Need to find a structural engineer not too expensive for a small job in alexandria nsw australiawhere do i start jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    14,154 need to find a structural engineer not too expensive for a small job in alexandria nsw australiawhere do i start jobs found, pricing in SGD

    Need engineer for a 14kw solar ground mount project in California. Need both electrical and structural engineering. County will need some items of the property on the plan set. Will send their application for your review.

    $3049 (Avg Bid)
    $3049 Avg Bid
    7 bids

    1- Experience in process designing 2- Experience on process deliverable and simulations 3- Experience in Heat & Material balance 4- Experience in Material Take Off (MTO) , bill of quantities (BOQ) and specifications

    $1154 (Avg Bid)
    $1154 Avg Bid
    13 bids

    1- Experience in process designing 2- Experience on process deliverable and simulations 3- Experience in Heat & Material balance 4- Experience in Material Take Off (MTO) , bill of quantities (BOQ) and specifications

    $1369 (Avg Bid)
    $1369 Avg Bid
    4 bids

    Hi I am a structural Engineer who looks for a person good in writing for making my chartered application Basically I will give acess to the clawd of the company so he/she could pick up the right info I also have an applicant example to follow the sequence The person needs to be good at english once the ...

    $211 (Avg Bid)
    $211 Avg Bid
    24 bids

    Need help moving from Burwood NSW 2134 to Redfern NSW 2016 on Saturday 21st July. Morning is preferred. A van & 2 removalists will be required to move: - 2x bed frames (38kg each, but in separate boxes so around 20kg per box) - 2x mattresses (new & in a compressed box) - 1x coffee table - chairs - 15x boxes - heater - other

    $30 - $253
    Local
    $30 - $253
    0 bids

    Hi Freelancers, I am looking for quick turn around Reinforced concrete structural designers and reinforcement drafters to design and draft UG tanks. further details will be provided to the selected freelancers.

    $32 (Avg Bid)
    $32 Avg Bid
    23 bids

    ...looking for a certified structural engineer to create footing and structural drawings that will pass certification in Australia for a 4m high piece of public artwork constructed from Aluminium. The work will then be checked by an Australian engineer and mark ups sent back for revision. Pictures are attached in ...

    $170 (Avg Bid)
    $170 Avg Bid
    22 bids
    Design project 5 days left

    I need a 3D model of something. Designing on SOLIDWORKS, Inventor, AutoCad Modeling, complex parts structures, Weldments, Structural Design.

    $30 (Avg Bid)
    $30 Avg Bid
    13 bids
    Write some software 5 days left
    VERIFIED

    I need you to develop some software for me. I would like this software to be developed for Windows using PHP. data entry forms crystal report web services one way interface with MAXiMoprefer freelancer from alexandria city of egypt

    $196 (Avg Bid)
    $196 Avg Bid
    12 bids

    Hey, I need you to make me a mesh in Ansys structural for a boat hull. The boat hull is a shell with patterned infill inside. The infill is the reason I am finding it tough to mesh it. I am also in a time constraint. Please reply if you think you can do it. Thank you. Jayanta

    $26 (Avg Bid)
    $26 Avg Bid
    16 bids

    Need Architecture, Structural design for a independent residential house (G+1)(in 150 Sq Yds.), in Hyderabad, Telangana India.

    $157 (Avg Bid)
    $157 Avg Bid
    13 bids

    I require a structural steel draftsperson to complete shop drawings for a job with existing drawings. You will have your own Advanced Steel (or Tekla??) program that will allow you to create NC drawings AND materials lists (optional) ****YOU MUST BE AVAILABLE TO START RIGHT AWAY***** The role will require you to make t...

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    17 bids
    Trophy icon Create a logo for a non profit 1 day left

    ...been set up by the Kids Cancer Alliance to facilitate bringing together discoveries from across NSW. KOALA is a Clinical Trials Centre for Childhood Cancer, based within the Kids Cancer Centre, Sydney Children’s Hospital, Randwick. It functions as a central clinical trials office for paediatric oncology trials with a particular emphasis on ...

    $75 (Avg Bid)
    Guaranteed
    $75 Avg Bid
    170 entries

    Structural engineer with tekla structures experience needed for on going job

    $1170 (Avg Bid)
    $1170 Avg Bid
    19 bids
    $420 Avg Bid
    18 bids

    I need 100-300 sets of small plans for garages and pole barn for sale in the U.S. Each plans set is 6-8 sheets. It includes architectural, structural, electrical. We also need 3D architectural renderings.

