Structural Engineering Jobs

I need structural engineers who works comfortably in both Staad Pro and Tekla Structures to take complete ownership of the analysis and detailing of several modular and pre-engineered buildings. The assignment begins with a full civil–structural analysis in Staad Pro. All calculations, load cases, and connection checks must satisfy AISC as well as the relevant BSI codes; submit the design brief and Staad files for review before moving on. Once I approve the analysis, shift into Tekla to drive the detailing phase. Because the project moves straight to fabrication after sign-off, I require highly detailed shop and fabrication drawings: every splice plate, bolt, weld symbol, bracing member, anchor plan, and setting-out dimension needs to be shown. Alongside the drawings, compile a fu...

I’m setting up a new industrial warehouse and need a qualified structural engineer who can take the project from concept to fully-engineered plans. The immediate scope covers two key services: • Structural analysis – verify loads, wind/seismic resistance, and foundation capacity for a clear-span steel frame warehouse (approx. 35 m x 60 m; height 10 m). Please use recognised software such as , ETABS or SAP2000 and reference the latest IBC/ASCE codes. • Design & planning – generate complete construction drawings, connection details, and material schedules ready for permit submission. Native files in AutoCAD or Revit plus stamped PDFs are required. If you can also handle inspection and certification later, let me know; I may extend the contract once con...

I need a complete engineering drawing package for an existing carbon-steel wall that is already in place on site. My goal is to carry out a thorough safety assessment, so the drawing must capture every critical detail needed by a structural engineer or inspector. Please base the work on accurate field measurements of the current installation, then translate those into clean CAD drawings (AutoCAD or compatible). Alongside the drawings, I also need: • Fully dimensioned plans, elevations, and sections • A clear material specification covering the exact grade and thicknesses of the steel members, welding details, and any fasteners or anchors in use • Load-bearing calculations that verify the wall’s capacity against current codes and demonstrate its safety margin Del...

Im looking for concrete engineering in Australia, in particular steel reinforcement design expertise. To work through ppportunities for software and efficiency.

1 About the Survey and this Report 2 Of the Vessel 3 Hull 4 Hull Internal 5 Deck 6 Skin Fittings and Other Through-Hull Apertures 7 Stern Gear 8 Rudder and Steering 9 Cathodic Protection 10 Cabin 11 Access to Accommodation 12 Windows and Ports 13 Mooring Arrangements 14 Navigation Lights 15 Bilge Pumping Arrangements 16 Firefighting Equipment 17 Emergency Equipment 18 Engine and Installation 19 Fuel System 20 General Accommodation 21 Gas Installation 22 Fresh Water and Sanitation 23 Electrical Installation 24 Heating and Ventilation My full terms and conditions Images Standard text on each report I need an app ready report generation as i go through each category, I also need a specific hull measurement table

I’m relocating my small-batch coffee roasting operation into a 2,100 sq ft industrial unit that offers a generous 30 ft clear height, and I want to take full advantage of that vertical space by adding a mezzanine. The upper level will be the heart of production—a coffee-roaster processing plant that must safely accommodate my 30 kg drum roaster, green-bean silos, chaff collection and all ancillary ventilation and electrical runs. Alongside the roasting area I need a compact suite of private offices where two people can work comfortably without being overwhelmed by the heat, noise or smoke of the roast cycle. Below the mezzanine I’m considering an espresso bar and display shelving for my six signature blends, so clear sightlines, customer flow and headroom under the struc...

I will provide DXF drawings for several serpentine interconnect geometries and need a full non-linear finite element study that zeroes in on their load-bearing capacity. The work starts with layered-shell models to screen all designs, then moves to local 3-D refinement wherever strain or stress peaks appear. Scope of the simulations • Uniaxial tensile loading to global engineering strains of 10 %, 20 % and 30 % relative to the initial end-to-end length. • Additional runs that rotate the load direction so any anisotropy in response is captured. • Large-deformation material and geometrical non-linearities must be included. Key outputs for every geometry • Force-displacement curves and the effective axial stiffness. • Maximum principal strain in materials • von...

