Find Jobs
Hire Freelancers

PCB designer needed with experience in mixed signal designing

$15-25 USD / hour

Closed
Posted over 5 years ago

$15-25 USD / hour

Hi, We are looking for a pcb designer who should have good knowledge on mixed signal pcb designing, analog circuit designing and multi layer pcb designing. Submit your proposal with your previous experience. Details of the project will be shared to the concerned freelancer who got selected.
Project ID: 17779367

About the project

25 proposals
Remote project
Active 5 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
25 freelancers are bidding on average $22 USD/hour for this job
User Avatar
Dear Sir, I am an highly skilled board designer who has over 17 years experience on complex, multi layers PCB design. I can provide you with service from schematic entry to PCB Layout.I can also provide the prototype service. In my portfolios, there are some prototype boards which were from concept to final prototype. You may also refer to the testimonials of clients. Please message me if you are interested or want to learn more. We can discuss further. EDA Tools: Altium17, Pads, Orcad, Eagle8.. Thanks
$33 USD in 30 days
4.9 (118 reviews)
8.5
8.5
User Avatar
Hello. I'm an electronics engineer , PCB designer. I'm experienced in the analog/digital circuits layout, high speed interfaces design, switching / linear power supply. Experienced with multi layer /single layer rigid and rigid-flex PCB. Please share more details about your project. I'm would like to help You can contact with me in chat. Viktor
$20 USD in 40 days
4.9 (217 reviews)
7.7
7.7
User Avatar
Hello! How are you?! I am an experienced electronic pcb design engineer with 8 years of experience. Several of my projects you can find if you check my profile. Send me a message with your detailed requirements. I am here whenever you send the message! Have a great day!
$22 USD in 50 days
5.0 (95 reviews)
7.4
7.4
User Avatar
Hello, We are a design team include 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, Software and +5 years experience of 3D mode (3D print, CNC and molds). Our key skills are IoT, Embedded KIT, Digital & Analog, High-speed, Memory, WIFI, GPRS, GPS, RF, BLE... We have designed up to 26 layers PCB. Experience designing high density boards include FPGA, Flash, DDR, PCIE, SATA, Ethernet, BLE, WIFI, HDMI, USB, QSFP, LVDS...etc. Also, we provide FAB, ASSEMBLY & TEST services. We can make any prototypes, even support mass production. We use the expertise of the following software: - Allegro/Orcad - Altium. - Eagle - Mentor Pads. - Expedition - Solidworks/ Autocad. - C/C++ - Android, IOS... We provide Service & Support even after completion of the projects,when ever necessary. Please contact me & we can discuss more. Best Regards, BK Technology
$20 USD in 35 days
5.0 (30 reviews)
6.8
6.8
User Avatar
Hi, The one thing we have concern about mixed signals PCB is separate analog ground and digital ground. they have to be separated and just connected on one small point jus for reference. will be good if we use more than 2 layer(4 layer at least). because we can create one layer as reference ground to all signal. it can reduce noise propperly as it have a lot of area. I have been designing PCB since 2012 and have designed a lot of PCB for various kind of application from Hobbyst, Robotic, Industrial, IoT, RF, and Military Aerospace application. I have experience in designing critical circuit like SMPS, RF,high speed digital, mixed analog digital, and BGA, also multilayer design. Usually I use Eagle and Kicad. Let's discuss the detail over chat. let's solve your project together . Best Regards, Rijal
$22 USD in 40 days
4.7 (108 reviews)
7.0
7.0
User Avatar
Hi I am interested to your project. I am familiar with electronics, microcontroller as well as PCB design by Eagle. Thanks.
$16 USD in 40 days
4.9 (99 reviews)
6.4
6.4
User Avatar
Hi, I'm very experienced hardware design engineer with 10+ years of design experience (sch and PCB). Please look at list of some of my past designs below. Please let me know if you are interested in cooperation. Best Regards, Michal - 4G LTE UE Unit design based on IMX7 processor and 5W HP PA module, dedicated for military transporters - 2 Low Power Front End Module PCB Designs for 4G LTE Network (1W Design for Band1 and Band3), military application - 2 High Power Front End Module PCB Designs for 4G LTE Network (10W Design for Band1 and Band3), military application - Carrier board design for Remote Radio Unit (FPGA based board with DDR4, 10G Eth, JESD204B, POE) dedicated for industry and safety applications - 10+ prototype projects dedicated for military, flight and industrial applications (12-14 layers boards based on FPGA chips) - 10+ adapter boards dedicated for aerospace and space applications prototyping(12-14 layers HDI boards equipped with FPGA chips and high speed electronics) - PC card dedicated for ASIC chips simulation, prototyping and testing, (20 layers board equipped with 2 Virtex7 FPGAs, 2xSO-DIMM DDR3, PCI-E x8, SATA, USB3.0 interfaces) - PC card dedicated for ASIC chips simulation, prototyping and testing, (20 layers board based on 2 Virtex5 chips, 2xSO-DIMM DDR2, PCI-E x8) - 5 prototypes of high current micro power supply converters dedicated for FPGA applications (4 layers 50mmx50mm boards, 2x up to 8A outputs) - Prototype design of Ethernet to fiber
