XenServer 7 Remote Setup support

I need an experienced operator of XenServer to assist us setup a private Server pool.

We have 2x Dell Poweredge R710 Servers in a Datacenter currently clean installed and not in production. We need remote support to assist with a small problem2 to get the 2 Servers into a Pool and also connect a HP Storage works SAN to the pool as shared storage over ISCSI

Servers are online with dedicated Public IP’s (Separate IP’s for idrac’s)

Servers have iDRAC remote management interfaces fully updated.

Currently they are online and working however during the process up moving the servers we had a network error caused but wrong Network config. After fixing the problem we get an error when we try join the 2 servers together using XenCenter.

The error is “the server you are connecting to has been restored from a backup of Server1, a server you are already connected too. This is a dangerous operation and not allowed” (Screenshot attached)

Each server can separately accessed normally with XenCenter but if you try add the other you get this strange error. If we must reinstall the server using iDRAC then this is ok but I don’t have experience doing this remotely and this is why I am seeking support from somebody more experienced with fixing issues via command line.

Once the pool issue is sorted we need assistance with setting up the HP StorageWorks P4300 G2 "Left-Hand" SAN. We need this as shared storage (In addition to the local storage on each server) for failover of important projects. Again this has a remote access DRAC that has a dedicated IP and a 4 port Network card installed.

Once setup we join it to the pool as shared storage and we are then finished.

Hardware is in a datacenter and we have no access to it over the weekend as such we are looking for experienced people to assist with remote setup. The servers have no current data on them and have not been used in production.

Cloud Computing System Admin

Project ID: #11077735

About the project