Mp3 to arduino buzzer jobs
I'm building a GPS Guided Robot. The car has to go to way points. I'm having struggles with the code. Thank you
Hi Jishnu I need support to modify an open source project based on Your reviews are good and hourly rate is low so I am contacting you first. I use VScode, platformio either esp-idf and arduino with esp32 target on linux. Hopefully you can work with this and also remote desktop. Should you be interested lets chat. If we work well together I'm open to a higher hourly rate later.
Basically, i am using an Arduino UNO with an IMU to detect and record waves. I am not a programmer but have managed to get some useful files which work somewhat. The main difficulty i face is combining them all into 1 useable file. I am working on a project in Arduino with limited coding knowledge. I have a few sketches of code which work individually and I'd like to combine them into 1 working code. Code should be able to detect a wave and measure wave parameters such as frequency, height and period. thanks.
1. I'm looking for an expert video editor to do 40 YouTube videos editing for me at a low price. (each below 10 minutes). 2. I will provide you human voice (in MP3) for each video. Your job is simple. Take Copyright free footage (from net) and add audio (which I already provided you). On Screen, text(s) should appear (2-3 word heading in bold and big letters) about which point the voice is speaking about. Save it as MP4. Done. 3. No creativity required. It is mechanical work. That's why, I am seeking low cost work. Presently I am doing it myself so I know technicalities of this work. 4. I am fed-up doing same work everyday. Thus, I am searching someone who can do it for me. 5. High price people, I respect your skill set but this project does not need that level...
I am searching for an experienced freelancer to provide voice over services for my project. Specifically, I need a freelancer who can provide narration in an MP3 format with a good audio quality. The successful freelancer should include their experience in their application, which should also provide detail about their project plans. This project requires work in the voice over field, so experience in this field is a must. I will be checking any past work from the successful freelancer, so please make sure that the sample is relevant to the job at hand. Looking forward to receiving your application!
I have four Teknic motors, four 0-10V inputs, and two enable inputs per motor to be coated to a ClearCore controller. One analog input will control the motor position and the 2 enable bits will allow movement. there is a sample program attached for a single motor marked example, and my attempt. it is bad but it may give you a better idea on where it is going. There is a library here, there is an Arduino wrapper here
Hi I need someone who has worked on MPU6050 software for DMP. I’m stuck in dmp initialization. I need to run the sample code. It’s using I2C device and I can get register address 0x68. All wiring are correct. If you have worked on this DMP, then let’s talk. I cannot pay for trying. Need ASAP.
I need to adopt a code to NUCLEO STM32F413ZH within Arduino IDE which is now written for STM32F407. It is a CAN-BUS Rx Tx code. I will provide working code and the datasheet for stm32f413zh. I'm paying only after the job is done. No extra payments when work in progress. This job should be fast and simple for a person who knows what he is doing.
I have an existing circuit board (PCB) project which I need to bring up to date and then organize ordering for a new PCB Arduino project. This is an urgent project so I am looking for assistance in completing it as quickly as possible. I have selected the existing project choice for Question 1. Regarding Question 2, you will need to list and find any additional components that the PCB manufacturer will need to build the PCB. Lastly, regarding Question 3, I would like this to be completed by the end of this month. I'm looking for an experienced freelancer to work on this project and complete it within the agreed timetable. If you have experience in PCB design and components sourcing, then I invite you to reach out and I'll...
...and hardware integration to develop a system that can control a wheelchair based on eye blinks. The project involves developing a Python code that can capture eye blinks and the frequency of eye blinks using a camera attached to a wheelchair. The code should then transmit this information to Raspberry Pi and Arduino microcontrollers, which will be responsible for controlling the movement of the wheelchair. The ideal candidate should have a strong background in Python programming, image processing, and experience with hardware integration. Familiarity with Raspberry Pi and Arduino is also desirable. The candidate should have the ability to work independently and be able to complete the project within the given timeframe. If you are passi...