I need a professional to help with a home extension and loft conversion. The primary focus is on extending the kitchen. Key Requirements: - Extend kitchen to add more space. - Consider using the extra space for dining, storage, or workspace. Ideal Skills and Experience: - Expertise in home extensions and loft conversions. - Strong understanding of kitchen design and space optimization. - Ability to manage project from concept to completion. - Excellent communication skills to keep me updated. Please provide a detailed plan and timeline.

I have a full architectural set for a multifamily building already accepted by planning in New York State. The remaining task is the structural package, entirely in wood framing and ready for submission to the local building department. Scope of work The building must be detailed in two parallel roof schemes—stick-framed and pre-engineered trusses—so the contractor can price both. Floor framing should likewise show a Nordic I-joist layout beside an all-truss alternative. Wherever beam spans exceed standard tables, size LVL girders and headers, keeping calculations to the standard specifications referenced by NYS Residential Code and the IBC. Fire-rated walls need to be identified and tagged on the plans; details must follow the requirements of NYS amendments to the IBC wi...

I have commercial construction drawings for a project that were already signed and sealed from Jacobs Engineering. The permitting department for the city is subcontracted from Jacobs which creates a conflict of interest. I need an independent PE to sign and seal the drawings. The project is for a concrete pad and a metal canopy structure in a water treatment plant.

I am a structural engineer looking to partner with a PE for a project in Anchorage, AK. The scope of work is to check the roof framing to support new loads imposed from the removal and replacement of mechanical equipment. The project is located in Anchorage, AK.

I need a detail engineer for a building framework. The project involves: - Detailing of columns and beams - Connections and joints - Foundation details It's crucial that you adhere to specific codes and standards that I'll provide. Ideal skills and experience: - Expertise in structural steel detailing - Proficiency in relevant software (e.g., AutoCAD, Tekla) - Strong knowledge of engineering codes and standards - Attention to detail and accuracy Please include examples of similar work in your bid.

I have my eye on a 75-year-old home just outside Harrisville, MI. The house and a separate garage are partly built into a steep hill that rises 60 to 80 feet above the house. It appears that decades of slope wash have crept up around the buildings, but it is not easy to determine what is wash and what was there when the house was built. The first floor of the house is block. It is buried at the back so that the second floor is at ground level. It looks like a normal house in the front. Sort of like a walk out basement. The second floor is wood. There is no sign of failure inside that we can see There is signs of a small amount of water leaking leaking through the back wall in one location. The former owner was waterproofing the back wall (the materials are sitting there) but he died ...

I need a licensed Professional Engineer (P.E.) in Washington State to review and stamp my detailed crane design plans. These are workstation cranes with capacities of 100kg to 2000kg. The crane is intended for lifting at an industrial site. Requirements: - Must be a licensed P.E. in Washington - Experience with cranes and industrial site applications - Ability to review and approve detailed engineering plans Ideal Skills: - Structural engineering expertise - Knowledge of state regulations and compliance Please provide proof of licensing and relevant experience.

Project Overview Plot Size: 40 ft × 60 ft (2400 sq ft) Structure: Ground + 2 floors (G+2) Starting Level: Ground floor Architectural Requirements Floor Plans: Ground, First, and Second floors Elevation Design: Modern/Contemporary/Traditional style options Sections & Details: Cross-sections, staircase details, roof details 3D Views: Exterior and interior renders Structural Requirements Foundation Plan: Footing layout Column & Beam Layout: Structural drawings for all floors Slab Reinforcement: RCC slab details for each level Staircase Design: Dimensions, reinforcement, railing details Services & Utilities Electrical Layout: Wiring, switchboards, lighting plan Plumbing Layout: Water supply, drainage, sanitary fittings HVAC Plan: Ventilation, AC ducting Rainwater Harvestin...

