Find Jobs
Hire Freelancers

Need an engineer: make simple pipeline project in Plant 3D (P&ID)

$30-250 USD

Closed
Posted over 4 years ago

$30-250 USD

Paid on delivery
Need an engineer: make simple pipeline project in Plant 3D (P&ID) or Revit or ets hydraulic engineering 3D soft (Russian speaker better) Task:or 1) There is a schematic diagram (sketch) of the piping of pumping and other equipment, you need to draw in real scale in 3D all the equipment and the pipeline with fittings. 2) (desirable) Calculate the size of pipes, pumps and check for hydraulic errors in the circuit 3) Make a specification for the pipeline, fittings, valves (total about 20 types of equipment (pumps, tanks, filters, etc.) 4) Make projections / drawings for the installation of the pipeline 5) Optimize / minimize the number of expensive valves (discussed online) 6) The entire pipeline, fittings and fittings - only PVC Duration: 1 week Work experience: from 3 years Indicate in your reply letter: 1) the minimum acceptable wage (for the project) 2) work experience and portfolio
Project ID: 21124963

About the project

26 proposals
Remote project
Active 4 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
26 freelancers are bidding on average $196 USD for this job
User Avatar
I am product designer. I am very interested in your project. I have experience to design and render many products using Autocad, Solidworks and 3ds max. Especially, IC engine and combustion, aircraft, furniture, many cars and mechnisms... If you look at my profile, you will know about my past work and ability. If you will hire me, you will get satisfied result for shortest time with high quality.. I can help you. Thanks & Regards ProDesSim..
$140 USD in 3 days
4.8 (165 reviews)
7.2
7.2
User Avatar
Hello, ⭐Dear Employer⭐ Greetings of the day, I have gone through the description & found interesting. I have done many project related to mechanical engineering, 3D modelling, product designing, any kind of simulation, MATLAB, design analysis. I am a professional member here and a full time freelancer, so you can contact me anytime. to brief about me: I am mechanical design engineer by profession and graduate in mechanical engineering with PG in CAD/CAM, ANSYS & Solidworks. I can perform almost all kind of simulation like CFD, FEA, structural analysis etc. I have expertise in many design tools like solidworks, CATIA, ANSYS, Staadpro, 3DMax, Creo MATLAB etc. As i have engineering background with Nine years of industrial experience and very confident about any project related to mechanical engineering field. I have ⭐"Preferred Freelancer Badge"⭐, you can see next to my profile name. You can check my profile and portfolio:- https://www.freelancer.com/u/ashrafshekh.html My bid is negotiable and it depends on the required deliverable. Looking forward to hear from you & feel free to contact me Thanks & regards Ashraf Shaikh
$250 USD in 7 days
4.9 (84 reviews)
7.3
7.3
User Avatar
I am here to bring your product to life. I'm a mechanical engineer and I have 8 experience years. Experience type: 3D, 2D models, Render, Sheet metals, Machine and Devices, industrial product, Plastic molds, plastic parts Software program: Autodesk Inventor,Solidworks, Autocad , NX-Siemens I am always glad to cooperate, I guarantee quick lead-time and free revisions and required. Your project will be developed with speed and high quality, as well as all the jobs already accomplished. Please send me a message
$250 USD in 7 days
4.7 (22 reviews)
5.4
5.4
User Avatar
Dear Sir ! I have had many years of work with piping drawing, PI&D, piping isometric I have reviewed your description of the project, I found that I could do it. I will provide you with high quality You can contact me any time to discuss the project. Thank you Kind Regards,
$400 USD in 7 days
4.5 (44 reviews)
5.0
5.0
User Avatar
Hi, My name is Ali Özcan ÇİÇEK. I am a mechanical engineer. I read your job carefully and found that it was suitable for my skills I have been working mechanical design for 14 years. During this time I designed more than 80 machines, units or devices for garment, textile, agriculture, plastic recycling, HVAC, automobile sub-industry, durable consumer goods, packaging, transportation-transmission and industrial kitchen sectors. You can see some of them from my profile. 2 of them are patented (belong to me) and designed in the last 4 years. https://www.freelancer.com/u/aliozcancicek?w=f I also CFD expert. I have done many thermodynamics and flow analyzes in various software. You can see some of them from my profile. If you hire me I can complete your project on high level.
$140 USD in 7 days
4.7 (2 reviews)
3.8
3.8
User Avatar
Hi, I'm a civil engineer & steelcture designer & AutoCAD designer & structure designer, I have experienced 3+ year, I can help you with your project, I can well on your project.
$30 USD in 2 days
5.0 (2 reviews)
2.3
2.3
User Avatar
Dear sir, This job could be done simply by CADWORX, but drawing of equipment will be needed from you side, also P&ID diagrams Thank you
$200 USD in 7 days
5.0 (1 review)
2.2
2.2
User Avatar
