In Progress

digital signal processing project

I want these problems of DSP to be solved for a meeting.

1.2 Tests to be carried out

1.2.1 Implementation of an adaptive filter

Implement an adaptive filter as shown in Figure 1.1 using the update equation 1.18 as a Matlab function. Pass the following arguments to the function: input signal x(n), desired signal d(n), filter length L and the step size parameter (ALPHArel) as relative size to the maximum stable step size according to calibration 1.33 The function shall calculate and return the following sizes: Error signal e(n), output signal y(n), time sequence of the set filter coefficients fn ( Attention: Represents a matrix)

1.2.2 Checking the Implementation: Notch-Filter

to check the self written function use the sum of a white noise and a sine tone at 1KHz as input signal x(n). As desired signal d(n) use the identical noise as in x(n), but without the sine tone. In total, the signal should be about 1s long (about 10,000 samples, depending on the selected sampling rate). Adapt the adaptive filter with this signal for different relstive step sizes (ALPHArel) between 0.1 and 1 and a filter length of L= 100 and document the instantaneous power of the noise e(n)^2 as a function of time to check the convergence. Further document the transfer function of the adaptive filter (to be calculated from the filter coefficient f(n) after convergence of the adaptive filter). Since in this circuit the input signal contains a sine tone that the desired signal does not contain, the adaptive filter should attenuate this frequency to equalize both signals. At all other frequencies, however, the two signals are identical, i.e. the filter should leave all other frequencies unchanged in order to equalize both signals. The result is a filter that attenuates exactly one frequency and leaves the rest unchanged, a so-called notch filter.

1.2.3 System detection

Connect the daptive filter as shown in Figure 1.2. Use an IIR low pass filter as the system to be detected (e.g. the design from the first week of the internship) and white noise as the input signal x(n). Let the adaptive filter adapt with a relative increment (ALPHArel) of about 0.8 and document the filter coefficients f(n) after convergence of the adaptive filter. Compare the transfer function of the system to be detected (the poles of the system function of the IIR filter are known) and of the adaptive filter by magnitude and phase.

1.2.4 Noise suppression

Use the same structure as for system detection and, in addition to the desired signal d(n), a speech signal u(n). After adaptation of the adaptive filter, the error signal e(n) should only contain the speech signal. Listen to the error signal and describe the hearing impression. If it meets the expectation

Skills: Electrical Engineering, Electronics, Engineering, Matlab and Mathematica, Python

See more: multisim audio signal processing project help, digital image processing project vb6, digital signal processing verilog, digital signal processing artificial intelligence, freelance digital signal processing, digital signal processing companies coimbatore, digital image processing project java, digital signal processing viva questions, questions digital signal processing, cuda digital signal processing, digital signal processing freelancer, digital signal processing analysis, digital signal processing tutor, digital signal processing hearing aid project docx, matlab digital image processing project code, digital signal processing expert required

About the Employer:
( 74 reviews ) ifako ijaiye, Nigeria

Project ID: #21694577

2 freelancers are bidding on average $175 for this job


Expertise in MATLAB and DSP with 7 years of academic, industrial and freelancing experience in this field I have completed various protects related this field as you can view my profile for completed projects. I can p More

$150 AUD in 7 days
(86 Reviews)

Hi, i am electronics engineer and have experience with Matlab, inbox me.

$200 AUD in 7 days
(6 Reviews)