I will provide DXF drawings for several serpentine interconnect geometries and need a full non-linear finite element study that zeroes in on their load-bearing capacity. The work starts with layered-shell models to screen all designs, then moves to local 3-D refinement wherever strain or stress peaks appear. Scope of the simulations • Uniaxial tensile loading to global engineering strains of 10 %, 20 % and 30 % relative to the initial end-to-end length. • Additional runs that rotate the load direction so any anisotropy in response is captured. • Large-deformation material and geometrical non-linearities must be included. Key outputs for every geometry • Force-displacement curves and the effective axial stiffness. • Maximum principal strain in mater...

I am ready to move a civil structure into construction and now need complete shop drawings for its slab-on-grade foundation. The architectural plans and structural design notes are already locked, so what I’m looking for is a set of fabrication-level drawings that a contractor can use without further clarification. The scope is limited strictly to the foundation—no framing or roofing at this stage. I will supply the PDF/ DWG background files, design criteria, and soil report as soon as we start. From you, I expect fully detailed plans, sections, reinforcement schedules, pier and edge thickening details, embed and anchor layouts, plus concise notes that reference the relevant code provisions. Deliverables (all in metric): • PDF sheets ready for issue to site &bul...

I’m developing a 20,000 sq ft boutique hotel in Madhya Pradesh and need a sharp conceptual package that shows both efficient space planning and a striking façade. The entire building will be a full-steel PEB structure and I’d like the visual language to marry modern-contemporary lines with subtle heritage cues from central India. Core spaces to organise are a column-free banquet hall of at least 6,000 sq ft, a grand double-height lobby, 15-20 guest rooms laid out as a balanced mix of standard and suite categories, a dedicated gym / fitness zone, and a trendy, modern rooftop restaurant. I’m open to G+1 or G+2 depending on how you can best stack these functions while preserving clear circulation and maximising daylight. What I need from you • Conceptual 2D flo...

I need a structural engineer to design an LVL beam to support the second floor and replace the existing load-bearing wall that is 24’. The wall is adjacent to the living room, kitchen, and dining room on the main floor. The area measures 24 feet long and 20 feet wide. The joists are 2x8, spaced 16 inches on centre, perpendicular to the load-bearing wall, and are 12 feet long on one side and 8 feet on the other. The roof of the second floor is framed with trusses that transfer the load to the exterior walls, so none of the interior walls on the second floor are load-bearing. The main floor is supported by joists of the same size and a steel beam in the basement, which rests on the concrete foundation at one end, a steel post in the centre, and a 4-ply 2x4 post at the other end. Re...

Need Plans corrections per City of Phoenix comments and calcs of civil with license, I need to meet first and verify license with ID. I need a partner for future projects.

My residential build is already in the construction phase and I need a seasoned civil engineer to keep everything structurally sound and on schedule. The core of the assignment is three-fold: structural engineering oversight, day-to-day site supervision, and rigorous quality control/inspection throughout the remaining works. I will hand over current drawings, contractor schedules, and material specs so you can review what has been executed and flag anything that conflicts with design intent or local code. Regular presence on site—either in person or via coordinated virtual walk-throughs—is essential for you to: • Verify all structural elements match approved plans and engineering calculations. • Issue immediate corrective actions when workmanship or materials fall...

I’ve drafted concept plans for a 128 m² timber-frame house that will sit behind a concrete-block outer leaf. Now I need the wall framing translated into a build-ready structural package using softwood studs. Scope • Basic design only—focus on the key load-bearing wall elements. • Roof and floor systems are already covered elsewhere; this commission is walls alone. What I expect to receive • Plan and elevation drawings (PDF & DWG) showing stud layout, plate sizes, lintels, posts, hold-downs and connection points. • A concise member schedule specifying softwood grades, dimensions and centres. • Supporting calculations or structural notes demonstrating compliance with Eurocode 5 / BS 5268 (or your local equivalent) so Building Control ...

