GPS Tracker with automotive grade components
₹37500-75000 INR
Paid on delivery
Design a GPS tracker with automotive grade components from Telit, uBlox and STM. I will provide the part numbers of the GPS module, GSM/GPRS module and the MCU. You will need to study the data sheets and design a GPS tracker. Given below are the specs:
. 10 digital inputs
. 10 analog inputs
. 5 digital outputs
. Operating voltage: 8V - 30V DC
. Operating temperatures: -40C - +85C
. Current consumption: 25mA when transmitting, 1mA when idle
. Ability to put power-hungry modules to sleep (when dictated by server) to reduce power requirement
. Support re-chargeable internal battery ranging from 800mAh - 2000mAh
. Work on internal battery for 48hr (ideally 1wk)
. Board should operate with and without internal battery, i.e., battery optional
. Support for multiple battery charging chemistries suitable for operation under -40C to +85C
. Multiple serial interfaces (5) for various peripherals such as camera, RFID, etc.
. BOM should cost less than USD 60
. PCB size should be 110mm x 65mm or smaller
. Use low profile through-hole components
. Use automotive grade components (AEC Q200)
. Should pass EMI/EMC compliance tests
. Should pass vibration compliance tests
. Internal GSM antenna
. Internal GPS antenna
. Ability to use external GSM antenna by placing a jumper somewhere.
. Ability to use external GPS antenna by placing a jumper somewhere.
DELIVERABLES:
. Schematics
. Gerber
. 5 working boards with basic POST to prove HW works. We'll put RTOS and our own firmware later
. IP owned by us
Project ID: #6046115
About the project
13 freelancers are bidding on average ₹97696 for this job
Respected sir, Let me introduce myself from Montronics electronics. We at Montronics working on customer based projects. We are working on Hardware, software and mechanical desings for our customers. We are team of pro More
hello sir i am revanth having experience of 1 year in designing, so my experience is good enough to develop the project as i had done earlier some circuit designing. waiting for your reply Thnaks More
I have in depth experience in embedded systems, if you allow me serve you through providing this opportunity to me I leave no stone unturned in satisfying your requirements to the best. Hope for your call. Thanks!
Dear contractor, We have done a lot of projects related with GSM/GPRS, GPS module. Even a small realtime GPS child tracking device with only 25mmx25mm size, some of them are being mass production. We think with our e More
Designing and Hardware Development as Embedded Design Engineer with System design team in development of hardware products from requirement analysis to system study, digital circuit design, high speed multilayer board More
Telematics & Tracking--Projecr Description of the project. The product family of telematics devices to incorporate cellular, satellite, global positioning system, Wi-Fi, OBD and vehicle area network wireless techno More