Arduino progammer for hire jobs
I require an intricate hardware developer with technical mastery to custom design an isolated encoder signal splitter board that's compatible with Arduino micro-controller, specifically ATmega2560. Key Features: 1. Voltage Isolation: The board must feature voltage isolation to ensure safe transmissions. 2. Compatibility: It must be fully interoperable with Arduino libraries which serves as a platform for expansion and experimentation. 3. Signal Amplification: the board should not draw more current than pull-up resistors for incremental encoders connection. If required, a signal amplification needs to be implemented. Standard signal voltage is 5V DC. Main Purpose: 1. Noise Reduction: It should provide clear communication by suppressing ambient noise in t...
Here is a brief description of my project. (Please note: I will not reply back to auto response messages. Also please post the actual price not a price just to get m...charged via USB. Part C: Part C, is a separate module that is already created its job is when it receives a specified RF signal from Part B it activates its predesigned function and then is ready for the operation to happen again. Think about this, a dog has a transmitter on his dog collar when the dog gets within two or 3 feet from a water valve that valve turns on for approximately 30 seconds and then turns off. That’s not exactly what I’m creating but it’s a good visual reference. If this is something that looks like it could be easy enough to make I may try to sell them but first looking...
As the project owner, I require an Arduino Uno code, specifically designed to interact with a fingerprint reader for input, LCD and 14 relays for output. Key Requirements: - The code should identify 14 people's fingerprints (let's say 2 different fingerprints for each person), write the name of that person on the LCD and activate the corresponding relay for each person. - The associated relays will control a particular robotic device. - When an unrecognized fingerprint is scanned, the system should write on LCD "unrecognized fingerprint" without triggering any relay. Ideal Skills and Experience: - Proficiency with Arduino programming - Experience working with fingerprint readers - Knowledge of relay and robotic systems . Fa...
I have a project that requires setting up an 8 Channel Arduino Relay Module and programming it to operate using a basic 4 button hand controller. My Arduino board of choice is the Arduino Uno. For the hand controller, I need different functionalities: - Each button should be able to toggle a specific relay on and off. - Certain buttons should cycle through a sequence of relays. - Some buttons should have the ability to control a combination of relays. Importantly, only 1 relay should be controlled at a time. The ideal freelancer for this project should have a deep understanding of Arduino programming, particularly with Arduino Uno, and experience with relay modules and controller setup. Familiarity with creating flexible, customizable c...
I am seeking a professional video producer to create a concise, engaging orientation video for new employees. The video should be under 3 minutes in length and will be focused on introducing our company culture, as well as providing necessary information regarding company supplies and instructions for timesheet and payroll. - I have a sample of an old video that can be used as a guide Key Responsibilities: - Produce a high-quality, under 3 minutes video oriented for new hires - Clearly introduce our company - Provide detailed instructions for company supplies, timesheet, and payroll Ideal Skills and Experience: - Previous experience in producing orientation or training videos - Strong understanding of company culture and effective communication - Video edit...
...individual to create an innovative IoT solution utilizing an Arduino board and camera module, along with UPC scanning software. This project involves developing a UPC scanner that can accurately read the UPC on a product. Upon scanning, the information of the scanned product such as date, time, UPC, product name and product retail should be transmitted and populated into a web application. Key Tasks: - Develop and integrate the UPC scanning software to be used with the camera attachment for the Arduino board. - Establish a Wi-Fi connection for the Arduino IoT UPC scanner to communicate with the web app. - Ensure accurate transmission and population of the scanned product information in the web application. Ideal Skills: - Proficient in Arduino...
I need an expert in Arduino programming to develop a code that connects to an OV7670 camera, recognizes specific patterns (like a person's head) and triggers an LED. Key Requirements: - Use an Arduino Uno or Nano to interface with an OV7670 camera and LED. - The code should have a pattern recognition feature - specifically, recognizing a person's head. - When the pattern is detected, the LED should light up to indicate an event has occurred. Additional Details: - The code should be able to differentiate a specific pattern (a person's head) from other objects or patterns that may be in the camera's view. - This is an intermediate level project, hence the recognition should be accurate enough to detect the specific object. Ideal Skills: - Proficiency in ...
