Find Jobs
Hire Freelancers

Structural Mass Street

$30-250 USD

Cancelled
Posted about 1 year ago

$30-250 USD

Paid on delivery
I need someone to design a structural beam to carry a flat roof load. The roof is 20' wide by 25' Long. The rafters are 2x10 16" OC free-spanning the width of 20 from North to South . The 2x10's are about 16 feet long and they over lap in the middle to span the 20' distance. The rafters are sagging in the middle from the weight of the roof. The roof consists of 1x10 nailed perpendicular on top of the rafters. There is a layer of 3/4 plywood on top of the 1'x10's. There is a layer of asphalt rolled roofing on top of the plywood. There is then a rubber membrane covering the rolled roofing. I plan on spraying 2" of Spray closed cell foam on top of the rubber membrane with a latex coating on top of the foam to seal the roof. The Rafters run North and South and sit on top of the North wall and the South Wall The North wall is a 2x4 knee wall framed on top of an 8" wide foundation stem wall that sticks up 8" above the floor. The South wall consists of a 2x4 Knee wall that sits on top of an 8" Hollow block wall with a 16"x 32" column in the East and West Corners respectively. The East end of the building contains an 8'x 18' wide overhead door. with a 2x10 header that sits above the door and a 2x4 knee wall extending above the header to the roof. Overall height from floor to bottom of rafter is 160". The West end of the Building is a 2x4 wood knee wall 55" tall sitting on top of a 2x8 wood wall that is 8' tall and sits on top of a foundation stem wall that is 8" tall by 8" wide. Overall height from floor to bottom of rafter is 158". I am looking to span 2 beams under the rafters running perpendicular (East To West). First Beam would would be located 72" from the North wall running parallel to the North wall. The second beam would be located 72" from the South wall running parallel to the South wall. These 2 beams would be supported by 4 LVL's running underneath the beams and tied to the North Wall and the South Wall. On the North Wall, the LVL's Will be tied to the existing 2x4 framing with additional Framing added under the LVL to carry to the load to the 8" stem wall. The LVL's will be supported on the South wall in the same manner. LVL will be tied to existing 2x4 framing with additional framing underneath the LVL to transfer the load from the LVL to the 8" block wall. I need the 2 steel beams designed along with the 4 LVL's designed and specified. I'm not opposed to another design idea. if you think 4 LVL's is overkill, 3 would be ok.
Project ID: 36184711

