Plc scada jobs
Only For USA ( Texas preferable ) I need an experienced gas-turbine specialist who can log in remotely and walk me through diagnosing and correcting persistent startup problems and noticeable performance drops on one of our units. All symptoms point toward the control system, so I’m looking for someone who knows their way around typical turbine control architectures—think Mark VIe, PLC/SCADA integrations, sequencing logic, sensor calibration, and related HMI trending tools. Here’s what I expect once we begin: • A live remote session to review current alarms, trend data, and logic charts. • Clear, written recommendations (and if possible, revised logic files) that get the machine through a reliable start and restore baseline performance. ...
Category/Skills tags: Modbus, SCADA, Industrial Automation, Python, Node.js, IoT, PLC, Web Development Description: I need a lightweight Modbus TCP device simulator with a web-based control panel, used to test SCADA/automation software without real hardware. Core requirements: Modbus TCP server simulating up to 20 configurable tags (temperature, tank level, pump status, valve position, etc.) with both read and write support (holding registers, coils, etc. as appropriate). Must work with standard Modbus client tools (e.g., Modbus Poll, pymodbus client, QModMaster). Web control panel showing all tag values live — sliders for numeric tags, toggle switches for on/off tags. Changes from a Modbus client must reflect on the web page instantly, and vice versa (bidire...
...user interface. * Prepare the project so it can later be connected to PLC/SCADA tags. At this stage, **PLC communication is NOT required**. The focus is on the HMI interface and navigation. ## Remote Development Requirement The project **must be developed directly on my computer** using remote access software such as **AnyDesk** or **RustDesk**. The AVEVA Edge project must remain on my computer at all times. Remote development is mandatory. ## Requirements * Proven experience with AVEVA Edge. * Experience developing industrial HMI/SCADA applications. * Strong UI/UX skills for industrial control systems. * Good English communication. * Ability to follow an existing design accurately. ## Nice to Have * Experience with PLC integration. * Experienc...
I'm seeking an experienced Allen-Bradley PLC programmer for a manufacturing process application. The PLC will primarily be used to monitor sensors and alarms. Key Requirements: - Expertise in Allen-Bradley PLCs - Experience in manufacturing process applications - Ability to program PLCs for monitoring sensors and alarms Ideal Skills: - Proficiency in ladder logic and other programming languages - Familiarity with industrial sensors and alarm systems - Strong troubleshooting and problem-solving skills Please include your relevant experience and approach to the project in your bids.
*AI-Driven Digital Twin Framework for Integration Analysis of Solar-Powered Electric Vehicle Charging Stations in Smart Distribution Networks* AI-Driven Digital Twin Framework for Solar-Powered EV Charging Stations in Smart Distribution Networks P...at 34.5 kV / 0.4 kV with rooftop solar and EV charging infrastructure. Problem Statement Large campuses and industrial facilities are rapidly deploying: Solar PV EV Charging Stations Battery Storage Smart Buildings However, transformer overloading voltage fluctuations reverse power flow peak demand charging congestion renewable intermittency make network operation difficult. Traditional SCADA systems cannot predict these conditions. Therefore, an AI-based Digital Twin is developed to perform predictive analysis and intelligent s...
...utilities • Certifying that the installed system meets all relevant performance and safety standards • Coaching local technicians so they can run, service and troubleshoot the plant independently after we leave You will coordinate logistics, manage vendors, supervise on-site works and document all procedures. Familiarity with anaerobic digesters, gas cleaning, flare or CHP units and basic SCADA controls is important so that training remains practical and equipment sign-off is straightforward. Final acceptance rests on a commissioned plant that passes certification tests and a trained local team able to demonstrate start-up, routine operation and shutdown without assistance....
...should guide the design. Scope of work • Produce feeder, grounding and protection single-lines that show all three assets and their point of common coupling. You can use the atatched file as a guide and needs to closely match it • Size cables, switchgear and protective devices, integrating manufacturer-specific data from my spec sheets. • Define control wiring and network topology so the plant SCADA can dispatch solar, battery and engines in concert. • Deliver load-flow, short-circuit and arc-flash studies (ETAP or SKM models are acceptable). • Generate a drawing set ready for permit submission in native AutoCAD plus searchable PDF. Acceptance criteria Drawings must reconcile with the provided specifications without deviations, pass a peer ...
