Find Jobs
Hire Freelancers

Design a battery charger schematic using TI BQ24232 IC inclusive of PCB design on Altium

$30-250 AUD

In Progress
Posted over 4 years ago

$30-250 AUD

Paid on delivery
This battery charger has to be designed with a TI BQ24232 IC, [login to view URL] It must be designed to charge the following battery safely, [login to view URL] The charger can only have a single micro usb input to charge the battery as well as power a circuit consisting of a MCU and an e-paper module screen.
Project ID: 20837749

About the project

18 proposals
Remote project
Active 5 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
18 freelancers are bidding on average $154 AUD for this job
User Avatar
Hi, I hope you are doing well. I have expertise in PCB designing using Eagle CAD. I have designed several battery monitoring system. Please send me message for further discussion. Looking Forward, Khawaja
$250 AUD in 7 days
4.8 (86 reviews)
6.8
6.8
User Avatar
I have over 35 years experience as an electronic design engineer, please see my profile for more details I have implemented many designs using the BQ2407 IC which is almost identical to the BQ24232 IC that you want to use. Since the battery you want to use has lots of safety features built in then it will only be necessary to set the correct charging level. However if you require I could add extra circuitry to stop any problems if the battery was connected the wrong way around. If you think I can help then please send me further details Best Regards Dave Lelievre
$250 AUD in 7 days
4.9 (28 reviews)
6.3
6.3
User Avatar
hello i am a computer engineer,i have masters in computer engineering,i have experience for more than 8 years in arduino and electronics,i have read ur description ans i can make the required design in just 2 days and i can start immed
$150 AUD in 2 days
5.0 (32 reviews)
5.4
5.4
User Avatar
Hello I am an Electrical Engineer did MS in Electrical Engineering (Control System) as well. I have 4 years of Experience as well, also have 11 IEEE conference publications and 3 Journals with good impact factor. My major Expertise are: - MATLAB, SIMULINK modelling and simulation in Electrical and Electronics Engineering. - AutoCAD, Multisim, Eagle, Proteus, C/C++, Circuit designing, Engineering Mathematics and other Electrical Engineering subjects. - Professional PCB Designing using Eagle and Altium and also Prototyping. - Plagiarism removal, Research paper writing, Academic writing, Technical Writing. - VHDL/Verilog HDL, Xilinx, and FPGA. - Data Entry, Ms. Office, PDF conversion, pdf editing, copy typing etc. - All kind of Engineering Mathematics will provide - Professional solution - 100 % Satisfaction - In time and Budget - Professional Agreements - Can ship products in low cost Kindly check my portfolio and inbox me to discuss it further.
$140 AUD in 7 days
4.8 (37 reviews)
4.9
4.9
User Avatar
Dear, Client. I would like to say this is my fortune to show you my hardware skills. I can bring your idea to live and you can reach the goal absolutely with me. I have 10+ years experience in hardware design (schematic design, PCB design...). My develop tool is Altium Designer, CADENCE. I have designed many high speed devices in embedded system. My recent design is AM5728 Core Board. (quad-core, 1.5GHz, DDR3 4G, EMMC 32G, Gigaethernet, usb3.0,...). And another is PCIe v2.0 to 4x Ethernet (or 4x usb3.1) convertor. All design is passed in several EMC tests. I have designed MEMS tracking board, ultrasonic distance measurement and so on. My design is very stable in industrial environments. I think your design is not difficult. but the most important thing is EMI, EMC. I have been working main hardware developer in large scale industry product company. Designing the PRODUCT is very different from designing the general PCB (test board, kit,...) You can feel everything that is my real skills in hardware development. Look forward to working with you for a long time. Thanks! Hope to see you soon
$140 AUD in 2 days
4.8 (14 reviews)
4.7
4.7
User Avatar
Hello, i have read the details provided..please contact me to discuss more on the project deadline and some other few things
$150 AUD in 7 days
4.2 (12 reviews)
4.7
4.7
User Avatar
Hello, I am Arun Prakaash Murugesan, PCB Designer from India. I have 3 years experience in PCB Designing. 8 will design PCB with 3D models and professional BOM in Altium designer software. I can help you to make a charger for your battery using that ic you given. Can we discuss more detail in chat. Cheers, Arun.
$150 AUD in 3 days
5.0 (12 reviews)
4.1
4.1
User Avatar
Hello Sir I am a Mechatronics engineer and I have a lot of experience dealing with these things. I will definitely deliver your work on time and I will be pleased to do your project in a reasonable budget. Thank you
$150 AUD in 3 days
5.0 (12 reviews)
4.0
4.0
User Avatar
hi, if you can compromise about designing tool i can finish your board in 4 days ..i will be using KiCad as the tool for designing..
$140 AUD in 5 days
4.9 (9 reviews)
4.1
4.1
User Avatar
Yes Buddy, Its me imad, Working on 50+ platforms and a solo developer, Will give u a design and if possible in just 35$ extra budget to ship u the designed PCB, U will feel brotherhood,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
$70 AUD in 7 days
4.5 (28 reviews)
4.1
4.1
User Avatar
Hi guys Down Under, I am and Electrical Engineer and a PCB Designer using Altium, based in NYC. Just completed a VERY similar design at work. Reading what you need here, I can use my existing design with some changes. Thus I bid low because quite a bit of the PCB already exists. Best, Sunil NYC
$90 AUD in 5 days
5.0 (1 review)
1.8
1.8
User Avatar
I have experience in Battery Charging Circuits. I have worked in this field. Let's have a chat to discuss further.
$130 AUD in 8 days
5.0 (1 review)
0.2
0.2
User Avatar
Dear Prospect Hiring Manager. Thank you for giving me a chance to bid on your project. i am a serious bidder here and i have already worked on a similar project before and can deliver as u have mentioned "I can do this job and give you an efficient job that will be very acceptable and presentable. I and my team work on web development and mobile apps and I can assure you that you will never be disappointed"
$175 AUD in 7 days
0.0 (1 review)
0.0
0.0
User Avatar
Dear Sir. I have just read your project and I’m absolutely sure I could do this project without any problem. I am having 14+ years of rich experience in circuit sketch and PCB design. I've designed a lot of PCB projects and realized it. Particularly, I have ever done the job like this as you want. I'm sure I can complete your project on time with high quality. I will work hard and hard for complete your project successfully. Looking forward to your good response. Best regards,
$140 AUD in 5 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi there, I can help you in this project in less than 2 days. Kindly bid me so that I can get in touch with you. I have already made schematic for your purpose. Regards, Electrical Engineer Aleem Ahmed.
$120 AUD in 2 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Let me do it. If you want to get the best results, work with me. I can complete your project in only one week. Regards, Mr. Linh
$240 AUD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I create testing prototype for electronic testers for PCB and design another electronic circuits. This circuits should be design another circuits.
$140 AUD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I am well interested to do this project. I am well to do in this pcb project. I can do the best that i can do for the schematic project. bid me as the best that i can do for you.
$140 AUD in 7 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of AUSTRALIA
Singapore, Australia
4.4
8
Payment method verified
Member since Aug 12, 2017

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.