Advise as to whether vs code or arduino ide would be more suitable Complete a project containing the various pages of code, organised and zipped, ready for unpacking and modification/use. //* comment heavily, briefly explaining the features as you go. Use caps lock for anything that requires editor attention or input. Intended for hardware devices: • Xiao Esp32-S3 Sense (I call 'sense') • a small bulb such as this: • ESP32-4848S040C_I_Y_3 (I call '484') • a small speaker, such as this: Each sense should be assigned the placeholder for 2 micro servos. So if a new sense is selected via the 484 at any time, it is assigned a light as well as 2 servos. No functionality is currently required of the servos but th...
I need help to build a library for the tmp1827 (Texas Instruments) onewire sensor in arduino. It should run also with an ESP32. The Library should have at least following methods: Read temperature Read unique ID Write EPROM Read EPROM
I am in need of a professional who can efficiently handle an RS485 device that requires reconfiguration. The scope of...converter - Installation and configuration of the converter with the RS485 device - Ensuring smooth and effective communication between the RS485 device and the TCP/IP Ethernet serial server Preferred skills and experience: - Proficient in working with RS485 devices - Strong knowledge of TCP/IP Ethernet serial servers and hardware programming - Prior experience with Modbus TCP - Familiarity with Arduino, Raspberry Pi, and ESP8266 Your responsibility will strictly be focused on setup and reconfiguration; no modifications on the RS485 device will be necessary. Please only bid if you are confident with this job, have relevant experience, and can deliver the projec...
...background in measurement systems particularly using load cells and load cell amps and basic platform development. The objective is to develop a project which measures loads within a range of 10-20kg , with data input to an Arduino microcontroller. The ability to configure an edge device to continuously stream data to a simple BI dashboard on a desktop is also required. The successful freelancer should have the following skills and experience: - An excellent understanding of load cells and how to operate and interpret readings from them. - Extensive experience using Arduino microcontrollers and able to proficiently program and troubleshoot them. - Knowledge on how to integrate an edge device with this setup, and the skills needed to stream data to a BI dashboard. -Should...
Hi HIRE SEO EXPERTS, I noticed your profile and would like to offer you my project. We can discuss any details over chat.
Hi there, I'm looking for an expert in Arduino programming who can develop custom code. I have all the hardware including an Arduino Uno R4, a NEMA 17 stepper motor, an A4988 stepper motor controller, an RC522 RFID antenna, a 1602IIC LCD display, and push buttons. All of these components need to be connected to the same arduino. I need this system function as follows: - When the push button is pressed, the stepper motor will be moved X amount of steps in one direction after a delay of 1 second. At this time, the LCD display should display "Scan ID to Unlock". - When a registered and accepted RFID tag is scanned, the LCD will display "Tool Unlocked". When this happens, the stepper motor should be moved X amount of steps BACK to where...
I'm in need of an ESP32 BLE application that can be controlled remotely. The platform for the user interaction will be Arduino ESP32. Key Requirements: - Client/Server Architecture: This application should have a client/server structure. - Bidirectional Communication: The application should support both reading and writing data. - Multiple Device Control: The application should be capable of controlling between 1-5 different devices. The ideal freelancer for this project should have: - Strong experience with ESP32 and Bluetooth Low Energy. - Proficiency in developing applications for Arduino ESP32. - Proven track record of building client/server applications. - Excellent communication skills to understand the specific requirements of this project.
I'm in need of a skilled Arduino coder to create a custom code for me. My project primarily involves generating variable frequency range FSK sine wave output. Key Requirements: - Develop code specifically for Arduino R4 board + SD card module - Generate sine waves of different frequencies - Different frequencies - 10,000 different frequencies (integers) - eg: txt file (100,200,300,400,500.................n integers) Frequencies list are stored in a SD card CSV or txt format Arduino new R4 boards has built-in DAC for sine wave generation with ready made library as follows: Code for wave generation --->>> analogWave wave(DAC); int freq = 10; // in hertz, change accordingly ...
I'm looking for a skilled and experienced electronic engineer who can assist me in building an intermediate-level electronic prototype. The main objective of this project is to create a functional prototype, which will involve a moderate level of programming. No custom PCB design is necessary for this project. Ideal skills and experience for this job include: - Proficiency in electronic engineering with a focus on prototyping - Strong understanding of Arduino programming - Experience in building electronic prototypes with multiple components - Ability to work on intermediate level projects that require moderate programming - Good problem-solving skills and attention to detail If you think you have the right skills and experience for this project,...
