Find Jobs
Hire Freelancers

PCB Design, Component Selection, Software Development, Prototype and testing

$1500-3000 USD

Closed
Posted over 5 years ago

$1500-3000 USD

Paid on delivery
I'm looking for a circular PCB to be designed as-well as components selected and software developed to work with the components on the custom pcb. The end-device will make use of a biometric fingerprint sensor module. At end of the job you will present a PCB design with all relevant files needed for manufacturing, selected components compatible with PCB and components able to achieve end goal, develop software to run on the end-device that will function as required.
Project ID: 17297254

About the project

39 proposals
Remote project
Active 6 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
39 freelancers are bidding on average $2,313 USD for this job
User Avatar
Hi I am experienced electronics engineer with more than 8 years of experience. I have completed a number of projects on PCB design. Please get in touch I can deliver you complete design. I am waiting for your reply to start Regards
$2,800 USD in 30 days
4.9 (260 reviews)
8.0
8.0
User Avatar
Hi, I am electronic engineer. I have worked over 6 years on embedded systems. I can prepare 2 working prototypes for the project. All the BEST, Ali SERBETCI
$2,500 USD in 45 days
5.0 (37 reviews)
6.6
6.6
User Avatar
Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded design & programming using pic, dspic controllers and MATLAB codding for Power projects, Boot loaders, Bluetooth & GPS designs,CAN communication, EEprom. UART , RF circuits ,Protocols for networking, wi-Fi routers,OBD diagnosis with CAN bus protocols, Electrical vehicles and AC drives, stepper motor controls. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, 5kW motor controller for EV,synchronous rectifiers, Solar MPPT chargers, Solar trackers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion.
$3,000 USD in 50 days
4.9 (61 reviews)
6.8
6.8
User Avatar
Hi there..... Warm Greetings We came along with your request for PCB Design, Component Selection, Software Development, Prototype and testing and we reviewed your project description. We'd like to help you with confidence and satisfying results... We have professionals working here with 100% results and more creative and renovative ideas for our clients ! We have worked on several similar projects before! We are offering our services for more than 5 years in the field of Electrical Engineering, Electronics, Microcontroller, PCB Layout, Software Architecture We have worked on 350+ Projects. Please check the profile reviews Feel free to message us to discuss briefly about your project !
$2,500 USD in 30 days
4.9 (69 reviews)
6.6
6.6
User Avatar
Hi Sir, We have read briefs of your project and give you complete solution including pcb designs and manufacturing, programming devices, app developments and software developments, complete end to end testing and sending the ready product to your door steps. We are professional engineers and developers who do such projects from the last eight years. We offer you our skills for this project at very low rates comparatively without compromising the quality of work. Let me introduce you to our company TURKTRONICS. We are TURKTRONICS. We are professionals with 8+ years of experience in Circuit designs, PCB designs, embedded system solutions, mobile app development, programming and software development. We provide complete end to end solutions for all kind of development projects. IOT is our strong point. In this bid, prototyping and shipping cost is not included however paying extra slight of money to include prototypes. We have the manufacturing facility and we produce the very high standard PCB boards and send ready products to customers doorsteps via DHL. We care about our clients and help them to get out of any potential problem throughout the projects and also give post completion technical support if ever required. We are very much looking forward to hear from you on this in coming days! Cheers!!! Ahmad Lead Technical Engineer TURKTRONICS An Internet of Things Company !
$1,500 USD in 21 days
4.8 (55 reviews)
6.9
6.9
User Avatar
Hi There, We at I-TECH offer Prototyping of electronic devices. We will design, prototype and ship the fingerprint scaner based hardware. Please feel free to contact us. Best Regards, Shahbaz.
$3,000 USD in 45 days
4.6 (64 reviews)
7.0
7.0
User Avatar