Business Idea: SkillConnect – On-Demand Skilled Manpower Platform Vision To solve the manpower shortage in Waluj MIDC by connecting industries, factories, and local shops with verified skilled workers available for daily, temporary, or contract work. How It Works For Companies and Shops - Register on the app. - Select the required skill (Electrician, PLC Technician, Welder, Fitter, Helper, Machine Operator, CNC Operator, Forklift Driver, etc.). - Choose the number of workers and the duration (1 day, 1 week, or longer). - View worker profiles, experience, ratings, and daily charges. - Confirm the booking and make payment. For Workers - Create a profile with skills, experience, certificates, and location. - Upload identity documents. - Accept or reject job requests. - Rec...
...selection and integration of servo drives, proportional valves, sensors, and human–machine interface (HMI) components. **Key Responsibilities** * Design and integrate motion control hardware and feedback systems, including encoders and transducers. * Develop control strategies for precise, repeatable pipe bending operations. * Collaborate with internal teams responsible for 3D mechanical design and PLC programming. * Specify and commission HMIs that enable intuitive, programmable machine operation. * Support testing, troubleshooting, and final machine commissioning. **Qualifications** *Familiarity with motion control systems for industrial machinery. * Familiarity with servo systems, hydraulic proportional control, PLCs, and HMIs. Interested candidates should submit a...
...building-management installation and need a complete PLC-based electrical panel design dedicated to the HVAC side. The controller will run our chiller plant and the MCC that drives all circulation and condenser pumps, so the drawings must reflect real-world motor loads, interlocks, and safety devices rather than generic templates. Here’s what I’m after: • A full set of single-line and wiring diagrams, clearly showing every I/O point needed for temperature, flow and pressure feedback, as well as the hard-wired links to the pump starters in the MCC. • Panel layout and bill of materials, sized to house the PLC, power supplies, contactors, overloads and field terminals without overcrowding. • I/O list in spreadsheet form that I can import stra...
I need help with a ladder lab exercise on PLC programming. The exercise involves using Allen-Bradley RSLogix 5000. Ideal Skills and Experience: - Proficiency in PLC programming, especially with Allen-Bradley - Strong understanding of RSLogix 5000 - Experience with ladder logic design and troubleshooting - Background in automation or control systems Please provide a brief overview of your experience with similar tasks.
I need a skilled instrument technician to service Radar level transmitters, level switches and other field instruments and integrate Siemens PLCs with these sensors in the USA Key Tasks: - Install, maintain, and calibrate capacitive level sensors - Program and integrate Siemens PLC with level sensors Ideal Skills and Experience: - Proficiency with capacitive level sensors - Experience in Siemens PLC programming and integration - Strong background in instrument installation, maintenance, and calibration
I need a complete dashboard built in Mitsubishi GraphW...single Dashboard view populated with: • Graphs and charts • Indicators and gauges • Data tables I will supply the tag list and data source details; you handle the screen layout, bindings, and any scripting required inside GraphWorX. Please organise objects with clear naming conventions so future edits are straightforward, and optimise refresh rates to keep latency low without overloading the PLC or network. Deliverables • GraphWorX project file (.gwx) with all assets embedded • Any external script files if used • A brief hand-off note explaining data connections and how to add new tags I will test the build on our plant PC; once the dashboard updates accurately for at least one full...
We are looking for an experienced COPA-DATA zenon SCADA developer for a pharmaceutical automation project. The project involves upgrading an existing HMI system to a zenon SCADA solution with support for FDA 21 CFR Part 11 compliance. Scope of Work: • Develop a zenon SCADA application from project specifications. • Configure communication with the existing PLC. • Design professional SCADA screens. • Configure alarms, trends, and historical data. • Implement user management and role-based access. • Configure audit trail and electronic signatures. • Configure recipe management (if required). • Generate reports and event logs. • Support FAT and debugging. • Provide complete project source files and d...