I'm looking to set up an Arduino project and need some assistance getting it going. I'm working on a Windows platform, using an Arduino Uno model, and have all the necessary components and hardware that I need. I'm hoping to find someone who can provide me with an exact guide line so I can get started on my project. Ideally, this person would have experience with Arduino, be knowledgeable in coding, and have excellent troubleshooting I have trouble setting this up need a fast and efficient guideline to set it up 1 more project to come after that
...electronic shop and have then written a program on Arduino and the stuff works. It is a LOT of wires, it took ages to assemble and is obviously not the way to bring the prototype forward. I would need someone to design a PCB board which would basically do exactly the stuff that I have drawn (please note that I would need a PWM on the stirrer as well, this is not present in the current wiring scheme). Everything written in green in the wiring scheme is in a different part of the prototype (ie in a physically different container, linked by a 5 way cable). The whole project is on a 12 V circuit apart from the two UV lights which need 38 V. Input is 12 V. Upon project assignment I will send the designs with the size constraints over. Aim is to have every...
I have a working prototype using an arduino nano, motor controler & switches to control a motor moving a lever between 2 limits. I would like to convert the protoype to a production PCB and remove any redundant components from the arduino and motor control boards. (should continue to allow for arduino software updates via usb) and am looking for someone who can produce the necessary design documentation. I am not an electronic engineer, I have built a working version but have struggled using open source software to produce the standardised documentation (schematic, pcb layout, bill of materials) which seem necessary to engage with a board manufacturer. I will provide a drawn connection diagram, photos of the prototype (if ...
...looking for a software development expert to create a hello world program using an ESP32 camera on an arduino platform. This project requires an intermediate level of programming knowledge, and familiarity with the ESP32 camera and the arduino environment. The successful candidate will be responsible for create a hello world program which will detect the camera, set it up and be able to capture and display images or videos to the screen. They will also be expected to debug the code and suggest improvements to the program. This project is perfect for a skilled software developer who has experience creating camera-based projects, debugging code and producing professional results for clients. The successful candidate will be knowledgeable ...
I am looking for a Freelancer to help me set up an STM32 Arduino development environment. The processor architecture I am using is STM32. I'm not sure if I need a custom bootloader but I'm open to exploring the possibility. I want to set up either a Makefile or PlatformIO environment for this project. The person I hire should have experience working with both STM32 processors and the Arduino IDE. I'm looking for a reliable person to get this job done quickly and with quality.
I am looking for someone to help me write Arduino code on a Mega platform. I already have the necessary components for the project and simply require someone to write code that can help me with data logging. I am familiar with Arduino programming and am looking for someone who can deliver high quality code promptly. If you are an experienced Arduino programmer and think you can help me with this project, please get in touch.
...Format - Less than 1MB - MP3 high quality Due to the limitations of the contest, please share a sample in one of the following formats: MOV, MPG, MPEG, AVI, FLV, MP4 The phrases to record are: - Welcome to (business name)! Our business hours are Tuesday to Friday from 10:30am to 9pm, and weekends from 9:30am to 9pm. We are closed on Mondays. If you want to inquiry about our catering services, please feel free to reach out at (email). Looking forward to seeing you! - Thank you for calling (business name)! We are busy attending other customers, meanwhile let us tell you what is happening at (business name), in addition to our legendary taco Tuesday, (business name) is the place to be on Wednesday and Thu...
Hi, I'm looking for an experienced Arduino programmer who can help me complete an advanced hardware configuration using Arduino hardware and software programming. This includes programming sensors. Additionally, I need assistance completing a database-driven front-end desktop application designed specifically for Windows. The ideal candidate should have extensive experience with Arduino and Windows-based development, and should understand how to put together complex hardware configurations and applications. This project requires a precise attention to detail and a high degree of accuracy in programming and troubleshooting. If you are up to the challenge and have the necessary skill set, please contact me so that we can discuss the project in g...
I'm in need of some help adding a sound (voice over) overlay to my video. MP4 - video file MP3 - Sound File Both are 3 minutes long.
We need convert orchestral MP3 to midi score (playable by musician, not automated with software). Almost all tracks are orchestrated (band, symphonic). We give you a MP3/MP4 video You will return MIDI file with 6 tracks: bass line, chords (up 3 voices), melody2, melody1/singer Please quote for every minute of music x 6 tracks. The notation must be done correctly: avoid notes out of time or incomplete chords.
...developer with experience on building a DDEX distribution system where the user can upload the tracks and albums, images to distribute on different dsp sites like Spotify, Beatport, Apple Music, etc and receive music from our industry partners. With functionalities where the user can upload any format of track file like mp3, wav, flac so that it can be encoded into different formats and can be distributed to different dsp sites depending upon required formats. The administrator can upload the royalty files in different formats like xls, csv, txt. provided by dsp sites and calculate the revenues for the artists and label user’s earned by their distributed albums. The encoded tracks need to be stored on cloud storages like amazon S3. The assets can be dow...