Hi, I am Mechanical Engineer with 5 yrs of professional experience. I am currently working as Piping designer with Manufacturing company. I have diverse experience in producing Isometric, detailed drawings for PVC piping and equipments. I can provide you samples of my current work. Feel free to contact me anytime. Thanks
$222 USD in 7 days
5.0 (5 reviews)
2.1
2.1
User Avatar
⭐⭐ Hello, Dear! ⭐⭐⭐ i am a full web developer with over 5 years on freelancer.com. ****In SPECIAL very familiar with 3D Modeling, CAD/CAM, Solidworks Modeling , Design and Analysis, Mechanical Engeering***** I have read your description and have interests in your project. I have rich experiences in projects similar to yours. I am ready for your project now. I can do it and start right now and always be availabe for you with fulltime manner. I would like to have a discussion on chat to get more about your project. Thanks. Best Regard
$140 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have more than 3 years in Mechanical Design with a good expert in international standards, codes and design regulations, e.g.: ASHRAE, NFPA, HTM, SMACNA, IPC, IFC.
$140 USD in 7 days
5.0 (2 reviews)
0.0
0.0
User Avatar
im a mechanical designing engineer with experience 2 years. I have done lot of projects like this.I'll complete my work within the time only without any delay
$70 USD in 5 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have been doing this work for 20 years. Relevant Skills and Experience I can send one of my project of
$277 USD in 14 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Приветствую! Готов к сотрудничеству. Сделаю в Компасе.
$250 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I have made 3D evaporation plant ( 6-7 effect) with all piping. From your P&ID I will be able to make 3D piping structure with Bill of materials. Thanks
$244 USD in 6 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, Total Experience of 8 years in a Piping Engineering as a Piping Designer. Software known Plant 4d Autocad micro station -Developed conceptual piping arrangement based on P&ID piping design standards. -Prepared piping plans, sections, isometric drawings. -Developed piping isometric drawings. -Checked piping isometrics per P&ID and specifications. -Prepare MTO (material take-off) for valves & fittings. -Prepare line list of piping. -Checking 3D Piping models according to P&IDs and vendor drawings. -Daily checked for clashes with other disciplines utilizing Navisworks. -Petro/Chemical piping design. -Maintained P&ID's, PFD's and became very familiar with the process. -Generated Piping and Instrumentation drawings (P&ID's).
$166 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Dear Hiring, we hope this msg finds you well, here's AimTeam we have more than 5 years experience, we read your descriptions and we figured that we are able to do it, we deliver same project many time before, as we agreed we can deliver it in 2 day. Best regards, AimTeam
$250 USD in 2 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Здравствуйте I have been working on similar projects (also in Russia) for over 12 years as a mechanical design enginner (M.Sc.). I exactly understand the scope of work and would be glad to work with you if you would accept my high-quality, on-time delivery and after-delivery supported offer as long as you use US,EN or any international standard and/or as long as HVAC design parameters are decided. For SNIP am not that much familiar. I will use Revit for design and calculations. Additionally I have a completed job reference and %100 secure account in FREELANCER.COM. Please see my profile for my reference and completed projects. Regards...
$400 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
as per the requirement and bid
$244 USD in 6 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Starting from P&ID and having the implantation area, the distribution of the indicated equipment and connection of the pipes is made optimizing the accessories, then the hydraulics of the system are calculated and the necessary corrective measures are taken. I'm a mechanical engineer, trained as a Gas Engineer on the National Petroleum State Company (PDVSA), oriented to the processing of gasses, plants design, gas pipelines, and separation equipment of gas byproducts. I got ample experience in the field of more than 27 years, on the execution of Conceptual Engineering, basic and details on projects for the Gas & oil Industry, such as pressure pump stations, compression plants, pipelines, and fire prevention/protection systems.
$230 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, I'm an architect. I can help you with your project. I have 3 years of experience in an installation company, modeling in revit perfectly and towards the calculations of Hiraulicos, if you wish you can verify my portafoleo in which it looks like a model perfectly, what It is required with all the accessories and details you need, I hope and I can help you, thanks.
$150 USD in 7 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of RUSSIAN FEDERATION
Russian Federation
0.0
0
Member since Oct 29, 2017

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.