcontroller. The ability to configure an edge device to continuously stream data to a simple BI dashboard on a desktop is also required. The successful freelancer should have the following skills and experience: - An excellent understanding of load cells and how to operate and interpret readings from them. - Extensive experience using Arduino microcontrollers and able to proficiently program and troubleshoot them. - Knowledge on how to integrate an edge device with this setup, and the skills needed to stream data to a BI dashboard. -Should...

Hi there, I'm looking for an expert in Arduino programming who can develop custom code. I have all the hardware including an Arduino Uno R4, a NEMA 17 stepper motor, an A4988 stepper motor controller, an RC522 RFID antenna, a 1602IIC LCD display, and push buttons. All of these components need to be connected to the same arduino. I need this system function as follows: - When the push button is pressed, the stepper motor will be moved X amount of steps in one direction after a delay of 1 second. At this time, the LCD display should display "Scan ID to Unlock". - When a registered and accepted RFID tag is scanned, the LCD will display "Tool Unlocked". When this happens, the stepper motor should be moved X amount of steps BACK to where it cam...

Feel free to ask any questions for clarity. Need assistance to connect my ESP32-2432 microcontroller to my Windows system. With an intermediate level experience, I need guidance and walkthrough for the overall process. The final goal is to create software able to: - Load PDF files stored locally on the microcontroller - View these PDFs - Provide annotation capabilities to these PDFs The ideal freelancer: - Is proficient with ESP32-2432 microcontrollers - Has extensive knowledge in software development for embedded systems, particularly with PDF viewer development - Strong understanding of memory management on these devices - Excellence in explaining technical details and instructions in a simple, clear fashion.

I'm in need of an ESP32 BLE application that can be controlled remotely. The platform for the user interaction will be Arduino ESP32. Key Requirements: - Client/Server Architecture: This application should have a client/server structure. - Bidirectional Communication: The application should support both reading and writing data. - Multiple Device Control: The application should be capable of controlling between 1-5 different devices. The ideal freelancer for this project should have: - Strong experience with ESP32 and Bluetooth Low Energy. - Proficiency in developing applications for Arduino ESP32. - Proven track record of building client/server applications. - Excellent communication skills to understand the specific requirements of this p...

I'm looking for a proficient developer to add features to an IoT website. The website receives data from IoT device and provides users visualization of their data. Looking to add features to user access control and push data to IoT device. Freelancer must have ESP32-S3

I'm in need of a skilled Arduino coder to create a custom code for me. My project primarily involves generating variable frequency range FSK sine wave output. Key Requirements: - Develop code specifically for Arduino R4 board + SD card module - Generate sine waves of different frequencies - Different frequencies - 10,000 different frequencies (integers) - eg: txt file (100,200,300,400,500.................n integers) Frequencies list are stored in a SD card CSV or txt format Arduino new R4 boards has built-in DAC for sine wave generation with ready made library as follows: Code for wave generation --->>> analogWave wave(DAC); int freq = 10; // in hertz, change accordingly void setup()...

I'm looking for a skilled an...who can assist me in building an intermediate-level electronic prototype. The main objective of this project is to create a functional prototype, which will involve a moderate level of programming. No custom PCB design is necessary for this project. Ideal skills and experience for this job include: - Proficiency in electronic engineering with a focus on prototyping - Strong understanding of Arduino programming - Experience in building electronic prototypes with multiple components - Ability to work on intermediate level projects that require moderate programming - Good problem-solving skills and attention to detail If you think you have the right skills and experience for this project, please submit your proposal with relevant examples of your...

I'm seeking an expert in LabView, Arduino programming, and their integration. The aim of the project is to create a system for industrial automation and prototyping that includes: - Real-time data monitoring - Designing a user-friendly interface - Automation and integration of microcontrollers You should ideally hold substantial experience in LabView development and Arduino programming. Your experience should encompass integrating these platforms and implementing the features mentioned above. Knowledge in integrating various sensors into this type of system and achieving real-time data monitoring will be crucial to this project. Any previous work with industrial automation and prototyping will certainly be beneficial.

...comprehensive learning plan intended for various age groups from Kindergarten to college. This curriculum should encompass three main areas: 1. Coding: Should cover various programming languages including Python, Java and foundational learning platforms like Scratch, as well as MIT App Inventor for app development. 2. Robotics: The curriculum should also touch on different robotics platforms - from Arduino, LEGO, VEX, Sphero to Raspberry Pi. 3. Media Arts: In addition, I want to integrate media arts, where students can learn graphic design, animation, videography, and web design and development. Ideal candidates should have extensive experience in pedagogy and skill development in these areas, and be able to create an engaging, age-appropriate curriculum for students acros...

