Solidworks jobs


My recent searches
Filter by:
    Job State
    11,418 solidworks jobs found, pricing in SGD

    Hi, Are you lokoing for ongoing solidworks drafting work? I use SW21.

    $64 / hr (Avg Bid)
    $64 / hr Avg Bid
    1 bids

    Hi, are you interested in solidworks 21 drafting work?

    $41 / hr (Avg Bid)
    $41 / hr Avg Bid
    1 bids
    Screw conveyor 5 days left

    I want get full screw conveyor design ... Drawing file in pdf, part file in inventor or solidworks. Screw conveyor lenght 12.5m Inclination angle 22-28degree adjustable Capacity 2.2tph, bd of material 1.3 ton/m3. I need full details with calculation. Screw type trough. Please tell the cost of design and calculation. Please include any previous design for reff. Relevant work will be highly appreciated.

    $143 (Avg Bid)
    $143 Avg Bid
    13 bids
    Aerodynamics 4 days left

    I need someone who is good in aerodynamics and has hands on experience in solidworks.

    $28 (Avg Bid)
    $28 Avg Bid
    12 bids
    3d cad design 3 days left

    I have a product. I give the dimensions. I want to create 3d cad files, either in catia or nx or solidworks.

    $24 (Avg Bid)
    $24 Avg Bid
    88 bids

    Hi, I have an overflow of drafting work, all in Solidworks 21 if you are interested please let me know.

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    1 bids

    Hello, everybody. I need help in a urgent work. I am expert but have no time to do. So, I need assistance. If you are not Solidworks expert, please not bid. I am a specialist, too. Note: Bidder must have Solidowrks 2021 version. Thanks.

    $154 (Avg Bid)
    $154 Avg Bid
    16 bids

    Hi Ahmed E., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $270 (Avg Bid)
    $270 Avg Bid
    1 bids

    analysis on solidworks and computer design

    $175 (Avg Bid)
    $175 Avg Bid
    29 bids

    I have a very big obj file and want to convert it to SW file.

    $20 - $34 / hr
    $20 - $34 / hr
    79 bids

    We need someone to model our part library based off tech sheets and/or physical models. Must be able to use Solidworks 2019.

    $2549 (Avg Bid)
    $2549 Avg Bid
    93 bids

    Convert scanned data to editable 3D model in Solidworks and Geomagic Design X. Please quote

    $107 (Avg Bid)
    $107 Avg Bid
    29 bids

    Need to Create drawing template for A2, A3 & A1 sizes that can be changed to suit. All inputs will be provided. Insertion point, Anchor point and blocks to be managed. Custom properties from Part template to be linked on the drawing

    $97 (Avg Bid)
    $97 Avg Bid
    94 bids

    I need an artist who can make a 3D model of a custom design fork in STEP and STL files for prototype and manufacturing. I will provide drawings as well as a clay model of an approximate design. An artist should be able to have creative skills to complete the project in SolidWorks.

    $158 (Avg Bid)
    $158 Avg Bid
    58 bids

    I have a solidworks file in which I want few changes to be incorporated.

    $88 (Avg Bid)
    $88 Avg Bid
    54 bids

    I have a solidworks file in which I want few changes to be incorporated.

    $73 (Avg Bid)
    $73 Avg Bid
    43 bids

    Hello, We have a 3D Enclosure designed which would contain and house equipment and support structures which will weigh about 1 Tonnes, I am looking for someone who can determine the minimum required thickness of steel plate which will be used that will enable and withstand such a load , 3D file can be provided

    $51 (Avg Bid)
    $51 Avg Bid
    47 bids

    show specific works that are created with Solidworks I have an exact STL to be used as a reference but all modeling need to be done in SW the item below is similar to the model I want to make if you cant do curved and organic shapes in solidworks don't bid. I need someone that can get the job done in one day budget is 75$

    $725 / hr (Avg Bid)
    $725 / hr Avg Bid
    4 bids

    show specific works that are created with Solidworks I have an exact STL to be used as a reference but all modeling need to be done in SW the item below is similar to the model I want to make if you cant do curved and organic shapes in solidworks don't bid. I need someone that can get the job done in one day budget is 75$

    $108 (Avg Bid)
    $108 Avg Bid
    50 bids

    I need a design for a pickup tooling on a robot for a press machine. I attached the pictures of the tooling I want that is on another press machine and also the pictures of the new robot where I want the new tooling to go....I will provide all the measurements