Make one prototype(3d printed) of animatronic eyes with motion tracker based on Arduino and powered by compact power source (powerbank)
We need a website which interface with Arduino UNO with the help of GPRS module. In webite we shoud be able to monitor the status of the field(ie. consumer id no. And its usage detals). At the consumer side he should be able to control the waterpump and solenoid valve(for motor on off switch and for valve it should be controlled by user on time basis ). In website there should be 2 login one for distributor and another for consumer. In distributor login id with unique password And different user id(meter id) and there field status. At consumer end Login option with id and password Motor on/off Button and status. Solenoid valve status ie on off valve controling time. As a input from consumer as per requirement. Data should be save in any free cloud.
Hello! I am seeking experienced coding to create an application for weighing on an Arduino device and the Orange Pi. I am looking for a programmer who is familiar with the Arduino and OrangePi coding, specifically utilizing Python as the programming language. The goal is to connect a weighing scale for industrial use, with an IoT interface. If you are comfortable coding for these boards, and working in Python, I would love to hear from you. Please let me know what your experience and approaches are and I look forward to working with you. (Removed by Freelancer.com Admin for offsiting - please see Section 13 of our Terms and Conditions)
hi, i have built a basic shooting game in java library processing. I need to attach Arduino uno as one input in the game. I want to shoot using pushbutton. Can you help me with the code or maybe how to build the circut?
...someone to create an ongoing selection of Solfeggio Binaural Sound tracks. These tracks will be used for relaxation, improving focus, and reducing stress. I am looking for someone who can create original Solfeggio, binaural sounds using all 9 frequencies. 1. 396 Hz: Fear, guilt, and shame relief 2. 417 Hz: Facilitate changes, remove negativity 3. 528 Hz: Positive transformations 4. 639 Hz: Relationship, connection, compassion 5. 741 Hz: Self expression, finding solutions 6. 852 Hz: Awareness 7. 174 Hz: Pain relief * 8. 963 Hz: Intuition 9. 285 Hz: Regeneration I would like the sounds very similar to this: They must be created in such a way I can loop them. Looking for a 10-15 minute audio. If this is economical, I will continue to work
I am looking for a professional and experienced voice actor to create a high-quality audio recording of a script I have ready. The recording should be for narration purposes, and will be between 1-3 minutes long. Because my script is already written, all that I need is for the actor to provide the voice for the piece. I am looking for a voice actor who can deliver a high-quality reading with great energy and engagement. The recording should be in MP3 format and ready for production. I look forward to hearing submissions. Thanks!
I am looking for an Arduino-based tracking system that can be used outdoors. It should be able to collect data in real-time, light readings. This Arduino tracking system will be used to monitor various environmental conditions, in order to help optimize performance and track important metrics. As part of this project, I am also looking for a user interface, so I can easily view the data collected from the Arduino tracking system.
I am looking to hire a freelancer to help me create a high resolution CAN bus speed readout with an Arduino. This is part of a bigger projekt where I am learning Arduino by making a rc servo controlled cruise control in my Tesla S Plaid. In this part of program I need a high resolution speed readout. The obtained frequency should be converted to km/h and presented on a TM1637 4x7segment display with one decimal for testing. The conversion should have an extra constant for easy fine-tuning. Every part of code should be commented in "tutorial example"-style. :o) The freelancer should have very good knowledge about Arduino as well as CAN Bus protocol. We are looking for someone who has experience in this type of work and is reliable and...
Need to write Arduino code for our project to work. What equipment including 1 relay [starting heating lamp] 1 step motor 1 button 2 limit switch 1 MAX 6675 temperatures measure [not yet connected] //What need to make When first launch or after restart. The platform moves to limitSwitch_2, pressing it and release, after stopping. That will means start position each time. 1. When click main button Pin7: Switch on relay Step motor starting to move in "X" speed for "X' steps [80 cm around] 2. When motor reach "X" steps it stops 3. Temperature sensor check temperature, if temperature is lower 200 degree, its just waiting 4. When temperature reach 200 degree, starting timer for "x" time (1 min for beginning) 5...
