Find Jobs
Hire Freelancers

Design of steel structures in Solidworks

$30-250 USD

In Progress
Posted about 10 years ago

$30-250 USD

Paid on delivery
Make a new steel hall based on below drawing frame (the drawing made for snow and wind load simulation). You can utilize existing Solidworks (2013) drawings. See pdf for example images below. The SW drawings will be modified so it match the below given dimensions. The work will be: - Make design for a 25x64 m long steel hall - Roof angle 21 degrees - Two door openings - Steel sheets for wall and roof to be included, see below images taken in SW for reference. - The lower part (two meters from the ground) of the walls will have concrete walls (ab. 200 mm thick). The upper part will have corrugated steel sheets. - Save the design preferable into SW 2014. Except the SW part and assembly design drawings shall also be made: - Part drawings with dimensions and material specification - Assembly drawings of one frame. Numbered Part and Cut list shown. - Assembly drawing of the gable frame. Numbered Part and Cut list shown. Note-1: there are no doors in the gable. Note-2: only one end of the steel hall will be covered, the other end is open because it’s an extension of an existing hall. - Assembly drawing of the whole steel hall frames (16 pcs) + the wood beams for wall (upper part) and roof shown + concrete wall (2 m from ground) is shown - Assembly drawing where all the steel frames (16 pcs) are shown + concrete wall (2 m from ground) is shown - Assembly drawing where all the steel frames (16 pcs) are shown + concrete wall (2 m from ground) + corrugated steel (roof and wall) sheets are shown + the wood beams for wall (upper part) and roof is shown See attached pdf for more info and images. How much will it cost and how long time will it take to do this?
Project ID: 5300267