    $243 (Avg Bid)
    $243 Avg Bid
    60 bids

    Our tasks include updating website content and writing technical blogs. In reality, this is a never-ending project. However, note - we are in a very technical industry, and our customers build satellites, missiles, aircraft, and other large DoD items. The writer must understand - we did not say use as per se' - but understand Catia - Siemens NX - PTC Creo - and Solidworks. You must also know what AM and DfAM even are. If you do, let us chat. We do not wish a highly technical paper on a subject, but something a builder of satellites might read in SME or Aircraft Design publications. To be clear, we are looking for a technical writer, not a CAD designer. An ideal user is the company/guy who uses Catia to build mechanical or Aerospace items. CAD / CAM Services is in the bu...

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    23 bids

    it is a multi-part gun design project, need to be dimensioned parts from Solidworks

    $185 (Avg Bid)
    $185 Avg Bid
    46 bids

    The project objective & requirement is to automate the production of conventional dimensioned floor plans, elevations and sections, from a user configured movable set of frames and movable assemblies in standard popular software, that will have these configurable frames & pre-defined assemblies set up in it. The project is to undertake the entirety of the above, design and set up everything in popular software, to enable a low-skilled user to readily produce the above architectural drawings. There are approximately 20 items in total – standard joists and columns, standard bolts and nuts, connectors, plates, a window unit and a floor unit that are moved and placed to create finished frames. The design of the software solution is to be: - Well designed quality solution tha...

    $2705 (Avg Bid)
    $2705 Avg Bid
    36 bids

    I require a 5 minute video to depict the surgical technique of a tibial implant based on SolidWorks drawings and anatomy graphics similar to this I work for a small medical device company who manufactures implants for leg surgeries. We have a pdf surgical technique guide that we want converted into video format for easy viewing by surgeons. We have engineers internally who are skilled with SolidWorks so we have all the drawings of our products but not of anatomy. There would be more similar projects in future.

    $1044 (Avg Bid)
    $1044 Avg Bid
    43 bids

    I'm doing a SimScale aerodynamics simulation to study the airflow behaviour around the 2022 F1 car model for a university final project. But before committing to meshing it and run the simulation successfully, firstly I need to do some CAD clean up on SOLIDWORKS and that's the tricky part where I get stuck as the overall geometry is quite complex and I don't have the necessary knowledge and skills to get all those geometry faults solved.

    $226 (Avg Bid)
    $226 Avg Bid
    31 bids

    So I have attached two files QMFS Solid-work lesson 1 and lesson 2 you just have to follow the steps and start with lesson 1 and then 2 and create it in a Solidworks software file so I can add and edit in future for more lessons. Any questions let me know.

    $24 (Avg Bid)
    $24 Avg Bid
    4 bids

    By using two main software. The first software is Solidworks to perform the 3D model of the landing gear and the second software is Ansys to perform the simulation and analysis. The simulation should achieve the following: 1. To test nose landing gear joint made from three different materials by applying a force during landing under static structural analysis in ANSYS. 2. To analyze the stress and strain of the different materials in landing gear joint.

    $247 (Avg Bid)
    $247 Avg Bid
    34 bids

    We are looking for someone to provide FEA modelling showing Max load which can be sustained under static and dynamic (as per image) We can provide more detail, including solidworks files etc. Products: Collapsible Double Width Transport Cage Overall dimensions: 2320x1160x1200mm Capacity: 1050kg I approx. 2m3 Stackable: 3 high loaded, 4 high empty,

    $383 (Avg Bid)
    $383 Avg Bid
    68 bids

    hi i need solidworks operator to edit in a STEP file the job will take 10 min to do details will be shared in PM

    $26 (Avg Bid)
    $26 Avg Bid
    91 bids

    I have a very big obj file and want to convert it to SW file. it is a simple converting.

    $11 - $20 / hr
    $11 - $20 / hr
    21 bids

    Design a simple frame to mount a mini shredder on the wall. Do simulations by using different materials.

