Need paper drawings converted autocad drawings jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    19,026 need paper drawings converted autocad drawings jobs found, pricing in SGD
    Civil Engineering Drawings 6 days left
    VERIFIED

    I need the following Civil Engineering drawings: (1) Notice of Intent ( NOI) to TCEQ required. (2) Location and detail of all storm water pipe (3) Hydraulic Drainage Study; (4) Retention Pond Design for Storm Water; (5) Plat with utility and drainage easements identified; (6) Details of drainage inlets; (7) Domestic water needs ( size of line), as well

    $197 (Avg Bid)
    $197 Avg Bid
    11 bids

    I have two visio files that we were told were drawings but they look like images instead. I need the images to be replicated in autocad as an actual drawing. Timeline is pretty short only a few days

    $431 (Avg Bid)
    $431 Avg Bid
    57 bids

    ...here [login to view URL] I am finding it difficult to source quality SVG line drawings to draw with my plotter, so Part 1 of the project is to help me with this. I need a reliable process to turn images into SVG line drawings that can be drawn on my plotter, either using existing software solutions or a custom piece of software

    $129 (Avg Bid)
    $129 Avg Bid
    4 bids

    ...Protection Design and Consulting company with over 20 years trade experience. We are looking for a certified engineer in Ontario, Canada, to review and stamp fire protection drawings and backflow prevention submittals. We are not looking to “purchase” a stamp. We operate with integrity and professionalism. The right candidate will be familiar with NFPA

    $348 (Avg Bid)
    $348 Avg Bid
    2 bids

    ...architectural project sheets in a complete drawing set and a list of specification section from the project manual. The sheet names, date, spec sections and description, etc need to get populated into the word form. The entries in the form are just examples, and should be deleted, so the form is filled with only the sheets and specs from the pdfs. Drawing

    $31 (Avg Bid)
    $31 Avg Bid
    19 bids

    Will need to be stamped and approved for permitting in county of San Bernardino California, will be RV storage for a 45foot RV, with an attached 800sqft living quarters. I prefer contemporary/industrial designs, so I've attached some of the looks I like, this home will be built in a high desert so I would like it to fit in geographically.

    $452 (Avg Bid)
    $452 Avg Bid
    7 bids

    Need someone experienced to work with the project. I want someone who can work with 2D Vectors on Android app and with 3D on web. That is 2D drawings which will be made in android studio related to floor plans and later on exported and displayed only on the web in 3D. For More Information contact.

    $539 (Avg Bid)
    $539 Avg Bid
    9 bids

    We are looking for a freelance person that is able to receive a hand written drawing and be able to turn this into a .DWG file CAD. The CAD's needed are not hugely complicated so shouldn't take too much time up. It is mostly furniture or brackets as we specialise in the retail furniture market.

    $23 / hr (Avg Bid)
    $23 / hr Avg Bid
    129 bids

    ...surrounds and quartz vanity tops. You will need to learn our products and hotel brands requirements. (we will train) We will be sending you 5-10 hotel architectural plans every day. Your job is to review the architectural plans, measure from elevations and match our company's products based on the shop drawings we provided. This is a part-time to full

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    36 bids

    ...who would be in a position to prepare hand made (not computer made) 18 drawings (illustrations) for a book on personal finanse management aimed at males/females age 18-25. Each illustration should match each chapter title (there are 18 chapters hence 18 drawings are needed). We need files in ai, tiff or eps file format. Each illustration in a separate

    $853 (Avg Bid)
    $853 Avg Bid
    89 bids

    Make 3 floorplans for porch (birdview, front and sideview) and the same drawings in autocad You must look at the attached file to read the project. Notice that the measurements are not finalized and you will need to change some of the measurements later. I will pay you USD 40.

    $130 (Avg Bid)
    $130 Avg Bid
    26 bids

    I have 2 Lectra Modaris .MDL files for a dress graded in 3 sizes. I need to send a PDF version to the tailor so that it can be printed locally. It is a 2 piece pattern (Front + back) with 2 piping pieces.

    $72 (Avg Bid)
    $72 Avg Bid
    8 bids

    I need two drawings "cleaned up" with an eraser tool and something added to one of the drawings. $10 fixed price.

    $17 (Avg Bid)
    $17 Avg Bid
    35 bids

    Would you be interested in creating shop drawings for us? This time we would need roof shop drawings for an SBS system. We have the DWG files and we just need to adjust them to our standards. Please let me know if you are interested. Then I'll send you the documents.

