Announcement of the AMPS Challenge winners, launched by Freelancer and Arrow Electronics, sponsored by the Bureau of Reclamation.
Hi, How are you doing. I am looking for electrical engineers to work on multiple tasks in following areas: • Embedded C Programming. • VHDL/Verilog, LABView/ Multisim/PSPICE • Network Simulator NS2/NS3 • Microcontroller like Arduino, Raspberry Pi, FPGA, AVR, PIC and STM32. • IDEs like Keil MDK V5, ATmel studio and MPLab XC8. • PLCs / SCADA • PCB Designing-Proteus, Eagle. • IOT Technologies like Ethernet, GSM GPRS. • HTTP Restful APIs connection for IOT Communications. I am looking for long term work relationship. New freelancers are warmly welcomed. Important Note: I need dedicated freelancers who strictly follow the deadline and give me good quality work without any plagiarism.
It would also be helpful if a VI is created. Sample code written in VB.NET is available to help.
Analytical instrument company seeking a Certified Labview developer (CLD) with experience in developing software programs for an instrument control project. The candidate should have hands on experience in integrating hardware with Labview using USB and RS232 serial interface ports. Project will be to develop Labview Application to specified designed screens and flowcharts provided by Development team. The new program will interface with analytical instruments and modules as well as act as the user interface with the customer.
I have to develop a LabView code to acquire data (Voltage) from 2 analogue input channels on a DAQ 6001 device. I should be able to watch the voltage fluctuation in real-time and be able to record x amount of data on the press of a button. This should be written to an excel files with customizable headers to include testing conditions and such.
design and develop a system prototype for Virtual Instrument (VI) panel for monitoring data at a renewable energy powered Electric Vehicle (EV) charging station, using LabVIEW. To evaluate the VI panel for EV charging station monitoring, you will be using simulated digital and (analogue inputs and outputs from/to sensors and actuators, connected to USB DAQ device, and processed in LabVIEW programme or the simulation of the input analogue signal). Using LabVIEW, design, implement and evaluate a Virtual Instrument panel prototype for monitoring such EV charging station. The instrument panel (dashboard) should be able to display : · Solar and temperature data · EV station battery State of Charge (SoC), and · Vehicle battery (SoC) data
Seeking a seasoned DSP engineer to develop example apps and demos that integrate LabVIEW with cuSignal for customer applications. Familiarity with LabVIEW RFSA, DAQmx, NIScope and PXIe hardware very helpful. Also, familiarity with RDMA and GPUDirect quite helpful too.
PART_1 I want to control an Arcus DMX-UMD-23 stepper motor. Here is the link to the stepper motor manual and labview software. This motor has a built in integrated stepper controller and can be controlled via a usb port. 1. we want to control the motor via the usb port 2. we want a screeen display switch to send the stepper to "home", home is a limit switch. 3. we want a screen display "switch" that allows us to choose either clockwise or counterclockwise rotation. 4. we want to make changes in the speed of rotation (i.e. the step size), so we need a control on the screen to do that by choosing the step size. 5. we want a box on the screen that given an input of "X steps", when we press
Hi Rohit K., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I have Labview project I can share it with you. Let me know if you can do it. Don’t accept till you know that you can do this.
We are Expertise in QT software full scale development automotive, medical, etc. All design documents , development, testing full sdlc implementation. Expertise in languages c++, python. Windows,Linux operating system. Expertise in Parallel programming, cuda, opencv, opencl, opengl, LabVIEW, matlab.
Hi, I am trying to automate two alicat mass flow controllers for my project using labview programing. I want to operate them at different flow rates at different time. Such as, for 60 minutes, A at 500 sccm, B at 0, next 15 minutes A at 450, B at 50, next 60 minutes A at 500 sccm and B at 0 sccm. I want add as much as time and flow variation I want in the program(preferably about 20-30). I have labview 14 and 2021 version. Therefore, I can test it out the code.
We need to develop a custom interface which displaying measurements outputted from a thickness gauge. About the thickness gauge: • The gauge uses probes to measure layer thickness in one axis. • Currently the software only displays layers from the top down, top wall thickness, ID/air gap between walls, lower wall thickness (see attached) • Can be connected via USB or ethernet cable • Software interfaces directly with the instruments DLL files. The interface/program needs the following functionality: • Calculate and display tube OD and average Wall thickness • It will need to have an option for 1 probe, and 2 probes. • Average function that will calculate the average for the last 1 or 100 measurements. • Location to input tube measurements and t...
...build in LabView. It requires initially four simple RS232 and one RS485 driver to be written. There is some documentation available on the driver protocol but it may need work on figuring out the exact wiring and commands back and forth. I am using an industrial type RS232 to USB converter (FTDI chip) and two of the devices are able to talk to the computer. The other two I have not yet luck. This includes the RS485 and the issue maybe correct wiring as the instructions are skimpy (German). The devices are a motor, a temp controller, a Alicat mass flow meter and pH Electrodes. This is for a 6 bioreactor process control, monitoring and display application. In addition ideally I would like to add features such as a webcam and notification via email and a display on an iPad using th...
I have need to translate the graphic interface of this program realized in labVIEW 2014 version, it is compose. i have only the ".exe" file and the installation folder.
Hello, we're looking for an innovative LabVIEW testing engineer to support LabVIEW test automation development with flexible terms, schedules, and remote work. Requirements: - Senior level of experience in LabVIEW development - Fully available to work during the US (PST) time zone - Perfect written English communication - Willing to sign NDA - Individual developers ONLY Mutual NDA will be provided for the next followups after the initial interview. I look forward to hearing back from you soon! Thank you
Need someone to assist me to develop a machine control software based in LabVIEW (to control stepper motors, and other peripherals)
I would like to work with an expert Labview designer that will create us an inspection instrument for a relay. Our dry contact relay should toggle every a given period of time, for example 2 minutes. (that means this relay remains closed for 2 minutes, and then remains open for two minutes and so on). We would like an instrument where we set a threshold (for example 2 minutes and 30 seconds) and if the relay has not toggled within the threshold time, we get notified in a clear way (it could be a loud noise, it could be the execution of a code that sends a text message, whatever, as long as we can be notified that the threshold time has been exceeded without toggling). please begin the bid with the words "toggle inspection" to make sure that you have read the above. We w...
I am looking to create a python server and a labview client that is able to send data and express said data on a graph in labview. I am recording and filtering EMG data using a python module on Computer 1 but need to code a TCP/IP connection through ethernet to Computer 2 which will be running LabView. I need the ability for this data to be expressed in LabView as it will then be used to control a robotic device's current level. This project involves coding both the Python server and LabView client such that data from python can then be expressed in LabView (preferably in graphical form).
We would like to create a framework for the areas of interest using labview for linux
Acquisition Mode features Data acquisition under different operational modes Parameter definition (measurement description, measurement type etc.) Selection of scan and increment axes (parameters, scan direction, stepped or continuous mode) Configuration of different connected instruments and Sensors Storing configurations and custom settings, recalling stored configurations, saving measured data in pre-defined file formats Real-time monitoring of acquired data with the ability to pause and save partial data set Supports concatenated batch runs Support for commercially available Keysight, Rohde & Schwarz and Anritsu RF instrumentation Measurement abort on user defined critical events Resuming unfinished measurement Analysis Mode features Raw data 2D/3D plotting in...