Find Jobs
Hire Freelancers

Arduino electrical/PCB design

$30-250 USD

Completed
Posted about 7 years ago

$30-250 USD

Paid on delivery
Design a production ready, high quality and safe PCB layout for Teensy (3.6/LC), AD5602, a rotary encoder, a switch, some LEDs and a small display.
Project ID: 12801106

About the project

33 proposals
Remote project
Active 7 yrs ago

Looking to make some money?

Benefits of bidding on Freelancer

Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
Awarded to:
User Avatar
Hello, I have designed boards with the Teensy 3.1 for industrial applications. In this applications, how do you want to use the DAC, iterface the encoder, switch, and panel? Will these require isolation? What voltage will be used to supply the circuit and what size do you expect the final board to be? I use Eagle 6.5 for schematic and layout, LTSpice for simulation. Best regards. Stuart Borden.
$250 USD in 15 days
5.0 (6 reviews)
4.3
4.3
33 freelancers are bidding on average $211 USD for this job
User Avatar
hi, i am an electrical engineer. i have expertise in embedded system design and Matlab.i can help you with this project. Kindly reply back and let us discuss project further. regards
$500 USD in 6 days
4.8 (70 reviews)
7.7
7.7
User Avatar
Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded programming using pic, dspic controllers and MATLAB codding for Power projects, Boot loaders, EEprom. Protocols for networking, wi-Fi routers. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, synchronous rectifiers, Solar MPPT chargers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion.
$555 USD in 15 days
4.8 (56 reviews)
6.7
6.7
User Avatar
Hello Sir/Madam, I am Anthony Perera from Sri Lanka and I have multiple degrees on Engineering field. Why you should hire me ? * I am a FULL TIME freelancer and once a project is awarded to me,all my time will be dedicated to that specific project so you will get fast and quality work. * I have been in the field of product designing so if you are developing a commercial device I can help you to design it at very low cost and also can get into contact with Chinese manufacturers who I work with. Very reliable and fast. * I have my own PCB printing facility and also a workshop where I can design and manufacture any number of samples/prototypes. In that way you don't have to find some one else to test my work. * My prices are very fair and can be negotiated all the time. I am very flexible and very understanding. You can see my reviews. Check my profile. See for your self. https://www.freelancer.com/u/Anthony989.html I can design and manufacture a prototype and test it too. Please contact if you are interested. Thank you Anthony Perera
$200 USD in 3 days
4.9 (39 reviews)
6.3
6.3
User Avatar
Hello, Good Morning. I am running a setup for developing Electronic devices. We will send you complete PCB design. Please feel free to contact us. Best Regards, Shahbaz.
$400 USD in 15 days
4.5 (47 reviews)
6.9
6.9
User Avatar
Hi sir, We are best in designing customized PCB solutions for our clients. we are doing such jobs on Eagle and Altium but we are also good in other software too. We do both single layer multilayer, slow speed high speed PCB layout designs. We offer you our services for your project at very affordable rates. We are just greedy of some good five star reviews to improve our rating that is why we bid so low. Let's take advantage of it. We assure you the quality of service through various checks that are employed to avoid any compromise on quality of work. Let me introduce my team to you and generally what services we offer to our clients. We are team of expert engineers and developers who are sound experienced in embedded systems (arduino + other microcontrollers), programming, circuit designs, electronics, product designs, pcb layouts, database management, MySQL etc. We offer you our services at very low rates. Please discuss with us in details. We will deliver design and code, if you want us to send you prototype, you have to pay additional charges of prototyping and courier such as dhl etc. We are very friendly in nature and help our clients during and after projects completion. We are flexible in communications and rates. Very much looking forward to hear from you on this in coming days. Regards, Ahmed Lead Technical Engineer Turktroniks
$86 USD in 3 days
4.9 (39 reviews)
6.0
6.0
User Avatar
I will do this. please provide me all the technical details about this so that I can start working on it.
$155 USD in 3 days
4.7 (52 reviews)
5.9
5.9
User Avatar
Hello dear I have experience in designing electronics circuits and can make your project. I will make your project practically on breadboard and will provide you circuit, code and PCB design along with gerber files. I will design your project using extra cheap and reliable components that will be beneficial for you if you are planning to make a commercial product.I also have experience in bluetooth modules and android apps development. I can also develop android app for you that will be able to control your project and you will be able to monitor your data. If you wish we can discuss in chat.
$150 USD in 7 days
4.8 (23 reviews)
6.0
6.0
User Avatar
Hi I am interested to your project. I am familiar with Electronics, PIC microcontroller as well as PCB design by Eagle.Thanks.
$250 USD in 10 days
4.8 (65 reviews)
5.5
5.5
User Avatar
Hi, Basically I'm an electronics engineer. I have seven years of experience in embedded system design using raspberry pi and arduino. I'm also expert in pcb design. I know double side as well as multi layer pcb design. Also know to design low noise pcb design for microwaves. Come to chat for more discussion. Thank you
$155 USD in 3 days
5.0 (4 reviews)
4.5
4.5
User Avatar
