Freelancer logo How It Works Browse Jobs
Log In Sign Up
Post a Project
Profile cover photo
You're now following
Error following user.
This user does not allow users to follow them.
You are already following this user.
Your membership plan only allows 0 follows. Upgrade here.
Successfully unfollowed
Error unfollowing user.
You have successfully recommended
Error recommending user.
Something went wrong. Please refresh the page and try again.
Email successfully verified.
User Avatar
$30 USD / hour
Flag of TURKEY
gursu, turkey
$30 USD / hour
It's currently 8:13 AM here
Joined September 29, 2017
0 Recommendations

Bahtiyar B.

@ElektroNeo

verified-v2.svg
 5.0 (7 reviews)
5.0
5.0
100%
100%
$30 USD / hour
Flag of TURKEY
gursu, turkey
$30 USD / hour
100%
Jobs Completed
100%
On Budget
100%
On Time
10%
Repeat Hire Rate

Embedded System Developer | PCB Designer

Hi. I am an Electronics Engineer with +5 years of experience in Embedded Firmware and Embedded Systems. ✔ I know C/C++ programming language, especially for embedded firmware. ✔ I can make PCB designs with KiCAD, Eagle, Proteus, EasyEDA, and Altium Designer. ✔ I can make a project with STM32 (STM32CubeIDE), PIC12/16/18/24 (MPLAB X IDE), ESP32 (ESP-IDF or Arduino), ESP8266 (PlatformIO), RP2040(Python or C SDK) and Atmel Microcontrollers (Microchip Studio), Nuvoton (NuEclipse). ✔ I can make simulations with LTspice, Logisim Evolution, and Proteus. ✔ I can make GUI with a Nextion or .NET Framework, ✔ I can rapidly prototype your embedded system. ✔ I can do Arduino programming. ✔ I used these things in my previous projects: UART, I2C, SPI, DMA, ADC, DAC, PWM, EEPROM, MPU6050, BMP180/280, ADXL345, HC-SR04, Joystick, L86 GPS, 7SD, Nokia 5110 Display, LCD Display, Nextion Display, DS1307+, RS485, PCA9685 PWM Module, BLDC Motor Control, BNO055 MPU, Step Motor Control, Servo Motor Control, NRF24L01, NTC Thermistor, HX711 Load Cell.
Freelancer Electronics Engineers Turkey
See all Electronics Engineers in Turkey

Contact Bahtiyar B. about your job

Log in to discuss any details over chat.

Portfolio

10900259
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
10720168
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
10720146
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
10720122
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
10720107
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
9747894
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
10900259
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
LED Animation Project
This is a project that I made for a company. It includes both PCB Design, Firmware, and Mechanical Design of the enclosure.
LED Animation Project
10720168
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
In this project, there is 1 server and multiple client boards. I used an STM32 microcontroller for the server and ESP32 for the client boards. Client boards can be of different types. They can configure via Nextion display. Clients will get data from the sensors and send them to the server when needed. The server has SD Card and it can save data that comes from the client to the SD Card. When the server board will connect to the PC it will send saved data to the PC and then it will get data from the clients and send them directly to the PC. On the PC the app will save those data to an Excel file. Both client-to-server and server-to-PC communications are done with a TCP/IP.
TCP/IP Project
10720146
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
I made a GUI and controller firmware for the narrow webbing cutting machine. GUI made for the Nextion display. In Nextion, you can select different webbing types and cutting length types. For the controller, I used the STM32 module. It communicates with the Nextionand makes commands for the motors. You can cut up to 4 bands of webbing in this machine.
Narrow Webbing Cutting Machine - Firmware and GUI
10720122
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
I can make a machine that can test the strength and elongation of the textile or alternatives. I made mechanical design, circuit design, GUI, and controller firmware. I used ESP32 for the controller.
Tensile Testing Machine
10720107
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
I can make designs for Nextion Displays using Inkscape.
Nextion Designs
9747894
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application
Adjustable Neural Stimulator System with Android Application

Reviews

Changes saved
Showing 1 - 5 out of 7 reviews
Filter reviews by:
5.0
$500.00 USD
Arduino Firmware for VFD Motor Driver Control
Bahtiyar did great work on my electrical , nextion, vfd motor control project, he designed everything gave full schematic, wrote all the code and was quick and efficient, i would recommend and will likely work with him again. Very please. Thanks again Bahtiyar
Electronics
Microcontroller
PCB Layout
Arduino
+1 more
User Avatar
Flag of David S.
@Steelwerkz
•
6 months ago
5.0
€180.00 EUR
Bluetooth project using ESP32 with ESP-IDF
very quick and focused on the project .
Electronics
Microcontroller
PCB Layout
Arduino
+1 more
User Avatar
Flag of Avensys Srl R.
@energa
•
8 months ago
5.0
$112.00 CAD
STM32 Project
Amazing job done by the guy. I knowledgeable and knows what he is doing. Would hire again.
Electronics
Microcontroller
PCB Layout
Arduino
+1 more
G
Flag of Rishabh G.
@ghtu597
•
9 months ago
5.0
$80.00 USD
Arduino project - simple circut with switch. Experienced person needed. For a heat pad project (heated clothing)
Great job. Nice to work with you.
Electronics
Microcontroller
Electrical Engineering
PCB Layout
Arduino
User Avatar
Flag of Madaco M.
@madasl
•
1 year ago
5.0
$3,550.00 AUD
IOS app and PCB Firmware
Was fantastic, will ask him to work on our next project
Electronics
Microcontroller
Software Architecture
Electrical Engineering
PCB Layout
+4 more
User Avatar
Flag of Craig L.
@kiwioz
•
2 years ago

Education

Bachelor Degree

Bursa Technical University, Turkey 2016 - 2022
(6 years)

Qualifications

Professional Certificate

ICAT'20 (International Conference on Advanced Technologies)
2020
I did "Adjustable Neural Stimulator System with Android Application" project.

Scientific Computing with Python

freeCodeCamp
2020
Verify: https://www.freecodecamp.org/certification/elektroneo/scientific-computing-with-python-v7

Contact Bahtiyar B. about your job

Log in to discuss any details over chat.

Verifications

Preferred Freelancer
Identity Verified
Payment Verified
Phone Verified
Email Verified
Facebook Connected

Certifications

preferredfreelancer-1.png Preferred Freelancer Program SLA 1 94%

Top Skills

Electronics 6
Microcontroller 6
PCB Layout 5
Arduino 4
Firmware 4

Browse Similar Freelancers

Electronics Engineers in Turkey
Electronics Engineers
Microcontroller Developers
PCB Layout Designers

Browse Similar Showcases

Electronics
Microcontroller
PCB Layout
Arduino
Previous User Next User
Invite sent successfully!
Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Freelancer logo Singapore / English Help & Support Freelancer Categories Projects Contests Freelancers Enterprise Membership Preferred Freelancer Program Project Management Local Jobs Photo Anywhere Showcase API for Developers Get Verified Desktop App About About us How it Works Security Investor Sitemap Stories News Team Awards Press Releases Careers Terms Privacy Policy Terms and Conditions Copyright Policy Code of Conduct Fees and Charges Partners Escrow.com Loadshift Warrior Forum Apps Apple App Store logoGoogle Play logo
Copy to clipboard failed, please try again after adjusting your permissions.
Copied to clipboard.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.