I need detailed as-built drawings prepared for USACE project completion documentation. The drawings must accurately reflect all systems and components. Required Systems: - Civil - Structural - Architectural - Plumbing - Mechanical - Electrical Ideal Skills and Experience: - Proficiency in AutoCAD or similar software - Experience with USACE standards and requirements - Attention to detail and accuracy - Ability to work within budget and deadlines Please include relevant experience in your bids.

Create a dynamic Excel workbook tailored for the South African market, using SI units (m, kN, MPa), to design and analyse reinforced concrete T-beams. Scope: Reinforced concrete T-beam design and analysis (including shear stress, bending, reinforcement requirements, etc.) Compliance with relevant South African design standards (e.g. SANS codes / Eurocode where applicable) Workbook requirements: Fully linked formulas across structured sheets Clear separation of inputs, assumptions, and calculated outputs Detailed design tables for reinforcement (flexural and shear), section properties, and load effects Automated calculations with minimal manual input Embedded tables and charts for visualisation and validation User-friendly layout with clear labels and guidance Additional requirement: ...

I’m working on a class project in Revit and keep getting stuck when it comes to structural modeling—especially placing and adjusting beams and columns so they behave correctly in different views and schedules. I’d like someone who can jump into my existing file, spot what I’m doing wrong, and then walk me through the right workflow so I understand the “why” as well as the “how.” Ideally, we’ll screen-share while you demonstrate best-practice beam and column creation, proper family selection, and alignment/connection techniques. I’m using the current Revit desktop release, so please be comfortable with its interface and structural tools. Deliverables I’m looking for: • A cleaned-up version of my Revit file with corre...

I need a folding marine railway designed for vessels up to 5 tonnes. The railway will need to span approximately 8 meters over ground before entering a river with a soft bottom at a 15-degree angle. The in-water portion should be removable and supported by inflatable floats. Key Requirements: - Can support vessels up to 5 tonnes - 8m long, 15-degree incline - In-water section removable, supported by inflatable floats - Client has electrical and control experience. Ideal Skills and Experience: - Experience with marine engineering (river water) - Proficient in working with galvanized steel - Knowledge of buoyancy and float systems

I need detailed steel reinforcement drawings from existing foundation plan . The final set should be delivered in both PDF and editable DWG formats. All I’m looking for is bar placement for the concrete foundation, slab and foundation wall

I’m ready to turn my completed design for a 240 sq ft one-bedroom apartment into a fully permitted reality on my single-story home in St Petersburg, Pinellas County, Florida, USA. I’m looking for an architect who can take my finished layout and develop the construction plans and documents the city will accept for a rental unit. The job centres on translating my drawings into a permit set that satisfies the current Florida Building Code as well as local zoning and flood-zone regulations. Because the space will operate as a separate rental, the plans must clearly address ingress/egress, fire separation, sound attenuation, HVAC, plumbing, and dedicated electrical service. Key deliverables • Signed and sealed architectural drawings (site plan, floor plan, elevations, sec...

I need a drawings for a 15x20 detached storage structure primarily for tools and equipment. The structure should include: - carriage doors Ideal Skills and Experience: - Experience in building detached structures - Knowledge of shelving installation - Ability to ensure durability and security for storage purposes Please provide examples of similar work done.

I need a qualified stress analyst to run five small-diameter petroleum piping models in Caesar II (or an equivalent program) and demonstrate that they meet ASME B31.4. The welded lines are all 150-lb carbon-steel headers that tie into an API 650 storage tank, and the key outcome is an accurate set of nozzle and shell loads so we can finalise the tank reinforcing pad. Scope of analysis • Build or refine the five provided Caesar models, confirm material and section data, and set up all design temperatures and pressures I will supply. • Apply the seismic acceleration parameters I provide and perform a Response Spectrum Analysis. • Combine those seismic results with temperature and internal pressure cases so the governing load combinations are clearly shown. What I wi...

