Creating filters and RF algorithms in fpga to be used as IP

In Progress Posted May 4, 2013 Paid on delivery
In Progress Paid on delivery

This project is to make a small USB MODULE, which can operate on the GMRS / FRS / MURS frequencies and spectrum. This module should be powered by the USB port. It should have the property support for the channels and frequency's. It should be able to transmit some form of data on those frequency's and communication in various modes such as duplex and etc. The module it self has no buttons. It only has a MICRO USB connector for the PC. The PC software will allow talking, sending data through the module. It will allow changing the power output of the module, channels, frequency as needed. Sending data is to other module or device. Talking is to those standard walkie talkie devices on the market that use GMRS / FRS / MURS.

You will need to create a GMRS / FRS / MURS / VHF/ UHF module with a simple pc based interface for data / voice communications. You can use either a combination of standard IC's or create a simple IP code for a cheap FPGA. Parts count must be as little as possible.

Electrical Engineering Electronics LabVIEW Telecommunications Engineering Verilog / VHDL

Project ID: #4489810

About the project

1 proposal Remote project Active May 5, 2013

Awarded to:

euripedesrocha

Hi I can help you!

$440 USD in 45 days
(9 Reviews)
3.4