Looking for an electrical engineer to design a microcontroller project

Hello! Our team have few ready for use project very similar to yours. And we can also develop custom unit based on your task. Which motor you need to use?

Hello I have experience in designing electronics circuits and can make your project. For your assurance, i can just say that, "I AM IN CHINA RIGHT NOW AND I CAN SHIP COMPLETE WORKING PROTOTYPE TO YOU AND WILL GET THE PAYMENT AFTER YOU WILL RECEIVE THE PROTOTYPE AND WILL BE SATISFIED WITH IT." I can also help you in mass production if you are planning to develop a new product. Thanks

Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded design & programming using pic, dspic controllers and MATLAB codding for Power projects, Boot loaders, Bluetooth & GPS designs,CAN communication, EEprom. UART , RF circuits ,Protocols for networking, wi-Fi routers,OBD diagnosis with CAN bus protocols, Electrical vehicles and AC drives, stepper motor controls. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, 5kW motor controller for EV,synchronous rectifiers, Solar MPPT chargers, Solar trackers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion

Hello, We are a design team include 3 groups: System Design, Layout PCB & Mechanical. We have +15 years experience of Developing custom electronics, Hardware Design, Firmware, Software and +5 years experience of 3D mode (3D print, CNC and molds). Our key skills are IoT, Embedded KIT, Digital & Analog, High-speed, Memory, WIFI, GPRS, GPS, RF, BLE... We have designed up to +20 layers PCB. Experience designing high density boards include FPGA, Flash, DDR, PCIE, SATA, Ethernet, BLE, WIFI, HDMI, USB, QSFP, LVDS...etc. Also, we provide FAB, ASSEMBLY & TEST services. We can make any prototypes, even support mass production. We use the expertise of the following software: - Allegro/Orcad - Altium. - Eagle - Mentor Pads. - Expedition - Solidworks/ Autocad. - C/C++ - Android, IOS... We provide Service & Support even after completion of the projects,when ever necessary. Please contact me & we can discuss more. Best Regards, BK Technology

Hi, I hope you are doing well. I have expertise in embedded system design and development. I have worked with STM32 boards and also with TFT screen interface and Motor Control. I have reviewed your project details and I understand your requirements. Looking Forward for prompt response. Khawaja

Hi Sir, We are best in designing hardware and software based on STM32 mcu series. we do deal with all kind of cortex MCUs. we can integrate all kind of sensors and TFT Screens in your projects. let discuss with us , To get some confidence you can check our portfolio on freelancer to see some of our products. We are professional engineers and developers who do such projects from the last eight years. We offer you our skills for this project at very low rates comparatively without compromising the quality of work. Let me introduce you to our company TURKTRONICS. We are TURKTRONICS. We are professionals with 8+ years of experience in Circuit designs, PCB designs, embedded system solutions, mobile app development, programming and software development. We provide complete end to end solutions for all kind of development projects. IOT is our strong point. In this bid, prototyping and shipping cost is not included however paying extra slight of money to include prototypes. We have collaboration with Atechcircuits & WELLS Inc in Shenzhen China for excillent quality PCB manufacturing. We care about our clients and help them to get out of any potential problem throughout the projects and also give post completion technical support if ever required. We are very much looking forward to hear from you on this in coming days! Cheers!!! Ahmad Lead Technical Engineer TURKTRONICS An Internet of Things Company !

I have long experience with 8-bit , 16-bit and 32-bit micro-controllers. I work with Microchip (PIC) , Atmel (AVR , SAM) , ST (STM) , TI (MSP) and NXP (LPC) micro-controllers. I use KEIL IDE , Atmel Studio , Code Composer Studio and MPLABX IDE . I deliver tested , neat and well-commented code that can be reused or modified for future development. Regarding your project , I have all the HW required (few STM32F boards) and I can recommend an LCD Palette as well. I can show you similar work I have done using STM32F too. More to be discussed once you contact me . BR, M.T.

Assalam u Alekum Hope you are doing great. I am an Embedded System designer and have vast experience with STM 32 Controllers like STM32F407, STM32F401 and STM32F429. I have done several projects related to it. If you are interested then we can discuss details over chat. Regards

hi... we can design your project in Altium Designer.. we ll provide to you schematics, PCB, BOM and gerber files and what you need we are interesting your project, pls give me more details.. we experienced STM32F series microcontroller thanks for now...

Hi, I think I can do it, I have used STM32/TFT LCD/Rotary encoder in many products. Please contact me and discuss about your requirements. I am expert in Circuit Design/PCB layout/Firmware develop and have more than 19 years experiences. I have developed a lot of product, all of these product passed EMC testing. some of these is used in China High-Speed rail system.

That's an interesting task. I have many thoughts and questions about it, so it will be interesting job. Low cost for a review.

Hello, I have many years of experience in the development of electronics. I have projects STM32+TFT+other sensors I can prepare all the technical documentation for mass production. Also fulfill all conditions for certification CE, FCC and ROHS compliance. PCB layout and Circuit Design (Altium or KiCad) I develop compact solutions, and use the new component base and surface mount components. I can show examples, add me to Skype - ivanchuba or email. I'm calculating the minimum cost of BOM at the time of development. Also I can make the necessary number of industrial prototypes. Best regards

I'm an electronic engineer with more than 15 years of work experience. I work as HW designer; FW and SW developer. As HW designer, I work in Altium, KiCad and Orcad and I have experience in development single MCU (Microchip PIC and ARM Cortex) boards with several digital I/O (GPIO, UART, SPI, I2C, PWM,....) and some analog I/O. I design complete board: power section, MCU section, peripheral section,.... I design also boards with battery power; so I have experience in low power PCB design. I have also experience in commercial boards (Arduino, Raspberry, Beaglebone,...) shields design. I have also experience in bluetooth (both 2.0 and 4.0) PCB design. As FW developer, usually I work in C for Microchip PIC (MPLAB X + XC compilers) and Eclipse + GNU ARM for different ARM Cortex M3/M4 manufacturers (STM32Fx, NXP, EFM32 SiLabs, but I'm ready to learn new frameworks). I work both single task and multi task environment (FreeRTOS and RTX). I write code both for low level driver (GPIO, UART, SPI, I2C, PWM....) management and for high level/final application. I work also in "C code" commercial boards Arduino/ESP8266 and Linux embedded commercial boards (Raspberry and Beaglebone). I have also experience in bluetooth (both 2.0 and 4.0) programming. As SW developer, I work in C, C++, .NET, Java, and lot of others programming languages. Mainly I work for Windows O.S., but I have experience in Linux development too. I have experience in openCV library for image/video processing. I have ex

I will design code for motor (PWM-SPWM type) and then I will communicate with sensors to measure the speed and angle but I will take time to sync TFT with STM32

i am an embedded systems engineer with variety of experience in arm cortex microcontrollers programming.

I work with stm32f4 discovery board and can make the PCB for you with IPC stander to be easy to in production

Hi, I have very good experience with microcontroller and mocroprocessor based design. On STM controllers I extensively worked for more than 4 years and I have over all 12 years of industrial hardware design experience. I will understood your requirement. I request to give me an chance to execute the program. Hope we have long term relationship. Rgds Chandra

Having experience in Micro controller hardware designing Having experience in TFT display hardware designing Having experience in sensor and motors