... an esp32 sending sensor and pin status data) and store the received data in a local CSV file on the phone. Key Feature Requirements: - The app should function smoothly on both Android and iPhone platforms. (priority is android for now) - Ability to connect over Bluetooth with an esp32 wroom module. The Bluetooth protocol may be either BLE or classic, as I am not entirely certain which one this module uses. - Once connected, the app should be capable of receiving sensor and pin status data. - The app should store this received data in a local CSV file on the mobile device for later access. - A simple and functional user interface would fit best for this application. I do not need aesthetic elements or interactive features. - the data will be sent at intervals determined...

I have an existing Arduino code which requires modification for converting my Bluetooth to BLE compatible for iOS applications. Your responsibility will be to: - Modify the existing Arduino code to make it BLE compatible - AS optional Create an iOS application with a control interface feature. The application should allow users to control and manage a customized smart lock model. Ideal Skills: - Expertise in Arduino code modification - Proven experience in developing BLE compatible software - Proficient in iOS application development, particularly in creating control interfaces - Familiarity with smart lock functionalities would be a bonus. Your services will be reviewed for potential system upgrading needs, hence, I'm interested in individuals who have a pr...

I am looking for an Arduino project that will have a range of features and capabilities to help me create Internet of Things (IoT) solutions. Specifically, I am looking for functionalities that include temperature and humidity monitoring, water level indicator, dc5v humidifier portable bluetooth speaker,soil moisture monitoring, multicolour led and remote control capabilities. In addition, I also need features such as a water level indicator, soil moisture indicator, fogger, and bluetooth operated. I need the remote control capabilities to have a range of 10-50 meters. Finally, I need the project to be able to control small sensors.

I am looking for a skilled Arduino developer to code my Arduino Mega for sensor monitoring. The project requires the code to interact with specific hardware and components. The sensor monitoring required is at an intermediate level, involving multiple sensors and data processing. My project consist of a collision sensor, Bluetooth module, ultrasonic sensor, an OLED screen and a buzzer, all connected to the Arduino mega board. The data from these sensors will be sent to the application through the Bluetooth module and the data like date, time, navigation directions and the call notification from the app will be sent to the Arduino for displaying the same on the OLED screen. Whenever there is a collision of the helmet occurs a collision signal will be sent to the ...

I need a C++ programmer who can answer questions about my project Key Project Requirements: - Have prior experience in C++ programming for Arduino UNO - Familiarity with PixyMon camera - Proficiency in implementing line following functionality The project is urgent, and I need someone who can deliver a high-quality code within a short time frame. If you meet the above requirements, and you're confident in your ability to deliver quickly, please reach out.

I am seeking an Arduino programmer to help with a specific project. Key Responsibilities: - Writing code for controlling reed switches - Displaying data from the reed switches on an LCD Ideal Candidate: - Proficient in Arduino programming and sensor control - Experience in working with reed switches - Capable of interfacing with LCD displays This project requires a good understanding of sensor control, as well as being able to implement the desired display output. Understanding of the specific sensor, reed switches, is a plus. Please only bid if you have experience in these areas.

Thanks for considering my job. Let me simplify it for you: I need to write a code and design a circuit board for a two-part invention. The first part is a transmitter, and the second is a receiver. The receiver's task is to send an RF signal to a separate device when triggered by the transmitter, which happens when they are within 3 to 5 feet of each other. This signal isn't for anything we're creating; it's for another device altogether. Hope that's clear! Let me know if you need more info.

I'm looking for someone skilled in Arduino and SNMP integration who can create a sketch for my IOT project. Key requirements: - Utilize temperature and humidity sensors - Report sensor readings and their status via SNMP, specifically tracking temperature, humidity, and particulate matter (PM 1.0, 2.5, etc) -Utilize the eInk device for device status Ideal candidates should have good understanding and hands-on experience with environmental sensors, Arduino programming, SNMP protocols and Zabbix software. Hardware is the M5 AirQ device () I have attached the original config file that presents all sensor data via a web interface and should provide all the details required.

...smart power monitor system I've developed using Arduino. This report will be accompanied by a PowerPoint presentation. The report should contain: - **Technical Details:** I have a basic structure in place, but I'm seeking a professional who can fill in any missing technical information. - **Benefits and Applications:** The report should showcase the potential benefits of this system and highlight possible real-world applications. - **Data Analysis and Insights:** It's important to have a detailed data analysis section, with insights drawn from the information collected by the system. I also need the report to include missing details such as: - **Hardware Components Used:** I'd like the freelancer to list all the hardware components like the Arduino U...