$25 USD in 40 days
4.9 (32 reviews)
6.5
6.5
User Avatar
Hi. I can design pcbs for you
$22 USD in 10 days
4.7 (64 reviews)
5.9
5.9
User Avatar
Hi Sr, I have the necessary knowledge and experience for making the job that you need. As you can see in my portfolio I've designed high sensitivity ultrasonic boards with high power stage (3kW) in the same board. Now I was working a lot with multi layer boards and all the designs include the 3D models for checking into the enclosure. I design using Altium Designer and when I need to simulate the analgo stages I use Tina-TI from texas instruments. Any question, please feel free to contact me and I can give you some 3D PDFs of my last jobs. Best Regards Eng. Juan M Garin
$25 USD in 20 days
5.0 (20 reviews)
5.5
5.5
User Avatar
I have more than 5 years experience but in embedded and PCB design with digital and analog . so I can do your job within a time limit with your satisfaction.
$25 USD in 30 days
4.8 (8 reviews)
4.9
4.9
User Avatar
Our team has more then 10 years of experience of development of electronic devices (hardware-software production). We are assure that we can develop a prototype of non contact voltage testers according to a tasks and purposes in a fixed terms.
$22 USD in 40 days
5.0 (4 reviews)
4.9
4.9
User Avatar
Master in Engineering, Electrical and Electronic Engineer, who is dynamic, reliable, resourceful, committed and organized with enthusiastic approach to succeed with a pleasant attitude. Possessing excellent analytical skill and good research background. I have successfully completed IELTS with an overall band of 7 and have a good proficiency in English COMPLETED PROJECTS • FM radio. • VHDL Design of an Up/Down Counter. • Design of Up/Down Counter using PIC. • Duck Shooter Program using C. • Pointer movement controller on 2-dimentional axis using C. • LCD display Manipulation projects including: o Text Display o Volt-Meter • Analog to Digital Conversion (8-bit). • Sound to Light Color Organ Design and Development. • Minesweeper Player Creation using PIC. • Simulation of an End to End Communication System with MATLAB. • (BENG Individual Project) (MENG Part A). • (MENG Individual Project) (MENG Part B). • (MENG Group Project).
$22 USD in 4 days
4.7 (12 reviews)
4.4
4.4
User Avatar
I worked mostly in the medical electronic industry. My PCBs are made with extremely attention to details. Relevant Skills and Experience You will have exactly what you want. Please look in my portfolio.
$24 USD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello. I am electronic designer and i have all needed skills for PCB designing in Altium Designer. One of my projects you can see in my portfolio. Ready to discuss all the details.
$16 USD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have experience with circuit design (digital electronics, analog electronics, power supply, RF...), PCB design as well as hardware prototype testing and verification. I am also a full-time hardware engineer, spending most of my time enjoying power supply, mixed signal circuitry, system and PCB design and exploring various PCB (including rigid and flex) and power supply technologies. During the design and development of the power supply, I would keep you up-to-date with the current status of the project. This includes schematic files, 2D and 3D drawings of the module etc. Please feel free to contact me so we can discuss project details.
$15 USD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have many experience. I have many experience.I have many experience. I have many experience. I have many experience.
$16 USD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
hello i will do it with all confidence and project budget as soon as possible. I have experience of more than 18 years and design + 16 layer pcb with microcontroller, RF, and various sensor and programmable ICs.
$22 USD in 40 days
0.0 (0 reviews)
0.0
0.0
User Avatar
HELLO I AM A PCB DESIGNER WITH FIVE YEARS EXPERIENCE IN ANALOG SIGNALS AND ALSO COMPLETED UP TO 24 LAYER BOARDS .
$22 USD in 40 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of UNITED STATES
Tampa, United States
0.0
0
Member since Sep 16, 2018

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.