    $188 (Avg Bid)
    $188 Avg Bid
    73 bids

    ...which we need 1 plan (from above) and elevation (front and side) for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can re-scale them our end once the dims have been confirmed. The proportions need to be

    $212 (Avg Bid)
    $212 Avg Bid
    18 bids
    autocad drawing 3 days left

    2d Plan, working drawing, joinery, saintry and electrical drawing

    $25 (Avg Bid)
    $25 Avg Bid
    34 bids

    ...bespoke furniture which we need plans and elevations for -so that we can place them into our interior drawings. No 3D modelling required. Some of the dimensions have not been confirmed so we need them drawn as accurately as possible from the photos and we can rescale them our end once the dims have been confirmed. The proportions need to be as correct as possible

    $223 (Avg Bid)
    $223 Avg Bid
    19 bids

    Delivering revit files from supplied AutoCAD files

    $24 / hr (Avg Bid)
    $24 / hr Avg Bid
    74 bids

    Would you be able to start drafting up some elevations of the outside front and rear elevations for me based on the photos.

    $31 (Avg Bid)
    $31 Avg Bid
    43 bids

    I have a fantasy young adult fiction novel about a witch. I hope to convert it into an audiobook. It has about 120,000 words. I hope to spend 250-300usd and get a good production.

    $253 (Avg Bid)
    $253 Avg Bid
    7 bids

    We want to change our Autocad Architecture System from 2010 to 2019. We need help for getting all our enviroments, walls and texts to the new System.

    $168 (Avg Bid)
    $168 Avg Bid
    22 bids

    ...engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets for commercial

    $12 / hr (Avg Bid)
    $12 / hr Avg Bid
    39 bids

    ...auto cad i just want the drawings adjusted slightly, but i also need the tee piece drawn up on auto cad, and then all 4 disks and the tee piece 3d modeled so they can be printed out on 3d printer.(total of 6 parts) - I will need to work with you on design and give you measurements as they need to be exact. - I will also need to make sure they will

    $48 (Avg Bid)
    $48 Avg Bid
    13 bids
    patent drawings 3 days left
    VERIFIED

    I have 2D vector CAD drawings that need to be cleaned up and prepared for patent drawings. approximately 10 drawings plus 1 drawing made from a photo. only people with prior design patent drawings or design patent illustration knowledge.

    $190 (Avg Bid)
    $190 Avg Bid
    15 bids
    AutoCad drawings 3 days left

    I am studying the 3 main Pyramids of Giza and hope to write a book about them. I firstly want 2D AutoCAD drawings that highlight key dimensions. I have these for the Khufu (Cheops) Pyramid on a XL Spreadsheet. I want to highlight the inherent geometrical patterns by using different colored lines but this involves a large area outside the structure also

    $18 / hr (Avg Bid)
    $18 / hr Avg Bid
    62 bids

    I retail sofas. I need clients to easily see what a chairs looks like, two seater, three seater etc. Line drawing, birds eye view. Rough hand drawn sketch provided.

    $11 / hr (Avg Bid)
    $11 / hr Avg Bid
    24 bids

    ...engineer/architect/interior designer to complete detailed design drawings for construction sets which include the following: 1) Partition Plan 2) Demo Plan 3) Finish Plan 4) Furniture Plan layout 5) Reflected Ceiling Plan 5) Elevations and Section drawings Must be proficient in AutoCAD and must have experience in construction drawing sets for commercial

    $433 (Avg Bid)
    $433 Avg Bid
    55 bids
    CAD drawings 2 days left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    $151 (Avg Bid)
    $151 Avg Bid
    11 bids
    Trophy icon CAD drawings 2 days left

    I need three three simple CAD drawings done. Two are different, with the third being a mirror of one of the other two. To be eligible for this job, you must be able to screen share and engage in audio conversation. Please quote "chamfer" in the first line of any reply.