I’m ready to put up a detached, two-car garage that measures roughly 22' × 23' with a noticeably high-pitched roof. The look I want is clean-lined and modern, yet it has to be built in brick so it blends with my home’s exterior. Inside, I need the roof volume used efficiently, so please factor a full-width storage loft into the design. What I’m looking for from you: • A complete drawing set (site plan, floor plan, elevations, roof framing, and any necessary structural details) prepared for permitting in my area. • A concise material schedule that calls out the specific brick type, roof covering, framing members, door specs, and any hardware needed for the loft access. • If possible, a simple 3D model or a few rendered views so I ca...

I need detailed design specifications for piers to support a barndominium. The design must be based on soil testing and comply with building standards. Key requirements include: - Size and dimensions - Material type - Load-bearing capacity The most critical aspect is load-bearing capacity. While I have some specifications, I'm open to recommendations. Ideal skills and experience: - Structural engineering - Knowledge of building codes and soil mechanics - Experience with residential foundation design

I need a foundation designed for a single-family home on clay soil. The foundation type should be a crawl space, with standard load-bearing capacity. Key Requirements: - Design for crawl space foundation - Adapted for clay soil conditions - Standard load-bearing capacity Ideal Skills and Experience: - Experience with foundation design in clay soil - Knowledge of crawl space foundations - Structural engineering expertise

I need an engineer to provide stamped documents for a small event tent (18x24 feet). The scope includes: - Structural analysis - Wind load calculation Ideal Skills and Experience: - Licensed structural engineer in COLORADO - Experience with temporary structures - Knowledge of local building codes and regulations

I need a complete, permit-ready drawing package for a single-family, ranch-style modular home that will be placed in ZIP 36541. The design must feature an open floor plan with a split-bedroom layout, and every sheet has to carry a current State of Alabama architect or engineer stamp. Scope of work – Foundation engineering: footings, piers, and all attachment/anchorage details suited to local soil and wind requirements. – Full architectural, structural, electrical, plumbing, and mechanical sheets formatted for county submittal. – Code notes and calculations that satisfy the latest Mobile county Alabama-adopted IRC/IBC. – Separate schedules for multiple identical units so I can reproduce the same plan on several lots. After I file for the permit, I may receiv...

• Project: Attached Pavilion / Patio Cover • Location: Rear of residence • Size: 20’-0” wide (along house) × 18’-0” deep • Style: Open gable roof (not shed) • Use: Covered outdoor patio ⸻ STRUCTURAL INTENT (DO NOT CHANGE DESIGN) • Front support: ONLY (2) posts total • Beam: Engineered LVL spanning full 20’ • Posts: 6x6 structural (wrapped for appearance) • Roof type: Open gable, ridge perpendicular to house • Ceiling: Exposed structure with tongue & groove pine Important note to include: “Design intent is a clean, open span with no intermediate posts.” ⸻ CRITICAL DIMENSIONS • Width along house: 20’-0” • Projection: 18’-0” • Post lo...

I need a complete ETABS model for a residential high-rise (eight floors and above). All architectural and structural drawings are already prepared, so you will be working from detailed plans rather than guessing the layout. What matters most to me is an accurate 3-D model that reflects the provided column grids, slab thicknesses, wall locations, and load cases. Please set up the full analysis environment—materials, section properties, lateral load combinations, and any required diaphragm assignments—so I can open the file and run checks immediately. Deliverables • ETABS *.edb project file ready for analysis • Brief notes explaining modelling assumptions, load combinations, and any simplifications made If you prefer a particular ETABS version, mention it s...