About the project

20 proposals
Remote project
Active 1 yr ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
Awarded to:
User Avatar
Hello. I read your proposal and I got it what you want in this project. I am a building architect/structural engineer with more than 5 years of experiences in the fields of commercial projects. If you are hire me, your project will be complete very quickly and perfectly. I'd like to discuss more via chat. thanks.
$100 USD in 1 day
4.6 (3 reviews)
3.9
3.9
20 freelancers are bidding on average $112 USD for this job
User Avatar
Hello Jeff W., I m an Architect/Civil Engineer/BIM/CAD Expert and will offer you the Best Discount. You can pay me a reasonable price + Good Review only. I want to review your Structural Mass Street plans/sketches,/ideas and work with you. I know you have many proposals to look through, to make this quick. Please get in touch with me to discuss this project in more detail. My first priority is that my client will be satisfied with my work. I am an expert in these softwares, ✔ ArchiCAD ✔ Autodesk Revit ✔ Autodesk AutoCAD ✔. Autodesk 3ds max ✔ Sketch Up✔ Autodesk Navisworks Manage✔ Estimation ✔ HAPE ✔ ETAP✔ Tekla If you assign me your task, I will carry out your project with the best quality. Please come over chat and discuss your requirement in a detailed way. Thanks Fayyaz and Team
$190 USD in 5 days
5.0 (21 reviews)
6.0
6.0
User Avatar
Dear sir! I am an AutoCAD expert, Architect and Civil engineer. I checked your job carefully and I have a great interest in your project. I have many experiences in your project and can deliver perfect result within deadlines. About for permitting drawings, I can provide such as a floor plan, elevation, site plan, roof plan and MEP plans. Also, I have a lot of experience of converting pdf, sketch or image drawing to AutoCAD. You can confirm on my profile page. https://www.freelancer.com/u/tranvuthai If you hire me, then your project will be completed more successfully. I am waiting for good news. Best Regards Thai
$50 USD in 2 days
4.9 (15 reviews)
5.9
5.9
User Avatar
Dear ⭐⭐ I have checked your project details carefully " Structural Mass Street ". I am a building architect. I have full experiences in creating of technical/permit drawing . I can start to work soon, and will finish asap. Please contact me so that I can help you. Thanks.
$50 USD in 1 day
4.8 (40 reviews)
5.5
5.5
User Avatar
As a professional and experienced structural engineering technical writer, I bid on your project because I have the expertise to deliver superior quality work. I guarantee you constant updates in the project as a way of ensuring the project meets your expectations. Please respond to the bid so that we can discuss the project exhaustively. Thanks in advance.
$230 USD in 3 days
4.9 (11 reviews)
5.3
5.3
User Avatar
Greetings... I'm very interesting on your project proposal. I am a PROFESSIONAL ARCHITECT and STRUCTURAL ENGINEER with 5 years experience in the field of construction and designing by using autoCAD, revit, archicad, sketchup etc. I can finish your project perfectly in your timeline and can upload working file whenever you want. Please discuss with me, thanks.
$50 USD in 2 days
4.7 (17 reviews)
5.2
5.2
User Avatar
Thank you for posting project. I have read your project carefully. I am a structural engineer with experience of more than 7 years. I am expert in steel & wooden framed structure and RC analysis & design. I use ETABS & Sap2000 & Midas Gen for structural analysis and use Midas GTS NX for foundation & geological analysis. I'll provide a good result in time. Please send me a message so that we can discuss more. Best regards
$50 USD in 3 days
4.8 (11 reviews)
4.9
4.9
User Avatar
I have read and understood the details of this project "Structural Mass Street". I am a Highly-Qualified & Skilled ACADEMIC WRITER with more than 10-Years of experience. In last 10 years, I have served more than 2,500 clients and achieved 98% satisfaction ratio of my clients who have scored more than 90% in all their subjects which were handled by me. I strongly believe in customer satisfaction and this is the key factor of my success and I provide a service that gives quality outcome to my clients. I am professionally able to write; Essays, Summaries & Blurbs, Discussions & Replies, Dissertation & Thesis, Lab Reports, and Research & Report Writing. I assure that I will provide plagiarism-free work, also as evidence I will provide you free Turnitin reports. I am familiar with all references and formatting styles; "APA" "MLA" "Harvard" "Chicago" "IEEE" "OSCOLA" and "Vancouver". In order to talk with me, please click on “CHAT” button so we can finalize the deal. Thank You
$30 USD in 1 day
5.0 (2 reviews)
2.3
2.3
User Avatar
I am an academic expert who can help you with your solutions like; Case Studies, Summaries, Reports, Thesis & Dissertations, and Online Exams and Courses in almost every language. I am new to this website but I assure you that I will provide you with 100% quality work without plagiarism within your given deadline and budget. I am new here but I am familiar with this industry as I am working here since 2013. Please give me a chance and feel free :) Thank You
$30 USD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
✦◼️✦ "Full-5 Stars Rating✦◼️✦ - ✦100% Marks Guaranteed!✦ I have 9+ years of experience in managing academic writing jobs successfully. I have done my Master's in English Literature, but I have worked with clients completing their tasks for different subjects such as; English Literature, Social Sciences, Finance, Economics, Medical, as well as, Nursing. I have prepared myself all of these professional years to be a multi-tasker, who can help you to get out of trouble for any type of assignment. I always provide my clients with High-Quality Solutions at very REASONABLE PRICES even with SHORT DEADLINES. I can help you with; Case Studies, Research Essays, Online Exams, Quizzes, Summaries, Reports Dissertations ETC. I provide FREE Turnitin reports and countless revisions facility to fully satisfy my clients. and "I PROMISE you with 100% SUCCESS". For samples, visit my profile: https://www.freelancer.com/u/FineIdeas
$30 USD in 1 day
0.0 (1 review)
0.0
0.0
User Avatar