I'm seeking an expert in LabView, Arduino programming, and their integration. The aim of the project is to create a system for industrial automation and prototyping that includes: - Real-time data monitoring - Designing a user-friendly interface - Automation and integration of microcontrollers You should ideally hold substantial experience in LabView development and Arduino programming. Your experience should encompass integrating these platforms and implementing the features mentioned above. Knowledge in integrating various sensors into this type of system and achieving real-time data monitoring will be crucial to this project. Any previous work with industrial automation and prototyping will certainly be beneficial.
I am looking for experienced curriculum developers to create a comprehensive learning plan intended for various age groups from Kindergarten to college. This curriculum should encompass three main areas: 1. Coding: Should cover various programming languages including Python, Java and foundational learning platforms like Scratch, as well as MIT App Inventor for app development. 2. Robotics: The curriculum should also touch on different robotics platforms - from Arduino, LEGO, VEX, Sphero to Raspberry Pi. 3. Media Arts: In addition, I want to integrate media arts, where students can learn graphic design, animation, videography, and web design and development. Ideal candidates should have extensive experience in pedagogy and skill development in these areas,...
As a part of our team, you will be responsible for creating designs that are not only visually appealing but also have a strong impact on our target audience. Key Responsibilities: - Logo Design: We're looking for an abstract style for our brand. Your design should be unique, memorable, and versatile across different platforms. - Marketing Materials Design: You will be responsible for creating a variety of marketing materials, such as brochures, flyers, and social media content. Your designs should be eye-catching, on-brand, and convey our message effectively. - Website Design: You will play a crucial role in the design of our website. Your designs should be user-friendly, attractive, and in line with our brand identity. Your portfolio will be an impor...
I have an existing Arduino code which requires modification for converting my Bluetooth to BLE compatible for iOS applications. Your responsibility will be to: - Modify the existing Arduino code to make it BLE compatible - AS optional Create an iOS application with a control interface feature. The application should allow users to control and manage a customized smart lock model. Ideal Skills: - Expertise in Arduino code modification - Proven experience in developing BLE compatible software - Proficient in iOS application development, particularly in creating control interfaces - Familiarity with smart lock functionalities would be a bonus. Your services will be reviewed for potential system upgrading needs, hence, I'm interested in indi...
I am looking for an Arduino project that will have a range of features and capabilities to help me create Internet of Things (IoT) solutions. Specifically, I am looking for functionalities that include temperature and humidity monitoring, water level indicator, dc5v humidifier portable bluetooth speaker,soil moisture monitoring, multicolour led and remote control capabilities. In addition, I also need features such as a water level indicator, soil moisture indicator, fogger, and bluetooth operated. I need the remote control capabilities to have a range of 10-50 meters. Finally, I need the project to be able to control small sensors.
I am looking for a skilled Arduino developer to code my Arduino Mega for sensor monitoring. The project requires the code to interact with specific hardware and components. The sensor monitoring required is at an intermediate level, involving multiple sensors and data processing. My project consist of a collision sensor, Bluetooth module, ultrasonic sensor, an OLED screen and a buzzer, all connected to the Arduino mega board. The data from these sensors will be sent to the application through the Bluetooth module and the data like date, time, navigation directions and the call notification from the app will be sent to the Arduino for displaying the same on the OLED screen. Whenever there is a collision of the helmet occurs a collision signal...
I need a C++ programmer who can answer questions about my project Key Project Requirements: - Have prior experience in C++ programming for Arduino UNO - Familiarity with PixyMon camera - Proficiency in implementing line following functionality The project is urgent, and I need someone who can deliver a high-quality code within a short time frame. If you meet the above requirements, and you're confident in your ability to deliver quickly, please reach out.
I am seeking an Arduino programmer to help with a specific project. Key Responsibilities: - Writing code for controlling reed switches - Displaying data from the reed switches on an LCD Ideal Candidate: - Proficient in Arduino programming and sensor control - Experience in working with reed switches - Capable of interfacing with LCD displays This project requires a good understanding of sensor control, as well as being able to implement the desired display output. Understanding of the specific sensor, reed switches, is a plus. Please only bid if you have experience in these areas.