I am looking for a skilled Arduino developer to code my Arduino Mega for sensor monitoring. The project requires the code to interact with specific hardware and components. The sensor monitoring required is at an intermediate level, involving multiple sensors and data processing. My project consist of a collision sensor, Bluetooth module, ultrasonic sensor, an OLED screen and a buzzer, all connected to the Arduino mega board. The data from these sensors will be sent to the application through the Bluetooth module and the data like date, time, navigation directions and the call notification from the app will be sent to the Arduino for displaying the same on the OLED screen. Whenever there is a collision of the helmet occurs a collision signal will be sent to the ...

I'm looking for a skilled Arduino programmer who can help me set up an interface between my Arduino and Lora SX1278. This project involves two primary components: setting up the Lora SX1278 interface and controlling a relay on the receiver side. Key Requirements: - Lora SX1278 Interface Configuration: I need to establish a reliable, long-distance communication channel between two Arduinos. The Lora SX1278 module should be set up for low power consumption and secure data transmission. I would like the system to be able to send and receive data effectively. - Relay Control: On the receiver side, the Arduino should be able to turn on and off a relay. This should be accomplished using the Lora SX1278 module. The relay control can be either manual (via a button), remo...

I require an expert in Arduino Esp32 to develop the following functionalities: - Implement wireless communication capabilities on the Arduino system. - Integrate both analog sensor input and digital output control on the same Esp32. - Subsequently, the system must be designed to read and store 4 diverse coin denominations. Storage and Processing of Data: - Experience working with Arduino internal non-volatile memory is crucial, as this is the preferred method of storing denomination data. Key Skills: - Arduino ESP32 proficiency - Understanding of wireless communication - Expertise in internal non-volatile memory systems - Ability in sensor input and digital output control - Experience in handling multiple currency denominations This is ...

...up data communication between Arduino devices using Lora technology. Key Project Details: - The project involves simple packet sending between devices, specifically focusing on transmitting GPS coordinates. - You need to be proficient in Lora programming for this project. Previous experience in similar projects is highly desirable. - The sensors that need to be integrated with the Arduino for remote sensing and monitoring include temperature and humidity sensors, soil moisture sensors, as well as motion detectors. Ideal Skills and Experience: - Strong Arduino programming skills. - Proficiency in Lora technology. - Experience with integrating various sensors. - Experience with GPS location data handling. - 1 device is lilygo t-beam v1.2 and the other is Arduino...

I'm aiming at developing a robot that employs basic movement controls, thereby necessitating a detailed circuit diagram backed by Arduino code. Essential aspects to consider encompass: - The robot's main purpose: Robotics - Level of complexity: Basic movement controls - Sensors involved: Pir sensor, Tilt sensor Ideally, I am searching for a freelancer who possesses have an extensive background in robotics, especially with movement controls, and a strong understanding of Arduino. Proficiency in working with Pir and Tilt sensors would be a crucial addition as well. Knowing your way around servo, stepper, and DC motor styles would be helpful, even though this particular project might not necessarily utilize them.

Description: We are looking for an experienced electronics engineer to develop a PCB design for a small project using the ESP32 microcontroller. This project involves controlling both Line In and Line Out audio through an amplifier. The schematic for this setup will be provided to you. Project Details: Microcontroller: ESP32 Functionality: Control Line In and Line Out audio via an amplifier Additional Component: Integration of an MP3 module, which is to be triggered by AT commands and also through Serial communication. Deliverables: Complete PCB design files ready for manufacturing, including Gerber files, BOM, and assembly drawings. Requirements: Proven experience in PCB design and electronic circuit design. Proficient in using PCB design software (please specify which s...

I'm in the final stages of a project involving Esp32 and ebyte LoRa modules. My main issue is the unreliability of the network connection and the slow data transmission speed. I need an experienced professional who can help me optimize these aspects to get the project completed. Key requirements: - Strong experience with programming and coding for Esp32 and ebyte LoRa modules - Previous experience in troubleshooting connectivity issues and optimizing data transmission Please reach out if you have demonstrable experience in this area. Must be available to work on project immediately and have it completed within a few days.

Please Sign Up or Login to see details.

