Find Jobs
Hire Freelancers

Design and Development of an electronic device for motorcycles.

€3000-5000 EUR

Closed
Posted about 5 years ago

€3000-5000 EUR

Paid on delivery
My name is Beatriz Martín, and I'm COO of LiveLink, a Startup in which we are developing an IoT device for motorcycles. It can detect any accident suffered in a motorcycle and warning the emergency services with the location and medical information of the victim. Currently, we are developing out third prototype of the first product we will launch o the market and we already have agreements with national institutions in order to carry out a pilot project.
Project ID: 18507543

About the project

22 proposals
Remote project
Active 5 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
22 freelancers are bidding on average €4,149 EUR for this job
User Avatar
How are you? I am a senior embedded hardware and software engineer who has 7+ years of experience in circuit and PCB design, firmware programming and mobile app developement. I have develoeped one similar project that is called as a multi-sensor board. This multi-sensor board have wifi module (like esp32, esp8266) and also contains temperature and humidity sensor, water PH and level sensor and other relays. This multi-sensor board is controlled by desktop app via wifi. Regarding your project I can implement all requirements. - Hardware configuration (ligth control, Temp/Humidity control, High Pressure pump, Water PH and level monitor and Camera) - Software choice that is firmware developement on the custom-designed board. We can use ESP32 module that is the wifi based microncontroller. And ardiuno IDE is the software environment. - Mobile app application I can develope the simple app that can connect the device. I have done some similar mobile android app like GPS tracker app and mobile children care app. - Manufacturing connections I know several kinds of PCB factory and manufacture company and keep connection from Shenzhen, China. I can easily manufacture the device after we designed. Thank you Alexander
€4,444 EUR in 30 days
4.9 (22 reviews)
7.2
7.2
User Avatar
I am embedded system electronics engineer and iot geek. The most related product i have worked on is women saftety device, on which, if women press the button, her location is shared with her family members and it starts recording audio to a cloud server utomatically, while at the same time it calls nearest police station automatically. I have also worked on home/building automation with indoor positioning system, smart hydroponics system, etc. Please consider sending me a message so that we can discuss this further
€3,000 EUR in 30 days
5.0 (17 reviews)
6.7
6.7
User Avatar
Hello, I am Anthony from Sri lanka. We are a hardware designing & prototyping company. Why you should hire me ? - I have seven years of experience in the field and have developed many systems. - I have state of the art testing lab and PCB fabrication workshop. - We have DLP & FDM 3D printing, - I have many contacts in China. I can help you with mass producing this. Please contact me if you are interested. Thank you Anthony
€3,333 EUR in 30 days
4.8 (56 reviews)
6.4
6.4
User Avatar
hello i am a computer engineer,i have masters in computer engineering,i have experience for more than 7 years in arduino and electronics i have made something similat to a startup project here,but unfortunately thet did not launch it
€3,000 EUR in 30 days
5.0 (31 reviews)
5.7
5.7
User Avatar
Hi, I have been working on embedded systems software for more than ten years. I have involved in several projects from UAVs to gps tracking devices. If you want we can discuss details.
€4,000 EUR in 30 days
5.0 (15 reviews)
5.2
5.2
User Avatar
Hello, I am very familiar with this project because i have full experiences with EE design and development, IoT device. As an expert, i am sure i can handle this project successfully on time. I hope you are going well and to discuss in more detail with you. Regards, Chunyan Y.
€5,000 EUR in 30 days
5.0 (6 reviews)
4.2
4.2
User Avatar
Hello thanks for making this job application available. We are hardware Research & Development team of 4 from Croatia. Over the last 6 years, we have worked on over 30 projects that include professional R&D of hardware. In our team, we have covered all positions & know-how needed in order to get product from the idea stage to the manufacturing stage. We are very open and looking forward to an opportunity to discuss this project with you in more details. Best regards David Zovko
€5,000 EUR in 30 days
4.8 (3 reviews)
4.3
4.3
User Avatar
Hey Martin, amazing proposal and I am happy to take part in your project, all UDTech engineering team to your services. It's rather difficult to preapre estimation without system operational description, could you please send it for review too? Thanks you in advance
€4,000 EUR in 20 days
5.0 (2 reviews)
4.3
4.3
User Avatar
hello,how are you. i read your bid carefully. i am fpga, vhdl, arduino, pci expert and have full experience for 10 years. also c/c++ language is my top skill and i can handle your project fully. i can provide most quality and high speed. if you want to success, please contact me. Then, I will give you good result to the proposals. hire me.
€4,000 EUR in 30 days
5.0 (1 review)
3.9
3.9
User Avatar
Hi. I’m developing electrical devices , embedded software and service programming. I have designed several devices and have a lot of experience with Accelerator Sensor ,PIC,AVR ,WiFi,BLE, ARM processors, Raspberry Pi, and Arduino Especially I have accumulated a lot of experience from the prototype design of various hardware device. You could realize your idea at a time , I can guarantee high quality of results. Regards.
€4,444 EUR in 30 days
4.1 (5 reviews)