I'm seeking a skilled professional to analyze and implement a data acquisition and monitoring system using the Siemens SIMATIC S7-1200 PLC and LOGO!. The primary goal is to retrieve and monitor data from: -the SD memory (for SIMATIC S7-1200) -LOGO! memory. Key Requirements: - Expertise with Siemens S7-1200 PLC and LOGO! - Ability to retrieve and interpret SD memory data Ideal Skills and Experience: - Siemens PLC programming - Knowledge of data monitoring tools - Problem-solving skills Please provide a detailed plan and timeline.
...IEC60870-5-104 telemetry stack to build and fine-tune a Windows-based server that will stream real-time data from our power-plant generators. The job is centred on live monitoring, so low latency, reliable packet handling and solid time-stamping are critical. You will install, configure and secure the server, connect it to the existing generator IEDs, and prove that the data flows continuously to the SCADA front-end without drops or mismatches. Please include parameter tuning (t0, t1, t2, k, w, etc.), TLS or VPN set-up if you normally deploy it, and clear operator documentation. Acceptance criteria • Generator measurements visible on the supervisor console with ≤1 s delay • All test points pass IEC conformance diagnostics and survive a 48-hour soak • Han...
...SEW DHR21B card used to exchange data in both directions with an Omron CJ2M-CPU33, but since the drive was reset to factory settings the PLC can only read; every write attempt is ignored even though no error messages appear on either side. I can connect through both MOVITOOLS and CX-Programmer / Network Configurator, and I’ve already gone through the obvious network parameters yet I’m still not fully confident they match on both ends. Remote access to the on-site PC (and therefore to the live hardware) is ready whenever you need it for tracing, packet captures or online edits. What I need from you is a clear diagnosis of why the outbound data from the PLC is no longer being accepted by the drive, plus the corrections implemented and documented so the link...
I need a modular PLC program for a CNC machine with a Fanuc 0i-MF controller. Requirements: - Tool changer - Head changer - Material handling - Safety interlocks - Initial setup - Operational controls - Diagnostics and troubleshooting Ideal Skills and Experience: - Proficiency in Fanuc PLC programming - Experience with CNC machine controls - Strong understanding of safety protocols and interlocks - Ability to work with provided full documentation
...Engineers for Internal Roads and Access Roads • SCADA / CCTV Specialists for solar PV projects The scope may include technical document review, AutoCAD drawings, electrical or civil calculations, basic/detail/construction engineering documentation, deliverable review, material take-offs, and support with technical comments. Requirements: • Proven experience in utility-scale solar PV projects • Ability to work remotely • English and/or Spanish technical documentation skills • AutoCAD, Excel, and discipline-specific engineering tools • Availability to work hourly or by work package • Ability to meet deadlines and deliver clear technical outputs Experience with Civil 3D, PVcase, ETAP, DIgSILENT, PVSyst, QGIS, BESS, substations, transmission lin...
Our manufacturing line in Malaysia is running on a Siemens PLC paired with a SCADA package that is already installed but only partly commissioned. I need an experienced Siemens specialist who can work in-person at the plant (no remote connection possible) for a short, offline engagement to get everything running smoothly. You will be expected to: • System troubleshooting and diagnostics – quickly identify faults on the existing I/O, drives and network, then verify stable operation. • PLC code development and updates – refine or rewrite the STEP 7 / TIA Portal logic so it matches the current process requirements, and leave commented, organised code. • SCADA system configuration – finish the WinCC screens, tags and alarms so ...
...that I am assembling in my workshop. The schematic must show every conductor, terminal, and protection device so an electrician can install and troubleshoot the system with confidence. Please include: • Power supply connections – incoming mains, isolation switch, fusing or breakers, and earth/ground paths • Control panel wiring – relays, contactors, temperature sensors, indicator lights, and any PLC or timer points • Safety mechanisms – emergency-stop loop, over-temperature cut-outs, interlocks for the distillation chamber, and grounding/bonding details Deliver the drawing in both PDF and the native CAD format you use (AutoCAD, EPLAN, or similar). Label all components, wire sizes, and color codes to meet standard residential practices. A b...