Here is a brief description of my project. My project consists of two items. Part A: Part A has a single function that function is to transmit a signal. The part n...charged via USB. Part C: Part C, is a separate module that is already created its job is when it receives a specified RF signal from Part B it activates its predesigned function and then is ready for the operation to happen again. Think about this, a dog has a transmitter on his dog collar when the dog gets within two or 3 feet from a water valve that valve turns on for approximately 30 seconds and then turns off. That’s not exactly what I’m creating but it’s a good visual reference. If this is something that looks like it could be easy enough to make I may try to sell them but first looking ...
I'm looking for someone skilled in Arduino and SNMP integration who can create a sketch for my IOT project. Key requirements: - Utilize temperature and humidity sensors - Report sensor readings and their status via SNMP, specifically tracking temperature, humidity, and particulate matter (PM 1.0, 2.5, etc) -Utilize the eInk device for device status Ideal candidates should have good understanding and hands-on experience with environmental sensors, Arduino programming, SNMP protocols and Zabbix software. Hardware is the M5 AirQ device () I have attached the original config file that presents all sensor data via a web interface and should provide all the details required.
...smart power monitor system I've developed using Arduino. This report will be accompanied by a PowerPoint presentation. The report should contain: - **Technical Details:** I have a basic structure in place, but I'm seeking a professional who can fill in any missing technical information. - **Benefits and Applications:** The report should showcase the potential benefits of this system and highlight possible real-world applications. - **Data Analysis and Insights:** It's important to have a detailed data analysis section, with insights drawn from the information collected by the system. I also need the report to include missing details such as: - **Hardware Components Used:** I'd like the freelancer to list all the hardware components like the Arduino U...
I am looking to hire a graphics designer for this social media page, It is share market successfull expert analyst page. Design attractive eye catching design for the user Twitter page design Youtube page design, sharemarket Template design Budget:: Rs.250 Dont expect more cost, Good review is an asset
I am looking for a skilled Arduino developer to code my Arduino Mega for sensor monitoring. The project requires the code to interact with specific hardware and components. The sensor monitoring required is at an intermediate level, involving multiple sensors and data processing. My project consist of a collision sensor, Bluetooth module, ultrasonic sensor, an OLED screen and a buzzer, all connected to the Arduino mega board. The data from these sensors will be sent to the application through the Bluetooth module and the data like date, time, navigation directions and the call notification from the app will be sent to the Arduino for displaying the same on the OLED screen. Whenever there is a collision of the helmet occurs a collision signal...
PHP and MySQL web development;Error correction of HTML, CSS, PHP, MySQL, Linux Server (Almalinux, CentOS, and Ubuntu);Support for WordPress modules, themes, and implementations;Support for cPanel, Plesk, CWP, and OVIpanel;Support for working directly on Linux server;Important:All communication will be on the Freelancer.com chat;In the event that you do not provide enough details with the order, the service will be delivered only with the details received within the set time;I will fix any delayed work only during our agreed-upon timeframe for commitments made before payment. Any requirement during the work will require payment for additional time.
I'm looking for a skilled Arduino programmer who can help me set up an interface between my Arduino and Lora SX1278. This project involves two primary components: setting up the Lora SX1278 interface and controlling a relay on the receiver side. Key Requirements: - Lora SX1278 Interface Configuration: I need to establish a reliable, long-distance communication channel between two Arduinos. The Lora SX1278 module should be set up for low power consumption and secure data transmission. I would like the system to be able to send and receive data effectively. - Relay Control: On the receiver side, the Arduino should be able to turn on and off a relay. This should be accomplished using the Lora SX1278 module. The relay control can be either manual (via a...
I require an expert in Arduino Esp32 to develop the following functionalities: - Implement wireless communication capabilities on the Arduino system. - Integrate both analog sensor input and digital output control on the same Esp32. - Subsequently, the system must be designed to read and store 4 diverse coin denominations. Storage and Processing of Data: - Experience working with Arduino internal non-volatile memory is crucial, as this is the preferred method of storing denomination data. Key Skills: - Arduino ESP32 proficiency - Understanding of wireless communication - Expertise in internal non-volatile memory systems - Ability in sensor input and digital output control - Experience in handling multiple currency denominations This is quite a specialized p...