    $5 / hr (Avg Bid)
    $5 / hr Avg Bid
    1 bids
    Help Me Move 4 days left
    VERIFIED

    Need help moving from Burwood NSW 2134 to Redfern NSW 2016 on Saturday 21st July. Morning is preferred. A small van & 2 removalist will be required to move: - 2x bed frames (38kg each) - 2x mattresses (new & in a compressed box) - 1x coffee table - chairs - 15x boxes - heater - other small items

    $112 (Avg Bid)
    Local
    $112 Avg Bid
    1 bids
    Civil_Building_demolition01 3 days left
    VERIFIED

    ...the demolition of the structure. 2. A detailed description of the type of structure including structural elements of walls, roof and windows. 3. A detailed scope of demolition for the project. 4. A checklist of items required to be completed prior to the demolition. 5 Identifying what technique would be used for the demolition and why. 6 T...

    $126 (Avg Bid)
    $126 Avg Bid
    10 bids
    Trophy icon business card logo 3 days left

    I need a logo for business cards, brochures and signs. I am a licensed Massage Therapist. LMT. I specialize in Therapeutic Body Work and Structural Energetic Therapy. I would like to use purple on my cards and I would also like to use metallics, like a gold metallic, or copper metallic on my bu...

    $68 (Avg Bid)
    Guaranteed
    $68 Avg Bid
    61 entries

    We have a project where we are communicating with a "Black Box". Before we can communicate with it, the Box sends us a 2-byte token to which we have to respond. The response we send is based on the token the Box sends us. We don't know what the algorithm is that’s used to generate the response. The task is to reverse enginee...

    $1339 (Avg Bid)
    $1339 Avg Bid
    10 bids

    We need an engineer to help us in a court case buy researching the existence of a particular product and giving their professional opinion on it. Only needed for 1 day.

    $29 / hr (Avg Bid)
    $29 / hr Avg Bid
    35 bids

    Simple editing of a business card using the Indesign File. The logo on the back of the current card should be swapped for the attached logo. 1ICON only! Not the * or the text “representing the one” Card color stays the same. card size stays the same. If the font is not supplied then choose a font nearest to the font used on the card. The deta...

    $22 (Avg Bid)
    $22 Avg Bid
    71 bids

    I need to get a set of drawings stamped for approval. The project is a set of monkey bars for a gym that is being hung from the exposed structural roof beams W10x26 and then tied in to 4 1/2" round columns with clamps. Thanks

    $215 (Avg Bid)
    $215 Avg Bid
    25 bids
    data entry clerk 2 days left

    A confident, competent and imaginative interior designer with extensive experience of working on a mixture of projects. Having an excellent commercial approach to solving problems and a proven ability to generate fresh solutions for the renovation of internal spaces,including structural alterations. An ambitious, creative and dedicated design p...

    $117 (Avg Bid)
    $117 Avg Bid
    21 bids
    Project for Bahaa/Kariman 1 day left
    VERIFIED

    Design a steel building structure: > 5 level building (ground floor + 4 story) - top story ends with horizontal concrete slab. > Level 1: 3.5m; Level 2-5: 3m; > 596 square meters footprint > slab is 579mp. 100mm walls go on the side of the slab, not on top of it. walls are made from horizontal panels. > floor blueprint: [login to view URL]

    $949 (Avg Bid)
    $949 Avg Bid
    6 bids

    I want somebody able to do paraphrase, Reword, Restructure and Rewrite in materiel , structural and mechanical field. Research writing ... prefer someone engineering background.

    $50 (Avg Bid)
    $50 Avg Bid
    52 bids

    i need a tree structure designer

    $23 (Avg Bid)
    $23 Avg Bid
    4 bids

    ...detached garage had a foundation extension added to it while other work was performed on the grounds of the house where garage is located with the intension of a future addition. extension 20' wide by 21', was limited to the installation of footings and retaining walls. The ground on which foundation extension was installed consists of a marginal i...

    $561 (Avg Bid)
    $561 Avg Bid
    10 bids

    Dear All (You must live in Sydney NSW to do this JOB) We are looking for an enthusiastic sales, marketing or business person with keen professional interests to approach nursing homes in Sydney for pharmacy service. This role is hands on and requires initiative, passion and a collaborative approach. You will be working in...

    $932 (Avg Bid)
    $932 Avg Bid
    7 bids
    3d animation 15h left
    VERIFIED

    I am looking for 3d animation like this [login to view URL] for one of structural steel design. i have 3d model ready.

    $453 (Avg Bid)
    $453 Avg Bid
    48 bids

    Hi vikashkumar86, I am looking for 3d animation like this [login to view URL] for one of structural steel design. let me know if you can do this so we can discuss.

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    Hi vikashkumar86, I am looking for 3d animation like this [login to view URL] for one of structural steel design. let me know if you can do this so we can discuss.

    $10 (Avg Bid)
    $10 Avg Bid
    1 bids

    I need assistance with doing an analysis of interview and survey data. There are about 20 surveys and 20 interviews. I need someone experienced in taking this sort of data and transforming it into something meaningful based on patterns. I will only award gig to a local person that can come into our office in Zetland NSW.