I am damn sure that I can complete this project "Structural Mass Street" beyond your expectations and within your given time and budget. I am a Ph.D. degree holder in education management with vast experience in the academic writing field. Alongside my team, I provide custom writings that not only meet your requirements but also adhere to the rules of academic writing. I can solve any kind of assignment related to every subject; Business, Public Relations, Economics, International Affairs & Relations, Education, History, Sociology, Psychology and Criminology, Engineering, Mathematics, English, Literature, and Psychology. I will help you to score over 90% grades in all your homework and assignments even with short deadlines. I promise you that I will provide high-quality and plagiarism-free solutions even with "3-Hours" deadline. Please click on "Award" button to hire me. I am waiting for you, "Thank You"
$30 USD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
I have read and understood all your project details "Structural Mass Street" and I feel my self the best candidate to complete this project with 100 percent accuracy. I am a Highly-Skilled Mathematician and Engineer who can help you to solve all your problems with 100% accuracy. I have a super grip on both niches as I have completed Ph.D. in Mathematics and Engineering. I have more than 5 years of experience in managing academic tasks related to Mathematics & Engineering with an A+ grade. I can help you with; High Power Electronics, Communication Systems, Engineering Problems, Power Engineering, Thermodynamics, LENIAR ALGEBRA, DISCRETE STRUCTURES, DISCRETE, and TRIGONOMETRY. I also have a super grip on various software, such as; LabView, Matlab, Simulink, Multisim, LtSpice, Proteus, and Altium. Please message me, I am waiting for your response.
$30 USD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, I have seen your your project details and I am the "BEST CANDIDATE" for this job "Structural Mass Street". I am an experienced Engineer & Mathematician with more than 8 years of experience who can provide you with Top Notch Solutions as per your requirements within your given deadline and budget. I am M Phil in Mathematics and Graduation in Physics and I have full command of all the areas related to both subjects. My specialties are; LENIAR ALGEBRA, CALCULUS, TRIGONOMETRY, Mathematics, GEOMETRY, MATRIX, Electronics, Digital Logic Design, Circuit Designing, Power System Protection, Communication Systems, and Many More. I have a strong grip on several tools/software such as; Pspice, Multisim, Power Word Simulator, Altium & MATLAB & Simulink. To check my samples, please visit my profile; https://www.freelancer.com/u/IdealExpert Please send me a message to "Hire" me. Thank You
$30 USD in 1 day
0.0 (1 review)
0.0
0.0
User Avatar
Structural Mass Street I am Minahil Hameed with a vast amount of experience in multiple fields like; Finance & Economics, Accounting & Cost Accounting, Business & Management, and Taxation & Auditing. I have achieved a great amount of success in this industry by providing TOP NOTCH solutions to my clients. I always provide quality services & respect to my clients because I consider him/her my BOSS. I provide a friendly environment to my clients so they always feel comfortable and openly discuss their requirements which allows me to produce MAXIMUM results...! Please visit my profile to see my reviews and samples. www.freelancer.com/u/writinglabb
$30 USD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
My name is "Usama Safdar" and I am a Ph.D degree holder which means I am highly-capable to tackle this project "Structural Mass Street" with 100 percent accuracy. I am a professional writer with over 6 years of experience in writing; Essays, Research Summaries, Thesis, Dissertation, Lab Reports and Case Studies. I always provide High-Quality Solutions within the shortest possible time with all instructions followed against very reasonable prices. I can manage works even with shortest deadlines like; "2500 words work in just 6 Hours" with very reasonable time. As a pro academic writer I am also familiar with all the referencing styles; such as APA, Harvard, OSCOLA, IEE, MLA etc. I always provide plagiarism-free solutions and as a prove I also provide "FREE Turnitin reports". For Samples, please visit my profile https://www.freelancer.com/u/SolutionMart Please message me to start the discussion. Thank You
$30 USD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
Structural Mass Street My name is Rabia Faisal, I am working in the writing industry since 2011. During this time, I have served countless clients with a full amount of satisfaction by providing them with TOP Quality Solutions. I have command of all references APA, Harvard, IEEE, MLA & Chicago, etc. I will provide plagiarism-free work with 100 percent accurate grammar within your given deadline. Please message me to get Top Class Services. I am waiting; https://www.freelancer.com/u/TopWritingGuru
$30 USD in 1 day
0.0 (0 reviews)
0.0
0.0
User Avatar
DEAR CLIENT. Greetings and welcome to my profile, where client satisfaction is 100% guaranteed. I take pride in the quality of my work, and hence be sure to always receive professional and quality services. CERTIFIED & LICENSED ENGINEER, EXPERT IN NAMED REQUIRED SKILLS. Dear Client, I have KEENLY gone through the project details as given in your project description. Being in possession of all CLEARLY STATED required skills ((Civil Engineering, Structural Engineering, Building Architecture, AutoCAD and CAD/CAM)) as this is my area of professional specialisation having completed all academic certifications and developed adequate experience in this field; I hereby humbly request you to consider my bid for professional and quality services at affordable rates. NO TIMELINE & QUALITY EXCUSES||| UNLIMITED REVISION||| FULL TIME SUPPORT FOR ENQUIRIES. Message me we discuss more about the project and get into action. Incase the project is deleted hire me directly through the link; https://www.freelancer.com/u/josephmuindenzio THANK-YOU & WELCOME
$250 USD in 1 day
0.0 (0 reviews)
0.0
0.0

About the client

Flag of UNITED STATES
Eudora, United States
5.0
4
Member since Oct 30, 2017

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.