    $61 (Avg Bid)
    $61 Avg Bid
    57 bids

    I am looking for an experience 2D / 3D draftsman/mechanical engineer to create a 2D and 3D designs of a concept tool - Angle protractor device. I have made some changes in the current design

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    65 bids

    Looking for an experienced product designer with knowledge of 3D CAD and CAM tools like Solidworks, Fusion 360, FreeCAD etc. To conceptualise and design children DIY educational kits, Board Games, Puzzles, Science & experiments toys, manage iterations, improvement based on product manager and customer feedback. He/She must be well versed with CAD/CAM processes, software and tools require to take the product from design stage to manufacturing stage using CNC machine , Laser cutters etc. Interested Candidates to share their past portfolio, along with their skills set and expected mode of engagement for the project. Please note this will be regular engagement and we are looking for candidate, who can work with minimal supervision and are self starter. Experience Required : 3+ ...

    $133 (Avg Bid)
    $133 Avg Bid
    13 bids

    Hi, Im Looking for someone who can help me design InSoles for A shoes and someone who can continue working with us for further alterations.

    $176 (Avg Bid)
    $176 Avg Bid
    88 bids

    We need a Solidworks model of a truck cabin - Just the cabin, no frame, wheels, engine or tyres etc. To create this model we shall supply the selected freelancer with a 2D DXF drawing (PDF version attached here for reference) and some photos. The overall dimensions of the cabin must be correct, but the details for door handles, window wipers etc. are not critical although they should appear visually correct when viewing the model. The model must be created as a native solidworks SOLID model. No surface models will be accepted. No models from other online resources (such as Hum3d) will be accepted. The model TOP plane must be aligned with the ground under the front wheel in the 2D drawing. The model FRONT plane must be aligned with the centre of the front w...

    $490 (Avg Bid)
    $490 Avg Bid
    77 bids

    This is a project to recreate a step file to generate a solidworks file and dxf files. Files to be sent once accepted.

    $38 (Avg Bid)
    $38 Avg Bid
    5 bids

    I need a 3D modeling for representing in 3D view the shark presented in the attached image, in specific softwares, like Autodesk Inventor (preferred) or Solidworks, or similar software that can export a solid model for both softwares.

    $57 (Avg Bid)
    $57 Avg Bid
    33 bids
    Trophy icon Cad solidworks Ended

    Use the four bar in the cad files below. Use washer, nuts, fastener and bearings See the files below.

    $14 (Avg Bid)
    3 entries

    Create 2d drawing for mold from a 3d solidworks file,. It is a very simple part and I request you download the art before contacting me about this job.

    $35 (Avg Bid)
    $35 Avg Bid
    22 bids

    We want to get a process plant layout made on Solidworks

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    35 bids

    Hi KALP, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

    $30 (Avg Bid)
    $30 Avg Bid
    1 bids

    someone required to make a solidworks model , very urgent.

    $39 (Avg Bid)
    $39 Avg Bid
    62 bids

    i required Chattarpati shivaji maharaj on horse 3d model in solidworks with wireframe mesh format file.

    $19 (Avg Bid)
    $19 Avg Bid
    7 bids

    A DC driven 4 wheel steering mechanism made using solidworks along with velocity and acceleration analysis

    $47 (Avg Bid)
    $47 Avg Bid
    20 bids

    FILES HERE We are looking to send this model to the machine shop. Output file should be ONLY ONE of these: STEP SOLIDWORKS IGES PARASOLID AUTODESK CATIA Looking for a 3D screenshot and a quick drawing. We will send the CAD file to the shop for machining. All dimensions are in mm. Material UHMW

    $41 (Avg Bid)
    7 entries

    I need to make 3 small corrections to a 3D step file. You need to be an expert using either Solidworks, Creo, NX or equivalent. Show me some few examples of your work. Thanks

    $108 (Avg Bid)
    $108 Avg Bid
    38 bids

    I'm looking for designer who can help me

    $146 (Avg Bid)
    $146 Avg Bid
    90 bids

    Hi yall I have designed a mould in Sketchup and want to remake it using CATIA/Solidworks or similar and get it in the STP/STEP/STL/3DXML Format It s a mould in two faces

    $21 / hr (Avg Bid)
    $21 / hr Avg Bid
    146 bids

    Attached is a Solidworks file that I need converted and saved as a STEP file. All design elements preserved and converted correctly. $10 maximum bid :)

    $14 (Avg Bid)
    $14 Avg Bid
    10 bids

    review the designed platform and extending beams and check for any errors. check for load capacity by analysis. do screen shots or results. check drawings for errors or spelling errors. mark up a PDF with any details that you find.

    $138 (Avg Bid)
    $138 Avg Bid
    12 bids