    $87 (Avg Bid)
    $87
    13 entries

    I have pdf report that comes out every week (Please see the attached) I would like the information listed in it to be converted into an excel report so I can have it uploaded to my database. The information on the report is formatted like this (PLEASE SEE ATTACHED REPORT) I would like the conversion to appear in excel formatted as follows (PLEASE

    $114 (Avg Bid)
    $114 Avg Bid
    39 bids

    I need 10 line drawings done.. just need to outlines main lines.. line thickness 0.50mm then positioned inside a 34mm diameter circle MESSAGE ME TO START NOW

    $42 (Avg Bid)
    $42 Avg Bid
    28 bids

    We need several drawings done for an office furniture line. We currently have some done so the new ones will need to match. There are 4 colors and many configurations. We need a freelancer that has a fast turn around time and is very proficient in furniture renders. Attached are some that are already created. I will create a milestone for a freelancer

    $197 (Avg Bid)
    $197 Avg Bid
    62 bids
    Autocad blue print 2 days left
    VERIFIED

    I need someone to help me draw blue prints for a factory

    $181 (Avg Bid)
    $181 Avg Bid
    42 bids

    ...professionally managed company with highly technical background. We takeup challanging projects and execute them to client's satisfaction. This is an ongoing work and we need a person who can be associated with us for next few years. It may not be necessary to come to our factory. Once a system / trend is establised, you can work from home also.

    $27 (Avg Bid)
    Local
    $27 Avg Bid
    3 bids
    Autocad plans for home 2 days left
    VERIFIED

    I am putting together an idea for a dream home. I have some ideas sketched up and would like to have them put into a DWG file so I can add and change them as I please. Just a 2d model.

    $35 (Avg Bid)
    $35 Avg Bid
    75 bids

    Would like a machine drawn up so we can then get all componentry laser cut. We will supply all sizes that we would like drawn and all hardware included.

    $375 (Avg Bid)
    $375 Avg Bid
    106 bids

    I am looking for an Expert/Experienced Auto-CAD Designer to help sketch my concept, design and showcase a 3D version of the product as well as suggest the best textile options. I am looking for someone who can create this concept and be able to meet the desired details based on the functionality of the product. I have uploaded pictures to give an idea of what this product would be doing. You wil...

    $283 (Avg Bid)
    NDA
    $283 Avg Bid
    19 bids

    I am putting together an idea for a dream home. I have some ideas sketched up and would like to have them put into a DWG file so I can add and change them as I please. Just a 2d model.

    $53 (Avg Bid)
    $53 Avg Bid
    21 bids

    I need line drawings done outlines main lines ..14 total and 10 line drawings edited to make line thickness 0.50mm all drawings need to be 0.50mm in line thickness and put inside a 34mm diameter circle.. PLEASE MESSAGE ME TO START NOW need done today and tomorrow more designs every week..

    $53 (Avg Bid)
    $53 Avg Bid
    37 bids

    We need the design by a structural engineer, using AutoCAD, of a retaining wall using geocells, geogrids and geotextile, based on a topographic survey, taking into account all vectors, topography of the field, seismic risks, etc. Width of 50 meters and high of about 15 meters. 8 Drawing profile sections to be delivered with all volume of material required

    $508 (Avg Bid)
    $508 Avg Bid
    27 bids

    Design a drone frame as directed.

    $125 (Avg Bid)
    $125 Avg Bid
    23 bids

    I need basic drawings that will get me by for permitting and pricing for a new campground in Walsenburg Colorado. City water runs through the site on the east side. see sketch from survey, blank survey and topographical map. On the sketch the likely location of the water line is the red line on the east side of the property (right side of image) it's

    $7217 (Avg Bid)
    $7217 Avg Bid
    33 bids

    Modify 2-D AutoCAD files to reflect as built changes for elevations and plan view. Drawings are for residential kitchen, bar and media room. PDF of changes needed is attached. DWG files are available in AutoCAD 2016 and 2018 versions.

    $473 (Avg Bid)
    $473 Avg Bid
    26 bids

    Need 8-10 still image drawings if cartoonised characters. The drawing needs to be done in adobe illustrator and file provided in .svg format. Similar to this in the video attached. [login to view URL]

    $189 (Avg Bid)
    $189 Avg Bid
    22 bids

    I need an iPhone/iPad app. I already have it for android, I just need it to be converted from Java to Swift.

    $185 (Avg Bid)
    $185 Avg Bid
    11 bids
    Autocad designar 4 hours left

    3d max not perfect, because I am working

    $8 - $14 / hr
    $8 - $14 / hr
    0 bids

    Installing a boiler - feed tank - blow-down tank - water softener with heat exchangers (steam shell , water tube) to act as a split system to provide hot water to 30 wash stations for CIP and two different temperature zones (120 degree x 29 zones and 170 degree 1 zone)

    $485 (Avg Bid)
    $485 Avg Bid
    35 bids

    I need to draw bilge suction strainer Plan Ground plan side view If someone wants to do this for me just upload file in dxf and send it to me.

    $33 (Avg Bid)
    $33 Avg Bid
    71 bids