YOUR BID PRICE IS FINAL. NO LATER CHANGE ALLOWED. READ BEFORE BID. I need an experienced programmer who can develop a system of text to speech. I already have a website for mp3 to text download. It is in Python 3.7 so you should use that. Now you need to add another Tab there where users can upload their video in MP4, AVI format, play it with sound and in bottom there should be a timeline where users can write the movie text in time. Users can also upload their .srt files and edit The system to be like clideo.com. After editing users can download new .srt file. You need to install it on my server and set the whole thing there. I have Hetzner VPS with 4GB RAM, dockerized.. I don't deal outside freelancer platform. I don't pay upfront be...
I am looking for an experienced Arduino, HMI Nextion, and scale software developer to help with a project. This will be a software development project, so experience in this area is essential. Since the project will not require wifi connectivity, any related experience is not necessary. The length of the project is expected to be less than one month. If you have the skills and experience necessary to complete the project, I would love to hear from you.
I am looking for someone to help me with a project to convert my mp3 files to a higher bitrate. The source format is mp3 and I need them to be converted to 192 kbps without any additional changes to the sound format. I do not have any other specific requirements for the sound format, the target bitrate should be enough.
I am looking to develop an ebook audio reader. It will be used as a teaching system - The software must be able to: - 1. play an audio (MP3) file. - 2. Display an image while the audio is playing. Currently .Gif files. - 3. Allow a drag control to fast forward and rewind the audio. Also fast forward and rewind page buttons. - 4. Display a drop down box to go to a chapter directly. Possibly allow a second one to go to a certain section of the chapter. - 5. Allow settings for a pause screen to pause the audio when a diagram or picture screen is displayed. If this function is turned off, then the pause screen will be skipped and the audio is continuous. - 6. Allow for an in-app purchase to purchase additional chap...
I'm looking for professional voice-over audio recording services for my project. Specifically, I need a female voice for my project. I'm open to any style for this recording, so the right candidate should have experience creating strong recordings. No post-production work is required. The voice-over should be of professional quality, and should sound natural. If you think you are the right candidate, please apply today.
I'm looking for someone with experience recording in French who would be able to offer their services for a project I'm currently working on. This project requires an experienced female voice and requires the audio to be delivered as MP3, WAV or AIFF. The audio should also be edited or processed if necessary. I'm looking for someone who can provide elegant and expressive voiceover with great attention to detail. If you feel you have the skills to help me with this project, please don't hesitate to get in touch!
I looking for freelancer who can make for me sketch to Nano/Micro. What I need: - reading analog signal from potetniometer (accelerate pedal) - reading analog signal from another one potentiometer (angle sensor for steering wheel) - calculate output signal based on angle sensor and accelerate pedal - send two analog 0-5V outs Electronic will be connected to my e-trike with two motors on front. Is nececery to delivery less power to one motor when vehicle turn left or right. IMPORTANT: please bid offer with true value. I don't want to read (when chat) about different price.
Hello, I'm looking for an experienced Arduino programmer to write an code for an RGB addressable LED strip using a WS2812B-neopixel LED and an Arduino Uno board. The code should successfully control the LED strip, allowing the client to define a range of different color combinations and other visual effects. No additional components are required beyond the LED strip and the Arduino Uno. Expertise in programming LED strips and a solid background in electronics would be highly beneficial in this project. If this project interests you, kindly reply with your prior work experience and provide relevant examples of prior work in programming LED strips. I look forward to hearing from you!
...would like is one Arduino controller to do all of it but if that can't be done that's ok too. If you think you can design something more specific without Arduino I would actually prefer that. I'm building a game table and what i need is (4) small (Around 2”X 3"ish) independent TFT touchscreens that will be used to enter scoring. The display should look something similar to a calculator but i only need the numbers 0-9, add (no button, just input numbers and press “enter” button), subtract button, delete button (to delete one digit at a time in case the wrong number is entered) and a clear button to clear the score and start a new game. I will include an image to show what I’m thinking for ...
Need to design a MP3 Player end to end . Need to design a music player with following flow. Audio content needs to be played from the device output to a speaker. Option to play tracks as per definition to be triggered using external switch Audio files need to be loaded into the device via bluetooth (or WiFi) into the on board memory (preferably NAND or uSD card). Requirements : Mp3 player with speaker output 3W ( no earphone option needed). Voice recording - not mandatory -- good to have. On board memory - NAND (on board) / uSD (removable). Methods to update content - Wireless via phone application - Bluetooth/WiFi Optional method -- Update via USB Type C. Option to remove the uSD card and update c...