I'm looking for a skilled Arduino/PCB designer for my course project which has following features: - Switching ON/OFF power light: I'd like to control this using screentouch. - Temperature measurement: I'd like the device to measure the temperature in a room and display it as a numerical reading on a screen. All the above features should have battery power, just like a smartwatch. The ideal candidate should have experience in Arduino and PCB design, as well as a good understanding of power management and temperature sensing. If you're confident in your abilities and believe you can bring this project to life, please reach out.

I'm in need of an experienced Arduino programmer to make simple amendments to existing functions in my code. This project involves code which interacts with external devices - understanding of these interactions will be crucial. Requirements for this task: - Expertise in Arduino programming and language - Experience with code that interfaces with external devices - Strong attention to detail as subtle changes are required - Ability to ensure system functionality post modification I look forward to your comprehensive responses. Ability to deliver promptly and accurately will be considered for ongoing work.

...significant advantage. Deliverables include the final working PCB prototype model. Reliability, accuracy, and attention to detail are crucial for this project. - BOM File has to be provided - CPL & Gerber files has to be provided - NEEDS to be cost-effective for mass production - Any mining algorithm should/could be programmable - Considerable high hashrate is expected - Raspberry Pi 3/4/5, ESP32xxx, Arduino or any other microcontroller can be used The main focus of this project is: - Low cost hardware ( PCB ) - Electrical Efficiency - Mining capabilities - Scalability - Considerable hashing rates expected This project has a budget of 500-750 USD for a running & tested prototype and has to be done ASAP. You have totally freedom of the components you want to use, but r...

...temperature and humidity and displays the values on an LCD screen. The system is based on one or more Arduino boards and addiƟonal components. Design the structure of the system, select components and sketch the structure of the system soŌware. (Based on Arduino Project Handbook by Mark Geddes, 2016) Note: Not all details are specified in the descripƟon. For instance, we don’t know where exactly the system will work, how it will be powered (baƩery or grid), and how oŌen measurements will be taken. Resolving these issues is leŌ to you as the designer of the system. However, remember that each design decision requires a jusƟficaƟon. 3. General idea of the soluƟon: For such a simple system, one Arduino Uno board will be sufficient. To measure both humidity and te...

...an almost completed power electronics system for bidirectional power exchange of up to 8 kVA across all four quadrants. The system utilizes the IM828-XCC platform, with control achieved via galvanic isolation through the Arduino DUE. Your main tasks involve adding the ADuM1401 Digital Isolator for Arduino connection, connecting the motor and generator functionalities, integrating the iMOTION2go chipset, and creating the PCB design using KiCad. Project Tasks: ADuM1401 Digital Isolator Integration: Add the ADuM1401 Digital Isolator to ensure galvanic isolation for the Arduino DUE connection. Implement necessary connections and ensure compatibility with existing components. Motor and Generator Connection: Ensure seamless functionality of both motor and generator mode...

I need a skilled microcontroller programmer with experience in working with the ESP32 specifically. The main aim of this project is to control and navigate drones using the ESP32. The ideal freelancer for this project should have: - Proficiency in ESP32 programming - Experience with drone control and navigation - Knowledge of wireless communication protocols - A solid understanding of microcontroller systems - Previous experience with similar projects would be a plus The project will entail: - Developing a reliable system to control and navigate drones using the ESP32 - Ensuring the system is responsive, stable, and capable of managing a drone's movements effectively This project requires attention to detail and a high level of technical expertise. Pleas...

I need a talented developer to assist in integrating a motor with an ESP32 microcontroller. Here are the project specifics: - Actuator: Tinymovr Axion A1 - Communication Protocol: The ESP32 should communicate with the CAN bus using the CAN @ 1mbps - Toolset: I require the project to be developed using the Arduino using Arduino tinymovr library. The ideal candidate for this project will have a background in microcontroller programming, specifically with the ESP32, and demonstrable experience with motor control. Prior experience with the CAN FD protocol and the Arduino framework will be highly beneficial.

I am looking for a freelancer who is experienced in embedded code, specifically Arduino. I have a specific project in mind that requires the use of embedded code. Skills and Experience Required: - Proficiency in Arduino programming - Strong knowledge of embedded code development - Experience in working on projects involving Arduino and RS485 Modbus protocol Refer the datasheet attached if needed The purpose of the project is not specified.