Hi good day very high skill in RF Senior ENGINEER has more of 40 years’ experience in this profession, developing Hardware and Software Expertise in video processing and associated simulation and evaluation tools and methods, communication I2C, I2S, SATA, RS232, RS422, RS485, USB, TCP, Bluetooth, RF433, Wi-fi, GSM, GPS, GPRS and any other serial communication. Producing Analog/Digital board designs, layouts and modifications or any other multi-layer PCB design, Verifying designs and layouts. Preparing documentation for manufacturing. Gerber, contact with partner in China for make PCB in 32 layers Develop Digital/Analogue electronic board architecture and design by developing product concept; Researching, analyzing, selecting, and applying design concepts, approaches, techniques, and criteria; Adapting and modifying board design alternative architectures; developing and evaluating new analogue/digital architectures and algorithms; defining functionality and requirement specifications. Developing board layout including 3D model, size, performance, power consumption, and cost. Establishing integrations; preparing drawings, schematics, diagrams and Gerber’s . Collaborating with Related board design teams; evaluating components, materials, and suppliers; Identifying and resolving design integration/interface issues thermal problem Determining and establishing design specifications and safety standards.
$2,500 USD in 10 days
4.9 (53 reviews)
6.5
6.5
User Avatar
Dear Sir, I am an electrical engineer with 19 years experience in this area . I am interested in your project : PCB Design, Component Selection, Software Development, Prototype and testing Please send a private chat message.
$1,500 USD in 30 days
4.6 (46 reviews)
6.9
6.9
User Avatar
Hello, I have understood the project details provided , but need to clear few things. So can you please press Chat button to send a text message whenever you have time to discuss. Now I am putting a placeholder bid as the amount field is mandatory to submit this proposal. Thanks & Regards Hire Tech Experts
$2,500 USD in 10 days
5.0 (5 reviews)
6.0
6.0
User Avatar
Dear Valued Employer, My name is Martin Botsov and I am an engineering physicist with extensive experience in the field of circuit design, circuit prototyping and PCB design. As I understand from the project description you are looking for an electronics engineer capable of designing a PCB according to all stated requirements. So, without further ado here's how the workflow would look like, if you happen to choose me as a partner for your project: 1. Initial discussion 2. Proposal for solution 3. Block diagram of proposed solution 4. Schematic drafts based on proposed solution 5. Component library creation 5.1 Schematic symbol library creation 5.2 Footprint library creation 6. Schematic drawings 7. Review of schematic drawings 8. Layout design 8.1 Components placement and arrangement 8.2 Components routing 8.3 Review of final layout design 9. Design rule check 10. Final check, verification and validation 11. Production files (GERBER, NC DRILL, ASM, PICK & PLACE, STEP, BOM, SCH, 2D mechanical) Your project will be carried out on Altium Designer and Autodesk Inventor. Delivery term could be further negotiated once I start working on the project. Don't hesitate to contact me with questions regarding any details around your project. You could also check out my profile on Freelancer and LinkedIn for more details around my professional experience. I am looking forward to hearing from you soon. Thank you for you time. Kind Regards Martin Botsov
$1,670 USD in 42 days
5.0 (17 reviews)
5.6
5.6
User Avatar
Hello... I am Carlos... Computer Science Engineer with about 20 years of experience in microcontroller software projects (C, C++, Assembler in PICs, ATMEL, STM32 and Arduino), Windows PC software (C, C++, Qt) and extensive hardware experience (digital circuit design, testing and debug). Knowledge on robotics, drones and RC (Remote Controlled) gear. Working as freelancer designing electronic things, including all steps (from concept, to final product. Including but not limited to circuit design, PCB design, software/firmware, UI design, writing, debug, etc.). I can help you with your design/development. Please give me more information about the device you need to develop. Hope to know soon from you.
$2,222 USD in 30 days
5.0 (2 reviews)
5.1
5.1
User Avatar
Hello! We are experienced team of engineers, CAD designers and writers with hundreds of reviews on this website. We have all the required skills and we have done hundreds of similar projects before. We would love to work with you on this project, please reply back to discuss further. Thank you!
$3,000 USD in 30 days
4.9 (11 reviews)
4.8
4.8
User Avatar
Hi, I can develop this device. I have 12 years of experience. I can provide firmware,PCB filed for manufacturing,BOM of components used. Can discuss further to understand more. Thanks Senthil India