...need help creating a solid, production-ready program for a BRX PLC, model BX-DM1E-36ER3-D, that will interface with an SV2A-2040 drive. This is strictly a software-side assignment—no hardware wiring or panel design—so the focus is on writing and validating the PLC logic. Scope • Build the main ladder (or structured text, if you recommend it) in Do-more Designer so the PLC can read / write all required I/O, execute the drive commands, and manage basic fault handling. • Provide a clearly commented program file plus a short PDF or Markdown note explaining the tag list, state flow, and any parameters I may need to tweak on site. • Be available for one remote test session to step through the logic live with me; I can share the PLC...
...PDF submissions. - Deliver a complete as-built DWG package and a matching PDF drawing set. - Produce clean, organized CAD file structure with layers, Xrefs, and standards. REQUIRED EXPERIENCE: Experience drafting in AUTOCAD Experience with Civil / Site Plans Experience producing record drawings / as-builts PREFERRED EXPERIENCE: Industrial / utilities / wastewater projects Electrical and SCADA layouts NOTE: Candidate MUST SPEAK, READ and WRITE ENGLISH FLUENTLY. Project Duration Maximum of 2 weeks. Reynolds would like to set up meetings prior to start to ensure a mutual understanding of project scope, project timeline, answer any questions contractor may have etc. We will provide all related documents to this project per request. Price may be flexible relating to contra...
...prepared by our design consultant for a 6 MW AC grid-connected solar power project under HESCOM (Karnataka). **Scope of Work:** - Review overall plant layout and optimization. - Verify DC and AC system design. - Review string sizing and inverter loading. - Check module layout and AC/DC ratio. - Review cable sizing, voltage drop, and routing. - Verify earthing and lightning protection design. - Review SCADA and communication architecture. - Check structural and mounting system drawings. - Examine single line diagrams (SLDs). - Ensure proper protection philosophy and equipment selection. - Review 11 kV evacuation system, switchyard, and interconnection design. - Assess civil layouts including internal roads, drainage, and fencing. - Identify design deficiencies, optimization oppor...
I need a skilled programmer to create an HMI and PLC program for a Mitsubishi system. The setup includes 100 digital inputs, 100 digital outputs, and 15 analog inputs. The primary goal is monitoring and control, with data types as required. Key Requirements: - Experience with Mitsubishi HMI and PLC programming - Familiarity with environmental engineering applications - Ability to implement robust monitoring and control systems Ideal Skills and Experience: - Proficiency in PLC programming languages - Knowledge of environmental data parameters - Strong problem-solving and system integration skills Please provide relevant experience and approach in your bids.
I run a production site equipped with three-phase motors, PLC-controlled panels, variable-speed drives and high-power distribution boards. To keep everything operating safely and with minimal downtime, I need an electrotechnician who can take charge of maintenance on these industrial systems—from drafting a preventive plan to hands-on fault-finding, component replacement and efficiency-boosting upgrades. You should be fully at ease with industrial-grade wiring, control circuits, protective relays and the usual diagnostic tools (Fluke meters, insulation testers, thermal cameras, PLC software). Knowledge of NF C 15-100 or equivalent IEC standards and strict adherence to lock-out/tag-out procedures are essential. When you respond, focus on your experience with comparable...
I need a skilled programmer to create an HMI and PLC program for a Mitsubishi system. The setup includes 100 digital inputs, 100 digital outputs, and 15 analog inputs. The primary goal is monitoring and control, with data types as required. Key Requirements: - Experience with Mitsubishi HMI and PLC programming - Familiarity with environmental engineering applications - Ability to implement robust monitoring and control systems Ideal Skills and Experience: - Proficiency in PLC programming languages - Knowledge of environmental data parameters - Strong problem-solving and system integration skills Please provide relevant experience and approach in your bids.