...up data communication between Arduino devices using Lora technology. Key Project Details: - The project involves simple packet sending between devices, specifically focusing on transmitting GPS coordinates. - You need to be proficient in Lora programming for this project. Previous experience in similar projects is highly desirable. - The sensors that need to be integrated with the Arduino for remote sensing and monitoring include temperature and humidity sensors, soil moisture sensors, as well as motion detectors. Ideal Skills and Experience: - Strong Arduino programming skills. - Proficiency in Lora technology. - Experience with integrating various sensors. - Experience with GPS location data handling. - 1 device is lilygo t-beam v1.2 and the other...
I am looking to hire a graphics designer for this social media page, It is share market successfull expert analyst page. Design attractive eye catching design for the user Twitter page design Youtube page design, sharemarket Template design Budget:: Rs.250 Dont expect more cost, Good review is an asset
I'm aiming at developing a robot that employs basic movement controls, thereby necessitating a detailed circuit diagram backed by Arduino code. Essential aspects to consider encompass: - The robot's main purpose: Robotics - Level of complexity: Basic movement controls - Sensors involved: Pir sensor, Tilt sensor Ideally, I am searching for a freelancer who possesses have an extensive background in robotics, especially with movement controls, and a strong understanding of Arduino. Proficiency in working with Pir and Tilt sensors would be a crucial addition as well. Knowing your way around servo, stepper, and DC motor styles would be helpful, even though this particular project might not necessarily utilize them.
I'm looking for a skilled Arduino/PCB designer for my course project which has following features: - Switching ON/OFF power light: I'd like to control this using screentouch. - Temperature measurement: I'd like the device to measure the temperature in a room and display it as a numerical reading on a screen. All the above features should have battery power, just like a smartwatch. The ideal candidate should have experience in Arduino and PCB design, as well as a good understanding of power management and temperature sensing. If you're confident in your abilities and believe you can bring this project to life, please reach out.
I'm in need of an experienced Arduino programmer to make simple amendments to existing functions in my code. This project involves code which interacts with external devices - understanding of these interactions will be crucial. Requirements for this task: - Expertise in Arduino programming and language - Experience with code that interfaces with external devices - Strong attention to detail as subtle changes are required - Ability to ensure system functionality post modification I look forward to your comprehensive responses. Ability to deliver promptly and accurately will be considered for ongoing work.
...Engineer to design a PCB prototype for cryptocurrency mining. An efficient board that carries 1 to 16 chips (ASIC, FPGA, and/or Microcontrollers) is expected, with the ability to handle 5V (200W) Max. Strong expertise in Electrical Engineering and experience in designing a 4 layer PCB board is preferable; those with a background in cryptocurrency technology hold a significant advantage. Deliverables include the final working PCB prototype model. Reliability, accuracy, and attention to detail are crucial for this project. - BOM File has to be provided - CPL & Gerber files has to be provided - NEEDS to be cost-effective for mass production - Any mining algorithm should/could be programmable - Considerable high hashrate is expected - Raspberry Pi 3/4/5, ESP32xxx, ...
need to hire experienced company for On-going SEO for my company web More details: What is the current ranking of your website on search engine results? Third page or beyond Which search engines are you focusing on improving your rankings? Google What primary goal do you want to achieve with SEO? Increase website traffic
...temperature and humidity and displays the values on an LCD screen. The system is based on one or more Arduino boards and addiƟonal components. Design the structure of the system, select components and sketch the structure of the system soŌware. (Based on Arduino Project Handbook by Mark Geddes, 2016) Note: Not all details are specified in the descripƟon. For instance, we don’t know where exactly the system will work, how it will be powered (baƩery or grid), and how oŌen measurements will be taken. Resolving these issues is leŌ to you as the designer of the system. However, remember that each design decision requires a jusƟficaƟon. 3. General idea of the soluƟon: For such a simple system, one Arduino Uno board will be sufficient. To measure both h...
In our bid to increase the number of job applications we receive, we're searching for an expert to assist in creating effective job advertisements specifically catering to Facebook audiences. Here's what the job entails: - Prepare and publish 3 job-ad posts per week, highlighting job qualifications, employment benefits, and job locations. - Develop and publish 2 additional weekly post promoting our business. -seo to our website Ideal Skills: - Proven track record in social media advertising, particularly on Facebook. - The ability to write concise yet engaging job postings. - Knowledge of the mechanical labour hire industry would be an advantage. - Demonstrated ability to target ads for increased engagement and response rate. Please note, tracking and ad...