$2,500 USD in 40 days
5.0 (11 reviews)
4.8
4.8
User Avatar
Hi! I am Jordan, new one on Freelancer , a CE products and Disney & Marvel characters toys designer from China. I have over 10 years of experiences in products design( hardware and mechanism), molding and assembly. I have good knowledge of material, artwork and electronics and have good relationship with local design house and core components vendors. i have my team and studio in Shenzhen. In past 2 years, i designed bluetooth anti-drop device and kid’s watch for european customer and baby thermometer for local company. I help my customers from product concept to mass production. I am interested in your project and confident that i could meet your requirements. Looking forward to your reply!
$2,500 USD in 30 days
4.6 (7 reviews)
5.0
5.0
User Avatar
SOLACE Engineers Inc. is an engineering solutions' company working in various fields of engineering. We have performed many projects on various freelancing platforms and have experienced engineers to get your tasks done within time with quality and affordable price! We have great skills and expertise in the area of Embedded System. In Embedded System Solutions we provide services like embedded systems designing, prototyping & manufacturing, analog and digital electronic circuits designing & manufacturing, PCB designing, schematic designing, BOM management & sourcing, Embedded C/C++ coding of micro-controllers and producing finished consumer products. We are highly proficient in Altium, Proteus, Eagle, OrCAD, MPLAB, MultiSIM, PICC-CCS, Arduino, XBee, Raspberry Pi, GPS, GSM, RFID, BLE, DC Motors and the list goes on. IoT development is also one of our main solutions. In addition to this, we also provide research & development facilities, technical articles and research papers, CDR, CER, assignments, guidance, and consultancy in the field of electronics engineering and embedded systems. We also have skills and expertise in the areas of Product development and production; Renewable Energy (especially Solar System); IT & Networking Systems; Software development; Business Management; Writing & Documentation (Technical, Engineering, Business), etc.
$2,500 USD in 45 days
4.4 (5 reviews)
4.8
4.8
User Avatar
Hi johnsnow95, I have gone through your project "PCB Design, Component Selection, Software Development, Prototype and testing" and I am ready to work with you on this job. I can guarantee you one thing that is the quality of work. Relevant Skills and Experience I have 10+ years of experience in Electrical Engineering, Electronics, Microcontroller, PCB Layout, Software Architecture I can do this within your budget too $1500 - $3000 USD Looking forward to hear from you, Thanks, I'm looking for a circular PCB to be designed as-well as components selected and software developed to work with
$2,100 USD in 36 days
5.0 (5 reviews)
4.0
4.0
User Avatar
Yes buddy,,,how r u?just give me 15% of it and i will deliver it in ur country. Its not an expensive project. U will feel brotherhood...............................
$1,500 USD in 30 days
4.6 (30 reviews)
4.1
4.1
User Avatar
Hi. I am an electrical engineer with experience in the design and implementation of circuits in PCB, making circuits of power electronics, control electronics and intelligent systems using WiFi modules (ESP8266), microcontrollers (Arduino and Raspberry) applying graphical interfaces with programs such as Sublime Text , Labview and MATLAB GUI. I have designed circuits for power converters (AC / DC, AC / AC, DC / AC, DC / DC) as subsystems for circuits in Variable Frequency Drives, UPS, and intelligent systems such as intelligent light switch, smart plug, LED control Smart RGB, using softwares like proteus for simulation, and altium and EasyEDA for PCB design. I hope to meet your expectations and be able to work with you on this project.
$1,500 USD in 1 day
5.0 (5 reviews)
3.4
3.4
User Avatar
Hi, Please provide moe details of the project like the functional requirements, dimensions, specifications like mains powered, battery powered, connectivity, storange, etc, Look forward to hear from you. Thanks, MIlind
$3,000 USD in 60 days
5.0 (1 review)
2.6
2.6
User Avatar
hi... we can design your project in Altium Designer.. we ll provide to you schematics, PCB, BOM and gerber files and what you need we are interesting your project, pls give me more details.. thanks..
$2,500 USD in 45 days
4.9 (4 reviews)
2.7
2.7

About the client

Flag of UNITED STATES
United States
0.0
0
Member since Jul 3, 2018

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.