3.2
3.2
User Avatar
Hi. Thanks for your posting. I am an electronic engineer, having enough experience in IOT device, high speed circuit & PCB design. I am sure I can support you with my skills. Following is my skills and tools - Electrical & electronic diagram, and schematic & PCB design. • High circuit analysis and design such as DDR3, eMMC, 10Gbps Ethernet circuit • RF Antenna/Front end, filter. • Flexible PCB inlay design. design(Up to 12 layers PCB design). - Standardization and protocols • FCC, ISO/IEC 14443, ISO/IEC 18092, ISO 18000 • ISO IEC 7816, ISO/IEC 7815 - Firmware development for any MCU. • ARM Cortex Mxx, STM32xx, ATSAME70, AT91SAM, STC. • AVR: ATmega328, ATmega1280, ATmega2560, ATtiny43U, ATtiny85... • PIC: PIC16, 18, 24, 32 series • Raspberry Pi • Arduino series: arduino Uno, Mega2560 • Standalone RF module such as Nordic series, WiFi(ESP32, ESP8266) , BLE, Zigbee, Xbee Design Tools - Altium Designer 18, Cadsoft Eagle PADs, OrCAD - MPLAB X, Micro C, uKeil, STM32 workbench, AVR Studio. Arduino IDE - C, C++. I can give you a perfect project. Best Regards.
€4,500 EUR in 20 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, I'm experienced embedded firmware and hardware developer. I specialize in wireless communication (BLE, WIFI, 3g/4g, LoraWAN, Sigfox, Zigbee, Z-Wave) hardware and firmware. I can design the boards and code drivers and business logic in embedded C. Recently I've developed fully certified Sigfox based IoT product for another customer so I'm familiar with the whole development flow. I also routinely use 3/4g modems from Quectel and Simcomm in my designs. Let's talk more about your requirements to see how I can help. I'm experienced in PCB design. I can draw this in EagleCAD and produce Gerber files for fab of your choice. I can also assemble a few prototypes and write firmware for them. I am also an expert in miniaturization, you can meet for my portfolio and Smablo project I've done designs that were mass produced for examples see Smablo project in my portfolio. All Smablo components were mass produced based on my design and assembly documentation As a part of my usual services I provide complete mechanical documentation of the design including 3d model of assembled board. As for PCB design this is a part of my service package. In my experience spiting project between drawing schematics and routing boards leads to subpar results. I provide the following: * establishing project specification * selection of components * electrical schematics * PCB layout and Gerber files for the fab of your choice * assembly documentation * 3d model of assembled board
€4,444 EUR in 30 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have 20 years of experience analog rf and digital circuit design, embedded systems and firmware software design. I had worked on many iot projects. One example sending real time gps location data to a web server and showing it on a web page. The data sent over gprs network. I can do this project over 3G, over 4G or over gprs network. I can guess that the production cost for 1K device will be below 10USD for one pcs for gprs network version.
€5,000 EUR in 30 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi Beatriz, We are expert team in IOT based devices. We have done work based on connected devices where oour expertise is on hardware and firmware/software development. Please visit us at www.aritron.com. I have few queries - 1. How alarm/accident condition is detected in motor bike ? 2. What kind of connectivity medium IOT device use like 2G/3G/4G ? Yes, does it support fallback like 4G to 3G or 2G ? 3. How the device is powered on ? 4. Is the device support OAT firmware upgrade ? 5. How the device is configured ? 6. What hardware this device is based on ? Thanks, Saurabh
€4,444 EUR in 30 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, I have read the details and I understand what you really looking for. Well, my name is Harry, I belong to a group of companies known as JOLTA Technology International. The head quarter is in Hong Kong and we do have offices in Dubai, China, Malaysia, Taiwan and Pakistan. We have more than 1300 employees including top rated PHD and Master Level Engineers,,designers and quality assurance experts. We will engage a team for your project to ensure its quality is as per your demand. It will be done on the given time frame. We can also help you manufacture the pcb itself with shipping world wide. We have our own plants in china and hong kong where we have best R&D specialists having more than 40 years of experience in this industry. We can assist in mass production as well. We as an organization know the importance of the projects and our clients. We are looking for a long term business relationship. I would love to share our work with you in private chat. Please do get in touch with us so we can discuss this further. and take it to the next level. Looking forward to hearing from you soon. Regards, Harry
€3,500 EUR in 45 days
0.0 (0 reviews)
0.0
0.0
User Avatar
i am four year experienced embedded developer, i have done many projects like iot projects, i am experienced in microcontrollers like pic,arm,arduino, atmel,atmega328p etc and c programming. used tools like orcad capture ,mp lab, avr, arduino, keil, etc. communications lilke uart, i2c,spi, wifi,bluetooth, rf etc. moudules like esp8266, lcd,glcd,gsm,eeprom,various sensors etc.
€4,444 EUR in 30 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Explain the additional features need to be added to the original prototype and I’ll do the rest. Thanks.
€4,555 EUR in 30 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of SPAIN
Alcalá de Guadaira, Spain
0.0
0
Member since Jan 11, 2019

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.