...system for bidirectional power exchange of up to 8 kVA across all four quadrants. The system utilizes the IM828-XCC platform, with control achieved via galvanic isolation through the Arduino DUE. Your main tasks involve adding the ADuM1401 Digital Isolator for Arduino connection, connecting the motor and generator functionalities, integrating the iMOTION2go chipset, and creating the PCB design using KiCad. Project Tasks: ADuM1401 Digital Isolator Integration: Add the ADuM1401 Digital Isolator to ensure galvanic isolation for the Arduino DUE connection. Implement necessary connections and ensure compatibility with existing components. Motor and Generator Connection: Ensure seamless functionality of both motor and generator modes in all four qua...
I need a talented developer to assist in integrating a motor with an ESP32 microcontroller. Here are the project specifics: - Actuator: Tinymovr Axion A1 - Communication Protocol: The ESP32 should communicate with the CAN bus us...integrating a motor with an ESP32 microcontroller. Here are the project specifics: - Actuator: Tinymovr Axion A1 - Communication Protocol: The ESP32 should communicate with the CAN bus using the CAN @ 1mbps - Toolset: I require the project to be developed using the Arduino using Arduino tinymovr library. The ideal candidate for this project will have a background in microcontroller programming, specifically with the ESP32, and demonstrable experience with motor control. Prior experience with the CAN FD protocol and the Arduino frame...
I'm in need of a talented logo designer who can create a modern, sleek logo for use on my website and social media. Key Requirements: - Modern Style: I'm looking for a logo that embodies a modern aesthetic. - Icon Only: The design should be icon-based, without the inclusion of text. - Digital Optimization: The final logo should be optimized for online use, ensuring it looks sharp and professional on both desktop and mobile screens. Ideal Skills: - Experience in modern logo design. - Proficiency in creating iconic logo designs. - Strong understanding of digital optimization for logos. Please provide your portfolio when applying.
I have given Start tim...vale < G col, that cell is red, same process for all col) 9:15-9:25 is 1 10Mins during that time, how many time(count) E col value>G col value( Ascending not decending) Default value is 1, when e col value less than G col and comes again > G now count value is 2 same process for all 10 mins count( I have given any start time, Interval, end time, It will automatically copy the data and process the given time duration. Note: I dont know about coding, If you install the code and run successfully at my system thereafter I will hire you and release the payment. If you agree this term you will apply this task Budet is 300 INR and Good review, Dont expect more I am not big fish. it is difficult job dont come for Money you should ...
I am looking for a freelancer who is experienced in embedded code, specifically Arduino. I have a specific project in mind that requires the use of embedded code. Skills and Experience Required: - Proficiency in Arduino programming - Strong knowledge of embedded code development - Experience in working on projects involving Arduino and RS485 Modbus protocol Refer the datasheet attached if needed The purpose of the project is not specified.
I'm in need of an Arduino-based relay switch that can operate multiple circuits serially. The purpose of this project is to start lights in a serial fashion, using physical buttons. Key Requirements: - Build a reliable relay switch: The switch should be able to handle automation for up to 15 relays. - Physical Button Interface: The relay switch must be operable via physical buttons for a user-friendly experience - specially to set adjust time delay between the serial switching Ideal Skills: - Arduino Programming: Experience in programming Arduino to build relay switches. - Circuit Design: Proficiency in designing circuits for handling multiple appliances. - Remote Control Systems: Knowledge in implementing remote control systems for a...
I'm looking for a freelancer who is proficient in using the Proteus Design Suite for an intermediate-level simulation project involving an Arduino microcontroller. Key Requirements: - Proficiency with Proteus Design Suite: The ideal candidate should have prior experience in creating and executing simulations using this platform. - Intermediate-Level Microcontroller Simulation: The project involves simulating an Arduino microcontroller which requires a good grasp of microcontroller programming and circuits. - Attention to Detail: The successful freelancer will need to ensure high accuracy in the simulation results. - Timely Delivery: The project has a set timeline, which the freelancer should adhere to strictly.