    $415 (Avg Bid)
    $415 Avg Bid
    24 bids

    ...the html code for my email signature. I need it to be responsive on all major email clients on most mobile devices. Also needs to be under 10,000 characters so it's accepted by Gmail. Need it done in under 24 hours. The code below was created using a Word document and then converting to an HTML file. It needs some <div> t...

    $30 (Avg Bid)
    $30 Avg Bid
    30 bids

    Below is the html code for my email signature. I need it to be responsive on all major email clients on most mobile devices. Also needs to be under 10,000 characters so it's accepted by Gmail. Need it done in 24 hours. The code below was created using a Word document and then converting to an HTML file. <p class="c0"...

    $20 / hr (Avg Bid)
    $20 / hr Avg Bid
    33 bids

    Hi All, I need: - To convert paper drawings to DWG format o The building is a simple two stories townhouse with 3 bedrooms and 2 bathrooms and set of drawings include  Sub, Ground and 1st floor plan  Land plan  2 sheets of general structural details including beam and posts layout  3 sections  4 elevations - Then I need in...

    $90 (Avg Bid)
    Guaranteed
    $90 Avg Bid
    12 entries

    Small extraction facility needs stamped plans for concrete to support 22,000 lbs tank, on 8x8 foot pour, tank specifactions will be provided. Soil type: unknown location: Erie Colorado budget: flexible to scope

    $191 (Avg Bid)
    $191 Avg Bid
    30 bids

    The project is about peer reviewing and sealing the seismic calculations of some conduits in state of Iowa. It needs to be done by a licenced professional civil/structural engineer.

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    12 bids
    Trophy icon Band T-shirt design Ending left

    ...called Chase the Comet. We need a design for our new merch shirt. It should be maximum 3 colors (bright colors or just monochrome), look cool AF (obviously, look examples below:), have our band name (and not necessarily our logo), and make people wanna wear it! I should also be horizontal so that we could do the chest print not the full front pr...

    $68 (Avg Bid)
    $68 Avg Bid
    31 entries

    1. Structural analysis based on EuroCode. Pretension load of the membrane should be considered. These pretension loads will be given. Structural report will be prepared. 2. Shop drawings (Steel S 235 JR, colums: square sections, beams square or rectangular sections, others square section or tube) 3. Sidewalls can be open or closed. So the analysis

    $191 (Avg Bid)
    $191 Avg Bid
    18 bids

    We are based in Scotland. We are design material handling equipment (heavy duty equipment), similar to lift table but a lot larger (SWL 20Ton) which include electric powered HPU and hydraulic cylinders for Oil and Gas industry. We require experienced structural designer or engineer to check detail design drawings. Check the accuracy of engineering

    $1650 (Avg Bid)
    $1650 Avg Bid
    38 bids

    ...are based in Scotland. We are design material handling equipment (heavy duty equipment), similar to lift table but a lot larger (SWL 20Ton) which include electric powered HPU and hydraulic cylinders for Oil and Gas industry. We require experienced hydraulic engineer to check our hydraulic system design drawings. Engineer should able to <...

    $795 (Avg Bid)
    $795 Avg Bid
    45 bids

    I Need Electrical engineer to write products descriptions on solar products. As articles require some solid knowledge of solar energy terms so don't apply if you don't have knowledge of solar energy and solar products like inverters, panels and batteries.

    $10 / hr (Avg Bid)
    $10 / hr Avg Bid
    11 bids

    ...content updating for better rankings +link building for a cleaning business. Requires website updated for best SEO and fix onsite SEO issues [login to view URL] Mention CleDou in comments or your bid will be ignored. link building and rank building for keywords 3-month trial then ongoing work.. ==Main Suburbs/Areas to target in NSW<...

    $125 (Avg Bid)
    $125 Avg Bid
    9 bids

    The applicant needs to be responsible in doing the following: - Can build in security during the development stages of software systems, networks and data centres looking for vulnerabilities and risks in hardware and software - finding the best way to secure the IT infrastructure of an organisation - building firewalls into network infrastructures

    $275 (Avg Bid)
    $275 Avg Bid
    22 bids

    Tin Garage. Manly NSW. One side. 2m x 4m. Tropical setting. Toucans and McCaws and a Tiki......

    $257 (Avg Bid)
    $257 Avg Bid
    5 bids

    Tin Garage. Manly NSW. One side. 2m x 4m. Tropical setting. Toucans and McCaws and a Tiki......

    $328 (Avg Bid)
    $328 Avg Bid
    14 bids

    Looking for structural, electrical and industrial engineers to help me build a prototype Fiberglass camper.

    $41 / hr (Avg Bid)
    $41 / hr Avg Bid
    34 bids
    $200 Avg Bid
    19 bids

    Masjid Near Jodhpur, need STructural and Architectural design.

    $151 (Avg Bid)
    $151 Avg Bid
    48 bids