I need a functional PLC-based simulation that accurately represents a conveyor system
I’m building a browser-based system that can read live values from several PLCs and scattered IoT sensors, show those readings instantly on a clean dashboard, and let authorised users push simple control commands back to the field. Think of it as a lightweight SCADA layer that runs entirely over the web. The app must: • Connect simultaneously to traditional PLCs and modern IoT devices—whatever protocol you prefer, as long as updates arrive in roughly one-second intervals or faster and command acknowledgements are rock-solid. • Store each data point so I can trend, search, and export history later; a time-series database such as InfluxDB or TimescaleDB is fine, but I’m open to other suggestions. • Stream readings to the UI in real time (WebSockets, M...
...rails and replace them with a compact positioning system. Scope of Work • Mechanical design of compact 2-axis system • Mounting concept for pick opening • Modular approach • Simple enclosure (low IP requirements) • Servo-based positioning system • Fast and smooth motion • Single-point laser system • Microcontroller-based control (Arduino or similar) • Integration with existing PLC commands (activation, referencing, position, velocity, limits) • Control software, motion smoothing, and geometry compensation • Calibration method for accurate positioning Key Requirements Working area: up to 4000 × 820 mm Accuracy: ±20 mm Speed: full travel within ~2 seconds Environment: indoor, low dust, ...
My tmachine runs on a Siemens PLC and Omron servo drives. During the homing routine the X-axis servo no longer responds, even though the other axes behave normally. It used to move without any problem and I have not touched either the hardware or the software since the last successful run. I’m looking for someone who can jump on a quick remote session, go through the PLC program, the axis parameters and any relevant alarms, and pinpoint why the motor doesnt move. I also can share electrical diagram. I’ll provide the program files, drive parameter screenshots and live video of the machine so you can confirm the fix. Once the motor homes reliably, the job is done.
...Information and give me a actual price. If your plan is to increase the price after please do not reply. This is the exact information and its not a difficult page. No online sales just a landing page on wix for lead generation. Thanks 1. Hero Section (Above the Fold) Strong headline + sub-headline (use suggestions above) High-quality hero image: Professional control panel (open view showing PLC, relays, and clean wiring) or modern installed HVAC/building automation system Two clear CTAs: Request a Custom Quote (primary) See Flexible Options (secondary – scrolls to the options section) Trust bar: Innotech • Belimo • “Parts • Pre-Programmed • Complete Panels” 2. Flexible Purchasing Options (Very Important – Place this early and make...
... - Deliver a complete as-built DWG package and a matching PDF drawing set. - Produce clean, organized CAD file structure with layers, Xrefs, and standards. REQUIRED EXPERIENCE: Experience drafting in AUTOCAD Experience with Civil / Site Plans Experience producing record drawings / as-builts PREFERRED EXPERIENCE: Industrial / utilities / wastewater projects Electrical and SCADA layouts NOTE: Candidate MUST SPEAK, READ and WRITE ENGLISH FLUENTLY. Project Duration Maximum of 4 - 5 weeks. Reynolds would like to set up meetings prior to start to ensure a mutual understanding of project scope, project timeline, answer any questions contractor may have etc. We will provide all related documents to this project per request. Price may be flexible relati...
I need a seasoned PLC developer to build a library of modular, fully-commented control programs that run flawlessly on both Siemens (TIA Portal and LOGO!) and Allen Bradley/ Rockwell (CCW) hardware. Each block should drop straight into a new project, adapt quickly to different I/O counts, and preserve three core benefits I must have: easy customization, noticeably improved functionality, and measurable efficiency gains. Here is the scope in more detail: • Write, test, and document reusable ladder or structured-text routines for common control-panel tasks—motor starts, VFD control, alarm handling, PID loops, network comms, HMI tag mapping, etc. • Validate code against wiring schematics, P&IDs, sequence charts, and any functional-design specs I supply. •...
I'm seeking an experienced professional to develop an industrial process simulation of a manufacturing assembly line using Siemens Simatic PLC software. Key Requirements: - Expertise in Siemens Simatic - Experience with industrial process simulations, specifically for manufacturing assembly lines - Ability to create realistic and functional simulations Ideal Skills: - Proficiency in PLC programming and simulation - Familiarity with manufacturing processes and assembly line operations - Strong problem-solving skills and attention to detail Please provide a portfolio or examples of similar work done.
