URGENT: A High-Speed Unity-Gain Amplifier Design

Please see the attached images for the project specs. Note: Use only 2n3906 and 2n3904 transistors for design. No other transistors or op amps may be used. You may use any combination of resistors, inductors, and capacitors so long as you may justify them through calculations Questions to Answer: 1. An explanation of how you chose your topology, transistor bias currents and the inter-stage DC output voltages within your forward-gain amplifier, together with the calculations used to determine the values of biasing resistors. 2. The schematic of your forward-gain amplifier. 3. A list of the target and simulated transistor bias currents and amplifier output voltages. 4. The DC (quiescent) power consumption of your forward-gain amplifier. 5. The DC transfer characteristic of your forward-gain amplifier. 6. The DC transfer characteristic of your closed-loop buffer. 7. The magnitude and phase response of your loop gain showing the magnitude at low frequencies, the unity-gain frequency, and the phase margin. 8. The magnitude and phase response of your closed-loop buffer. 9. A transient response plot showing the response of your buffer to a 1V peak-to-peak input square wave (i.e. +0.5V to -0.5V, 50% duty-cycle, 50ns rise- and fall-time, square wave), with a frequency of 1MHz. What to Submit: 1. A PDF containing your answers to all of the questions 2. The schematic file used (ideally simulated in simetrix or SPICE) 3. The SPICE netlist used