About the project

23 proposals
Remote project
Active 10 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
Awarded to:
User Avatar
Hi sir, I am a Mechanical engineer by profession & CAD expert and using Autocad, , CADWORX, SOLID Works 2012 & 2013, Proe/CREO & Autodesk Inventor for many years I'm working in Piping & structural model and SKID, handrails, ladder, stairs and tanks detailer and Spools fabrications. Generating P&ID, Equipment, Structural, Piping layout and ISOMETRIC Spools Using CADWORX. I'm also a freelance product 3D designer, Animation Sheet Metals and detailing from scratch through prototyping or 3D printing. I can do your job... Please allow me to work on your project I'm happy to help you & looking forward to work with you. I'm a full time freelancer and available ready to work.
$155 USD in 3 days
5.0 (7 reviews)
4.1
4.1
23 freelancers are bidding on average $227 USD for this job
User Avatar
A proposal has not yet been provided
$335 USD in 10 days
4.9 (8 reviews)
5.0
5.0
User Avatar
Hi, I am Mechatronics Engineer and currently doing job as Mechanical Design & Development Engineer in reputed organization. I have done lot of Mechanical Design, Development and Reverse Engineering Projects. I can design your product for manufacturing, according to your requirements. For reference, view my profile, portfolio and project history, especially the reverse engineering projects done for the user "bradfordharbour". Regards, Muhammad Salman Mughal
$275 USD in 3 days
4.8 (9 reviews)
4.5
4.5
User Avatar
I am Irish, who is living in Philippines I have a lot of experience in structural & mechanical design and fabrication. I am capable of using packages such as , Inventor, 3Dmax, Navisworks,Solidworks and AutoCAD. My experience in previous jobs has involved Mechanical machine design for mining and plant processes and fabrication drawings to manufacture these. I am a good team player and very cooperative. I am very enthusiastic and dedicated to the work I do. I am always available to be contacted by any customer at any time the need arise
$315 USD in 12 days
4.7 (8 reviews)
4.3
4.3
User Avatar
Hi we are a team of Civil and structural Engineers Providing solutions for your jobs. We would like to undertake your job. We guarantee 100% accuracy and quality. We are Professional Engineers providing Solutions in Civil, Mechanical, Chemical Engineering fields in Sri lanka. We are a registered company in institute of Engineers Sri lanka. And our team spans over 15 countries. We are consulting over 20 mega projects at the moment all around the world. Why you should offer us- We offer you the lowest bid with highest quality work. Our Professional engineers will always be there to help you even after the completion of job. without any charge. We have highly qualified academics in our crew. And your job is not just a solid works drawing job and it needs a professional structural engineering knowledge. we will design it using Solidworks and analyze using SAP2000 which is a dedicated software for Structural analysis. We are looking forward to a successful relationship with you
$250 USD in 3 days
5.0 (17 reviews)
3.8
3.8
User Avatar
Hello Sir , i am really 1000% right person for this job . Expert in Reverse engineering , Manufacturing and production Product/system desiging , engineering/manufacturing drawing etc etc using all Major Softwares From Conceptual design to Product Development ALROUNDER working since 1999. i have full facility of manufactring . etc etc for more discussion please reply free of cost Thanks skype ID : naeem_cad00 yahoo id : naeem_cad00 yahoo dotcom
$200 USD in 8 days
5.0 (4 reviews)
3.0
3.0
User Avatar
Hi, I wold like to work on this project. I'm civil engineer specialized in steel structures, and an expert in Solidworks. Best regards, Danijel
$250 USD in 14 days
5.0 (2 reviews)
3.0
3.0
User Avatar
Sir I am an experienced academic writer having MBA..... It is a very easy project for me..... I promise you perfect completion of this project within the shortest possible time.... Please check my portfolio and samples to judge my quality.... Let us commence at once... Thanks Ishtiak
$144 USD in 3 days
2.4 (3 reviews)
3.5
3.5
User Avatar
Hi there..!! I have gone though your project description. This belongs to my forte. Have a look at my Portfolio & Profile I'll provide you full satisfaction over the Timely, Accurate and Quality Model and Photorelistic Renders. I'll be doing this in 3ds Max + VRay and I can provide you model importable to Solidworks. Looking forward to your Reply...
$284 USD in 12 days
4.6 (1 review)
2.5
2.5
User Avatar
Hello, I can do this job right in time like always for other projects. You want the drawings for fabrication or for show drawings in Solidworks? This kind of projects are not suitable for Solidworks. I can do your fabrication drawings in 24 hours. See my portfolio. Best Regards, Ion
$157 USD in 1 day
5.0 (1 review)
1.5
1.5
User Avatar
Hi, Im able to do this task for you. I have expirience doing this kind of job. The doors and the sliding component for it, would be to you consideration, and I will require some extra details on thath. I hope both can benefit for thi job, I just stat in the freelancer site and more than the money I will requiere some expirience, and positive reviews, witch I intend to earn!. If you need fasts results I can have the design in about a 7 days. Kind Regards. Alejandro Santiago.
$277 USD in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
I am a construction engineer (Master’s degree in construction engineering) with a long term experience in designing and constructing objects. For project requirements I use Microsoft Office (Word, Excel, Acces and Project), AutoCAD and other programs for modeling and construction analysis like STAAD, Tower etc. I have basic knowledge of English language.
$261 USD in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello Sir I am a Mechanical Design Engineer with 8+ yrs of experience in Product Design & Development work, Reverse Engineering, prototyping using CAD software like Solidworks, Inventor, Pro-E software. I have gone through the job description and would like to inform you that I have done similar type of work successfully many times in my career where I used Solidworks to develop 3D models of part, assembly, sheet metal component of plant structure from the data provided by the customer and produced detail 2D drawings along with partlist for production purpose. This interests me to work with you in this project as I have the technical skills, Solidworks expertise and quick turnaround needed for this job. Requesting you to provide me an opportunity to serve you, I assure you quality work & timely delivery of output. Ready to start the job & looking forward for a fruitful association. Requesting you to send me a message so that I can provide you the presentation file of the structural work I did for my client. Best Regards Arup
$222 USD in 10 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, Good day to you. I am a Mechanical design Engineer for an aerospace firm. I have more than 6 years of engineering design, prototyping, 3D CAD modeling, tooling design, 2d drawing generation with GD&T and manufacturing experience. I have a working experience of more than 6 years on CAD modeling softwares such as Solidworks, AutoCAD and Creo Parametric. I am using Solidworks 2013. Looking forward to working with you. Regards Muhammad Inam Ahmed
$244 USD in 15 days
0.0 (0 reviews)
0.0
0.0
User Avatar
good day I can do this, i have 5 years of experience in this kind of job in mexico please check my portfolio, there are some examples. regards
$240 USD in 12 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hello! I'm new here and I need some reputation, so I will do the work for cheap :D Waiting for your reply to start, thank you. With respect Vahagn Gevorgyan (remelephant)
$110 USD in 8 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Hi, My name is Viktor and I have M.Sc. in Mechanical Engineering. Also, I have professional experience of more than 3 years as product designer and developer, mold designer, R&D engineer. I am highly profiled in 3D modeling, product development and industrial design, molding, rendering and animation, technical documentation, FEA. In order to see my capabilities, please take a look at my profile and portfolio. Best, Viktor
$166 USD in 7 days
0.0 (0 reviews)
0.0
0.0
User Avatar
Mechanical Engineer graduate (UNIVERSITY OF NOVI SAD, Faculty of Technical Sciences) with 15+ years of experience in manufacturing, design and pre-production. (3D model, engineering drawings, workshop drawings, assembly drawings) Skills - AutoCad, SolidWorks, Autodesk Invertor.
$155 USD in 7 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of FINLAND
Kimo, Finland
3.9
18
Payment method verified
Member since Apr 19, 2011

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.