...render (which I will share as soon as we start) already shows the overall layout, so you can focus on translating it into a clean, animated sequence rather than modelling ultra-fine details. Process to visualise, in order: • 3-step sedimentation tank • Activated-sludge tank with recirculation tube and a single sensor • Constructed wetland bed • Control panel housing an air compressor and PLC • Final collection tank with pump and sensor Keep component geometry to basic detail—simple shapes, clear colours, no micro-piping or bolts—so the viewer’s attention stays on how water moves and changes from stage to stage. Each stage should appear, animate, and label itself before the camera glides to the next, making the treatment flow...
...directly into the Siemens IPC427E and stream its sensor readings—temperature, pressure, and humidity—in real time. The controller is already deployed on the production floor; my goal is to capture those values continuously and expose them to an external application where they can be logged, visualised, and analysed. A working solution will: • Connect to the IPC427E without disrupting existing PLC logic. • Pull temperature, pressure, and humidity values as they change (sub-second latency preferred). • Forward or publish the data through a standard interface such as OPC UA, MQTT, REST, or a lightweight TCP socket—whichever you deem most robust for 24 × 7 operation. • Include a concise set-up guide detailing configuration inside T...
... and documenting the system. Scope of work • Translate my functional goals for the automation system into a detailed instrumentation specification. • Recommend and size field instruments (flow, level, pressure, temperature, etc.) that align with industry standards and site constraints. • Prepare wiring diagrams, loop sheets, and I/O lists ready for integration with the control system (PLC/SCADA). • Support calibration and commissioning remotely (or on-site if practical), ensuring each loop performs to spec. What I’ll provide • Process descriptions, P&IDs, and any existing control philosophy. • Access to our engineering team for quick clarifications. Acceptance criteria • All instruments identified, tagged, and...
...sequence -Select controller platform -Define I/O list -Define architecture -Define communication philosophy Phase 2 – Hardware Selection -PLC selection -PC interface selection -Stepper driver selection -Sensor selection -Power supply sizing -Pneumatic component review Phase 3 – Controls Design -I/O mapping -Tag list -State machine -Interlocks -Fault matrix Phase 4 – Programming -PLC code -PC interface software -Modbus configuration -Motion setup Phase 5 – Electrical Design -Panel layout -Wiring diagrams -Terminal schedule -Power distribution Overview: A prototype including stepper motors, sensors and limit switches 24VDC. requirement to program, PLC, mapping, make ready to apply industry 4. in the future. Motor drivers and all compon...
We operate a fly ash brick manufacturing plant. Bricks are produced by a brick machine and come out on steel plates/pallets containing approximately 10–12 bricks per plate. Currently, workers manually pick up these plates using c...• Battery-powered system preferred. • Safety sensors and obstacle avoidance. • Complete mechanical, electrical, and software design required. Please include in your proposal: Relevant AGV/robotics/automation experience. Photos/videos of similar projects. Suggested technology (PLC, ROS, Arduino, Raspberry Pi, etc.). Estimated development cost. Estimated timeline. Whether you can provide prototype and final implementation support. Preference will be given to candidates with industrial automation, robotics, AGV, AMR, PLC, and mate...
I’m ready to expand our Siemens WinCC Explorer setup with three new report packs—CIP, Product, and Audit—so that our operators and quality team can stop exporting raw tags by hand and start relying on auto-generated PDFs/Excel directly from the SCADA database. For the CIP area I need each report to summarise cleaning efficiency, chemical usage, and full cycle time, broken down by line and date so we can trend performance against our validation limits. Product reports must capture production volume, product quality metrics, and full batch records pulled from the historian so that QA can sign off without cross-referencing paper logs. Finally, an Audit report has to log user actions, set-point changes, and alarm acknowledgements for compliance reviews. Deliverab...