I'm in need of an Arduino-based relay switch that can operate multiple circuits serially. The purpose of this project is to start lights in a serial fashion, using physical buttons. Key Requirements: - Build a reliable relay switch: The switch should be able to handle automation for up to 15 relays. - Physical Button Interface: The relay switch must be operable via physical buttons for a user-friendly experience - specially to set adjust time delay between the serial switching Ideal Skills: - Arduino Programming: Experience in programming Arduino to build relay switches. - Circuit Design: Proficiency in designing circuits for handling multiple appliances. - Remote Control Systems: Knowledge in implementing remote control systems for automated appliances. - User ...

I'm looking for a freelancer who is proficient in using the Proteus Design Suite for an intermediate-level simulation project involving an Arduino microcontroller. Key Requirements: - Proficiency with Proteus Design Suite: The ideal candidate should have prior experience in creating and executing simulations using this platform. - Intermediate-Level Microcontroller Simulation: The project involves simulating an Arduino microcontroller which requires a good grasp of microcontroller programming and circuits. - Attention to Detail: The successful freelancer will need to ensure high accuracy in the simulation results. - Timely Delivery: The project has a set timeline, which the freelancer should adhere to strictly.

For my recent short book about utilizing Arduino, I need proficient help with enhancing the aesthetics and formatting of the text. The ultimate goal is to turn my raw material into a print-ready layout while ensuring it matches my preference for a modern and clean style. Final format needs to be one that I can easily edit. Style reference: Makezine (make magazine) books or Hackspace magazine. Key tasks for this project: • Develop diverse page layouts to maintain reader engagement. • Incorporate placeholders for pictures to enrich the content visually. • Include placeholders for elements like flow diagrams and illustrations to support the text. Ideal candidate: An ideal candidate for this position will have considerable experience in book layout design, especi...

Description: I am seeking a skilled freelancer with experience in electronics, Motor Control through Pulse/Step & Direction, Arduino, and servomotors and their drivers to assist me in implementing the basic control for reliable operation. The primary focus will be on the electronics aspect of the project. The motor in question is a "T6 Series 750W AC Servo Motor" (see link: ) which is intended to be controlled using an Arduino Portenta H7. What I Require: - Development of an appropriate circuit diagram compatible with the motor driver and Arduino. - Selection of the required components. - Configuration settings including pulse widths, pulse formats, etc.

I am looking for a skilled developer to create a control app for a thermal camera. The app should be developed for the Windows platform based on supplied SDKs, but will need to communicate wirelessly via radio link, using Arduino. The premise is that we will be able to have camera control over a wireless link (end goal is to mount the camera on a drone). We need to control focus, image camera, video start/stop and some other functions. Hardware is based on Lattepanda Alpha (integrated Arduino processor). Windows 10 OS. Receiver is SBUS. More information on SDKs can be provided upon request. Due to the timeframe, we are looking for developers on same or similar timezone to UK.

I'm in need of an experienced Arduino developer to create a custom software for my industrial machine. The software should mainly focus on data logging and controlling the machine's sequences. Key Requirements: - The software must log the machine's operation data onto an SD card. This data should be easily accessible and able to be downloaded for further analysis. - The Arduino software needs to control the sequential operations of this industrial machine. This involves managing the input and output signals, and ensuring a timely and accurate execution of the machine's functions. Ideal Skills and Experience: - Proficient in developing Arduino software. Knowledge of both sensor data collection and actuator control is a plus. - Prior experience in p...

I am seeking a proficient tech freelancer with skills and experience in working with Nextion Intelligent series HMI and Arduino Nano in combination. The aim of this project is to create a calculation and display system, primarily based on timer measurements and pre-stored factors. Skills and Experience: - Strong understanding of Nextion HMI and Arduino Nano - Experience handling calculations and display systems Project Tasks: - Develop a system using Arduino Nano for accurate timing - Implement calculations based on timer measurements and stored factors - Display results on Nextion Intelligent series HMI This project does not involve processing of sensor data, business metrics. The focus is on timer measurements and stored factors to calculate, display and stor...

The project consists of the design of number 2 PCBs. The first PCB named A is a breakout board for Arduino Mega and Giga, with a maximum size of 140x120 mm. The second PCB named B is a small board and it connects to PCB A with a flat cable, the size is not defined. In the PCBs there are JST HX - 2.54 or standard pin connectors, mosfets for power outputs, two A4988 modules to control 2 stepper motors and two DRV8833 modules to control 4 DC motors, there is also a 1W LED controlled by one of mosfets. The motor modules and mosfets must be equipped with jumpers to select the 5 or 12 volt power supply. Not all mosfets need to be controlled by pwm pins. All digital inputs must include a 10k ohm resistor, but with the possibility of excluding it. There are also digital and analog inputs, ...