I'm seeking a skilled civil engineer specializing in stormwater management for a subdivision project in Florida. The project is currently in the design and planning phase. Key Requirements: - Conduct comprehensive site analysis and evaluation - Collaborate on stormwater management design - Assist in permit acquisition Ideal Skills and Experience: - Expertise in stormwater management - Familiarity with Florida regulations - Strong analytical and design skills - Experience in subdivision projects Please provide relevant experience in your bids.

I need a complete finite-element model of a Warren through truss bridge built in ANSYS (Workbench Mechanical or APDL). The task covers geometry creation, material assignment, boundary conditions and, most importantly, a dynamic study that captures wind and traffic effects. For wind, please implement a realistic fluctuating pressure profile; for traffic, model moving axle loads that travel the bridge length with appropriate speed and spacing. Time-history or transient structural analysis is preferred so that true stress-strain and displacement histories can be extracted. I have only a broad idea of where sensors should sit—mid-span, panel points near supports, and a few along the top chord—so I will rely on your structural-health-monitoring experience to pin down the exact n...

Need Structural Drawings for 2nd & 3rd Floor (G+3 Building) Hello, I am looking for an experienced Structural Engineer to prepare structural drawings for the 2nd and 3rd floors of my G+3 building. The basement and first floor are already constructed, and I need proper structural design and detailing for the upper floors ensuring safety and continuity with the existing structure. Project Details: • Building Type: Residential/Commercial (Mixed use) • Status: Basement + Ground + 1st Floor completed • Requirement: Structural design for 2nd & 3rd Floor • Architectural layout is available (DWG/PDF) Scope of Work: • Column layout continuation and load analysis • Beam and slab structural design • Reinforcement detailing (RCC drawings) • ...

Hi, I require all structural details to be fully redrafted into a unique New Engineering company Australian drafting standard. These must become our company’s proprietary detail library. Important: These must NOT resemble the original drawings stylistically. Engineering concepts remain the same but drafting must be original. Requirements: • All details must be redrawn from scratch • Do NOT trace existing details • Create unique line hierarchy (slab lines, beam lines, wall lines etc) • Create your own section presentation style • Create organised headings and title structure • Develop consistent reinforcement presentation • Develop consistent dimension placement rules • Create a unique note format • Use proper structural drafting conv...

I’m looking for a civil engineer who can take full responsibility for the structural design of a new residential foundation. The project is still at concept stage; I have a site survey and will share soil data as soon as the geotechnical report is finished. What I need from you is a complete foundation package that satisfies local building codes and is ready for permit submission. Here’s what I have in mind: • Calculations covering bearing capacity, settlement, and seismic/wind loading • Detailed footing, slab, and reinforcement drawings in DWG/PDF • A concise design brief that explains assumptions, codes followed, and key design checks If you are licensed to stamp drawings in my jurisdiction, please note that in your proposal—otherwise, an unstamped desi...

I need a mechanical design engineer who can turn my concept for an industrial hydraulic tilting table into a complete, fabrication-ready package. The table must safely handle heavy loads over 2 000 kg while tilting through 0–45 °, and its movement has to be managed by a fully automatic hydraulic control system with position feedback, safety interlocks, and a clean operator interface. The schedule is tight: I’d like to kick off immediately, see a first concept layout within a few days, and iterate rapidly to final approval. Throughout, I expect solid adherence to ISO/ASME standards, careful attention to weldment rigidity, and documented strength calculations that demonstrate an adequate factor of safety at every tilt angle. Deliverables • 3D CAD model (SolidWorks or I...

Accomplished lead structural designer with 15+ years of EPCM experience in offshore, refinery, petrochemical, LNG, and oil & gas projects across the Philippines, UK, the USA, Malaysia, Chile, Saudi Arabia, Japan, and Canada. Expert in Tekla Structures, PDMS, SP3D (S3D), PDS Frameworks Plus, E3D, Revit, AutoCAD, SmartPlant Review, and Navisworks. Strong background in FEED, detailed engineering, 3D structural modeling, steel fabrication detailing, multidisciplinary coordination, and construction visualization. Proven ability to lead design teams, conduct model audits, resolve clashes, and deliver fabrication-ready outputs aligned with international engineering standards. CORE COMPETENCIES ● Tekla Structures 3D Modeling & Steel Detailing ● Offshore & Onshore EPCM Struc...