Dear Client, Hope you are doing great. Thanks for the project post and providing an opportunity to bid. It is my immense pleasure to submit my proposal for this project as I am a skilled Electronics & PCB designer with more than 6 years of experience. I have appropriate knowledge and experience in Electronics and PCB designing. I can work on designs based upon new ideas, reference schematic and re-engineer circuit based upon actual PCB pics. I have worked upon several projects which includes MCU interfacing, sensor designs, accelerometer and Gyro designs, GPS/GSM designs, RF designs, Bluetooth (BLE2.0, BLE, etc), custom XBEE design, actuator interfacing, amplifier design, audio codec, memory units, USB/FTDI interfacing, battery/power management and many more similar projects. I have worked upon custom Teensy PCB. Should I design a PCB with Teensy (3.6/LC) interfaced with AD5602, a rotary encoder, a switch, some LEDs and small display or it should be a shield.I will design PCB interfaced with Teensy (3.6/LC) GPIO interfacing as needed. Design step will have schematic update in tool. After that optimized routing will be done, Gerber Files will be generated. The deliverable will include source files, schematic and layout, BoM and Gerber data. Kindly revert so that I can provide my work references on similar project. Based upon scope of the project, we can also think about fixed price options. Looking forward to work with you. Kind regards, Amit
$133 USD in 5 days
4.6 (6 reviews)
4.4
4.4
User Avatar
Dear Customer I have read your project specific requirement for Arduino and PCb design. Our Skills:- Embedded System:- Microcontrollers/Development Platforms ARM Cortex based microcontrollers, PIC 18 and 16 series, 8051 and its derivatives, MSP430, Arduino, Raspberry Pi, Beaglebone Balck, PLC programming Operating Systems and Libraries FreeRTOS, Embedded Linux, etc. IDEs and Toolboxes Kiel Microvision, CCS, MPLab, Visual Studio, Labview etc. Programming Languages Embedded C, Assembly, VHDL PCB Designing Altium Designer Studio Computer Vision/Image Processing OpenCV, MATLAB Our team includes graduates in Electronic & Communication, Instrumentation & Control Engineering with experiences more than 10 years. We guarantee 100% dedication to your project and we will continue to work on it until you are completely satisfied with what we work portfolio projects that you are free to peruse through at your discretion. “I would love to hear from you” You are most welcome to contact me any time 24/7 for discuss/ask any query on skype or chat. Thanks & Regards, Sudhir
$250 USD in 10 days
4.8 (4 reviews)
4.0
4.0
User Avatar
A proposal has not yet been provided
$250 USD in 3 days
5.0 (3 reviews)
3.7
3.7
User Avatar
Hello. I found your project interesting. As i can understand it might be some kind of shield for Teensy ? I can produce accurate design with 3D prototype of PCB. I also can make panellized board for mass production. If you have any question please ask.
$166 USD in 7 days
5.0 (10 reviews)
3.7
3.7
User Avatar
Hello, i am interested in your job. write me for more info. your project is easy, so i will be able fast for you.
$200 USD in 7 days
4.1 (3 reviews)
3.5
3.5
User Avatar
Hi there, we are Alate Infotech, we are new to freelancer, We are expert in both hardware and software development in field of electronics, having 2+ years of experience in circuit designing/debugging, coding, Matlab and various micro-controller and micro-processor based projects. Please do not hesitate to contact us to discuss your project in detail and determine how our skills will positively contribute to your team. Thanks.
$200 USD in 12 days
5.0 (1 review)
2.6
2.6
User Avatar
Good day! I am applying for this job because I think I have the skills to showcase in this project. I am a registered electrical engineer in the Philippines since last September 2014 and I am currently in Papua New Guinea for as a microcontroller programmer for a robotics initiative project. I'm looking for project which is inline of my expertise so that I can gain extra income since we're not be very busy until April. Regards, Teepu
$155 USD in 7 days
4.0 (1 review)
3.2
3.2
User Avatar
Hi, Please share schematics/connections, BOM and any placement/layout details(component, pcb size, etc). About us: We have 10 years of experience in Product development. Micro-controllers we can work on PIC, STM32 and AVR and also we have all the development kit and instruments available with us. For PCB design we use KICAD v4. And for GUI C# / LABVIEW will be used. Thanks and Regards, Santosh
$277 USD in 5 days
5.0 (2 reviews)
1.8
1.8
User Avatar
Hi. just design pcb with a couple components, this is an easy task for me. Feel free to contact me.
$200 USD in 2 days
5.0 (3 reviews)
1.3
1.3
User Avatar
I have work in different ARM architecture like v4/v4T(ARM7), Raspberry Pi, Anduino Nano,uno,mega Different Xilinx FPGA architecture(7 Series FPGAs,Kintex-7,Zynq-7000)
$66 USD in 3 days
4.4 (1 review)
0.8
0.8
User Avatar
hi, i am an electrical engineering student and have very good knowledge of arduino and pcb design ,here are some of my semester projects ,-> computer control robot using arduino and bluetooth, wireless data acquisition system using arduino, arduino radar, etc
$266 USD in 3 days
0.0 (0 reviews)
0.0
0.0

About the client

Flag of UNITED STATES
West Hollywood, United States
5.0
4
Payment method verified
Member since Jan 16, 2017

Client Verification

Thanks! We’ve emailed you a link to claim your free credit.
Something went wrong while sending your email. Please try again.
Registered Users Total Jobs Posted
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Loading preview
Permission granted for Geolocation.
Your login session has expired and you have been logged out. Please log in again.