I need an experienced controls technician to complete all on-site field wiring for a Siemens S7-1500 PLC panel that will operate in an indoor environment. The cabinet is already mounted and the devices are in place; what remains is terminating the incoming power feeds, I/O, network cabling, and field instruments, then powering up and testing. Scope • Dress, cut, and terminate all wires inside the panel, keeping routing clean and fully labelled to Siemens standards. • Land field cables on terminal blocks and the S7-1500 modules, following the provided wiring schedule. • Perform continuity and insulation checks, power-up verification, and I/O point-to-point testing with me present. • Update the as-built schematic with any field changes before handover. You ...
I’m building a comprehensive Intouch SCADA application for a manufacturing line and need a seasoned developer to take it from concept to a fully tested runtime project. The scope is roughly 150 operator-friendly screens that deliver seamless real-time data monitoring, robust alarm management, and detailed historical data logging. The plant’s PLC infrastructure will supply the field data, so every tag, alarm, trend, and script must integrate cleanly with those controllers. I will provide PLC tag lists, P&IDs, and naming conventions; you will configure the Intouch tag database, create graphic templates, and wire up communications. Key expectations • Screens: about 150, laid out logically by area (raw material, process, packaging, utilities, etc.)...
...rather than a full-blown industrial line. Here’s what I’m counting on you to handle from concept to commissioning: • Process design sized for ≤ 100 kg/day of mixed biomass • Detailed mechanical drawings, P&ID, and a complete bill of materials • Fabrication or clear fabrication instructions for reactor, condenser train, and ancillary equipment • Integrated heating and basic control scheme (PLC or Arduino-based is fine as long as temperature is held reliably) • Factory acceptance test showing steady production of bio-oil, plus a short run-up guide I can follow on site Key points you should factor in: fast or slow pyrolysis is acceptable as long as bio-oil yield is maximized; char and syngas can be considered by-products but d...
...replace an existing Siemens WinCC SCADA layer. The system operates a large kinetic retractable shade canopy with approximately 30 independently-driven axes. This is a software-only engagement: all field equipment stays in place and unmodified, and is integrated with solely via the existing PLC. The site is in the Gulf / Middle East region; exact identity is shared only with shortlisted bidders under NDA. What we need A new application that runs on the existing on-site industrial PC (no new production hardware) and communicates with the PLC over Ethernet using the S7 protocol (e.g. a snap7-class library), reading and writing an agreed tag set — possibly via a non-optimised "mirror" data block. The existing automation comprises a Siemens S7-300 fail-...
I need support with a PLC control project in CODESYS 3.5. The task is to create a simple and understandable sequential control program for a chemical mixing tank / dissolver system The solution should be clean, well-structured, and easy to understand. It should be suitable as a small PLC demonstration project and should clearly show the step-chain logic, the input/output structure, and the control sequence.
I need an experienced controls engineer who can design and implement an Allen-Bradley PLC-based control system for a semi-automated production line at our New Jersey site. The focus is on reliable material-handling and packaging operations that tie smoothly into the machines already on the floor. Here’s what I’m after: • Create robust control logic in Allen-Bradley hardware (CompactLogix or ControlLogix preferred) that coordinates conveyors, actuators, sensors, and safety devices. • Build a clear, operator-friendly HMI that presents real-time status, alarms, and recipe management with minimal training required. • Integrate the new code with the existing machinery so startup and changeovers are fast and painless. • Deliver complete documentation...
I'm seeking an experienced controls engineer to design and implement a PLC-based control system for a semi-automated production line. The system will primarily manage material handling and packaging processes. Key Requirements: - Design control logic using Allen-Bradley PLCs - Integrate with existing machinery for seamless operation - Develop user-friendly HMI interfaces - Provide detailed documentation and support during installation Ideal Skills: - Proficiency in Allen-Bradley PLC programming - Strong background in industrial automation and controls - Experience with HMI development - Excellent problem-solving skills Please include examples of similar projects in your bids. Looking forward to your proposals!
I need support with a PLC control project in CODESYS 3.5. The task is to create a simple and understandable sequential control program for a chemical mixing tank / dissolver system The solution should be clean, well-structured, and easy to understand. It should be suitable as a small PLC demonstration project and should clearly show the step-chain logic, the input/output structure, and the control sequence.