Need to write Arduino code for our project to work. What equipment including 1 relay [starting heating lamp] 1 step motor 1 button 2 limit switch 1 MAX 6675 temperatures measure [not yet connected] //What need to make When first launch or after restart. The platform moves to limitSwitch_2, pressing it and release, after stopping. That will means start position each time. 1. When click main button Pin7: Switch on relay Step motor starting to move in "X" speed for "X' steps [80 cm around] 2. When motor reach "X" steps it stops 3. Temperature sensor check temperature, if temperature is lower 200 degree, its just waiting 4. When temperature reach 200 degree, starting timer for "x" time (1 min for beginning) 5...
I am looking for an experienced professional to help me make small changes to an existing Arduino and MadMapper project. This project will require the use of an Arduino to control different outputs as well as MadMapper software to create visuals such as mapping and other effects. The hardware that will be used in this project is an Arduino and DMX Artnet, using 1 light beam, which will be used to generate signals that can be used to control different outputs. No existing components will be reused during this project, as it involves making small changes to an existing project. The software that will be used in this project will be MadMapper, which will be used to activate in Arduino some motion sensors whi...
I'm looking for a talented professional to produce a high-quality female voiceover (I have already written the words) with instrumental music in the background. The expected duration of the voiceover is 2-3 minutes, and the musical backdrop must be instrumental in nature. The final audio should be delivered in the best-quality sound format available (e.g. MP3, WAV, AIF). My budget is 20 dollars. Thank you
Hi Md. Masrur S., I noticed your profile and would like to offer you my project. We can discuss any details over chat.
I'm looking for a freelancer to help me develop a proof of concept of an external digital clock and shot clock (see attached image) that is connected to an iPad Pro via USB and includes the necessary Swift code (Apple Xcode). The hardware solution also needs to have 3 external input buttons. The connection should be reliable and the external digital clock should be highly accurate with a minimal latency (less than 10 ms). Solutions with Arduino, Raspberry Pi, etc are acceptable. The display unit may be with standard segments () switched on/off with relays, multiple led strips with WS2811 or preferably a led matrix (required display size is flexible but it must be possible up to 3 feet/1 meter) I'm looking for someone who can provide me
The project is to refactor the implementation of an open-access work of cultural preservation of an African society, an ethnographic project spanning fifty years of collaborative research. The goal of the project is to facilitate long-term accessibility and maintenance. This website has been developed incrementally over more than a decade with different programs, and it has obsolete and redundant code. The website has three levels of static, text-based webpages primarily in HTML4 and HTML5, with some CSS. You can find the current version of the work-in-progress at: Your task will be (1) to clean, update, or refactor the coding as appropriate; (2) to reformat the coding for legibility and easier maintenance; (3) to make the site’s pages corr...
...looking to have a state of the art web based audio video background noise removal software developed with a high degree of accuracy. I would like this software to be easy to use, and ensure safety and privacy for its users. This project should support MP3 and MP4 formats, and should require a completion time of 1 week. If you think you could be the perfect fit for this project, I'd love to receive your proposal and discuss the details further. Explained again: We are looking for an Expert level programmer that can create State of the art web based audio video background noise removal software Where people can upload their audio and video files - the output is files with background noise and echo removed. This information is self sufficient ...
I am looking for a freelancer to clean up an audio file for me, recorded in MP3 format. It is 3 minutes long and recorded in mono. I need noise reduction for all noises, removing background fan. The audio is from a piece to camera. But the good microphone was not switched on. So we got a very room sound with a fan noise in the background from overhead light. I would like to get a more crisp and clear audio track. The final video will have a music bed so that will conceal some of the hum etc. but I would like a cleaner track to work with. I need someone who can produce a cleaner sound from this distant (8 foot distance mike) audio recording.
I am looking for someone to help with a project in regards to an Arduino Can Bus Engine Guard. Specifically, I am looking for someone who can write a program for an Arduino Uno to work with MCP2515, LCD 20x4 and a GSM 900. The unit will only connect to the vehicles can-bus, so you must know J1939 protocol. It must get some readings from the ECM and when a fault occurs it must respond with relay outputs and can-bus signals to do certain things in the vehicle. The GSM must send out message alerts and also receive certain commands via sms, Whatsapp and Telegram to tell the vehicle what to do. Thank you!