I’m looking for a licensed structural engineer to review a single-family residential project and issue a formal verification letter that I can submit to my local building department and lender. The house is already framed and dried-in; what I still need is professional confirmation that the foundation, framing, and roof structure all meet current code requirements and were built in accordance with the approved plans. Here’s what I need from you: • A brief site or plan review of the foundation, framing, and roof structure (whichever you prefer—on-site visit or detailed plan analysis, depending on your state’s rules). • A signed and sealed letter, on your professional letterhead, clearly stating that these three elements are structurally sound and compl...

I’m ready to move a commercial building from concept to fabrication and I need a detailer who works confidently inside SDS/2. All architectural drawings and the full design specification set are in hand and will be shared on day one. Scope The package covers every steel element on the job: beams and columns throughout the frame, all bracing and connection work, plus the stairs and handrails. I’m looking for a clean, clash-free SDS/2 model and the coordinated shop drawings that flow from it, so the fabricator can cut steel the moment they arrive. Connection design should follow the parameters already defined in the engineer’s spec; I’ll supply those figures alongside the drawings. Deliverables • Complete SDS/2 model with all member sizes, connections, ...

I need a licensed civil / structural engineer who can quickly prepare two documents for a small ground-floor shop (8 ft × 14 ft, roughly 10.4 m²) in Delhi 110042. The space is already built and in good condition, but I have no existing drawings, so both items will have to be created from scratch and stamped for government use. The first deliverable is a Structure Safety Certificate that satisfies the Municipal Corporation of Delhi’s requirements. The second is a simple site plan, again in line with Delhi-specific codes, showing the shop’s footprint and surrounding plot as required for my MCD trade licence application. I will supply on-site photos, measurements and any other details you request. What I need back is: • A signed, sealed PDF of the safety certifi...

My upcoming residential building is ready to move from concept to construction, and I need an experienced civil engineer who works on a straightforward per-meter rate instead of the usual percentage-of-project model. Your main focus will be structural analysis followed by hands-on project management through to completion. Here’s the flow I have in mind: • Structural analysis: Prepare all design calculations, load assessments, reinforcement detailing, and stamped drawings. I normally review in AutoCAD and am comfortable if you prefer SAP2000, ETABS, or similar for modeling—just be ready to supply the native files along with PDF sets. • Project management: Translate the approved design into a practical work plan, develop a detailed schedule, and oversee day-to-day pr...

I need a full structural design for a ground-mounted array that will hold 16 solar panels and safely withstand local wind speeds of 160 km/h. The site is perfectly flat, so the design can assume a level foundation without the extra complexity of terracing or stepped footings. I would like the primary framing and supports detailed in steel—please base all section sizes, fasteners, and corrosion-protection notes on that choice. What I expect from you • Complete set of dimensioned drawings (plan, elevation, and relevant sections) in PDF and the original CAD format. • Structural calculations that verify deflection, uplift, and overall stability at the stated wind load. • A concise material list with steel grades, coating specs, and hardware. • Simple installa...

I already have a full set of 2-D drawings for a three-storey residence and now need them transformed into an accurate, construction-ready 3-D package. Every discipline—architectural, structural, interior, MEP and landscaping—carries equal weight for me, so the model must knit all of them together seamlessly. Scope of work • Translate the existing floor plans into a coordinated 3-D model (Revit, ArchiCAD or similar BIM platform preferred). • Generate exterior elevations, building sections and site grading that align perfectly with the model. • Model the complete landscape design, from hardscape contours to planting beds. • Develop the interior in detail, including furniture layout, lighting design and floor-finish specification. • Add fully ro...