Embedded software engineering arduino jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Skills
Languages
    Job State
    17,948 embedded software engineering arduino jobs found, pricing in SGD

    I have a working unit that a freelancer built for me in Aruduino (got a .ino file) and I built with the components list that the freelancer sent and the PCB that he planned (sent it to Seeed to print). It's about 90% tested but I have some issues that are code related that need to be fixed. I have attached the job description of the job of building the whole unit (not this job) just so you ...

    $191 (Avg Bid)
    $191 Avg Bid
    10 bids

    ...student undertaking a school project for systems engineering in Melbourne. For my project, I decided to make a bomb disposal robot (robotic tank + robotic arm mounted on top). So, my robotic tank (controlled via blueooth) is working perfectly but I am having issues with the robotic arm. I'm a beginner Arduino user and don't have the coding skills to be able

    $212 (Avg Bid)
    $212 Avg Bid
    10 bids

    I nee...modem quectel M66 that are unsupported. The library needs to receive and send MQTT messages to our MQTT server. Need to work at lest with QOS 2. We have M66 hardware and arduino uno and to get project a probed the fork need to pass the test of this sketch: [login to view URL]

    $329 (Avg Bid)
    $329 Avg Bid
    15 bids

    I need to get an image from any CIS sensor using a microcontroller and transfer the data to a computer and get a gray image.

    $272 (Avg Bid)
    $272 Avg Bid
    15 bids

    I need you to write a 5 pages proposal on OPERATION MANAGEMENT OF WIND FARMS AND SOLAR POWER PLANTS WITH IMPLEMENTATION OF ENERGY STORAGE. Deadline is 15 hours from now. Please bid only if you can do

    $34 (Avg Bid)
    $34 Avg Bid
    6 bids

    Hi I am looking for an embedded Software Programmer for ECU Project, Whose having strong knowledge on 32 bit controller programming with automotive experience. Protocols: SPI, CAN (Must) Device drivers: ADC , DAC, PWM Should have good understanding about electronics hardware. Duration of the project: 45 Days to 60 Days Deliverable : Complete

    $1376 (Avg Bid)
    $1376 Avg Bid
    14 bids

    Write a code for Arduino. Control 3 lights wirelessly in 4 locations. 4 locations each having 3 lights . All 4 loctlocat synchronisation of lights on off 3 press Lt a on rest off 5 press Lt b on rest off 7 press Lt c on rest off 3 sec press lts which was on blink 5 seconds press all off Valid input within 5 second of first press. Keep state same

    $86 (Avg Bid)
    $86 Avg Bid
    12 bids

    Hi, I want to develop a lighting sensor using a raspberry pi or arduino. The idea is : we have a LED Light with a PIR sensor on it. we want to have an ambient sensor ( like a BH1715 or similar) on a rasberry pi which will trigger the PIR sensor of the light when the sensor reaches a defined lux level.

    $398 (Avg Bid)
    $398 Avg Bid
    42 bids

    Budget $750-1000 USD • Freelancer • Jobs • Electrical Engineering Requires developing an embedded systems hardware and firmware of Arduino to connect 1 motor, 1 solenoid, 1 LCD, 1 Ultrasound Sensor, 1 Arduino board, and a battery that will measure liquid flow. Arduino board will receive two inputs (battery, ultrasound) and send two ouputs (L...

    $2040 (Avg Bid)
    Local
    $2040 Avg Bid
    2 bids
    Program Arduino 5 days left

    Marine toilet operation. Legislation requires any marine toilet to be able to store or discharge the toilet contents.

    $147 (Avg Bid)
    $147 Avg Bid
    6 bids

    I want to create a sensors station with an arduino to get sensors data and send it wireless to a server. I need an arduino expert to code it. This is the initial project but I'm looking for a long time relationship. Please write me by pm for details.

    $579 (Avg Bid)
    $579 Avg Bid
    34 bids

    using raspberry+arduino+qr reader from any cell phone

    $631 (Avg Bid)
    $631 Avg Bid
    19 bids

    Looking for a simple program so that an Arduino (or RasberryPi) can control an AC motor. The system will need to be able to do the following: * Start and stop the motor * There will be mechanical limit switches that will shutdown the motor when tripped. * Restart the motor after limit switch has been tripped via UI (mobile application, Web UI etc

    $213 (Avg Bid)
    $213 Avg Bid
    33 bids

    ...data(both XYZ and rotation) to an arduino(Com port). One of the challenges is that the rotation data needs to be in EULER so that gimble lock is avoided. (For examnple the tracker postion needs to be able to rotate more than 360 degrees - if it is rotated 2 times on an axis - the value sent needs to be 720) The arduino needs to recieve this information

    $137 (Avg Bid)
    $137 Avg Bid
    1 bids

    Engineering of Phone with PCB Details

    $108 (Avg Bid)
    $108 Avg Bid
    3 bids

    Design a PCB including Gerber and schematic. Led out puts 4 different type of LEDS Selectable by switch. Max current each led 1...either solar or 12v 1 amp charger. Dimmer based on PWM. Input for led selection dual select, knob based and select based on input from Arduino pins, pin will give high input of 5 v for LED on/off. Four input from arduino

    $26 (Avg Bid)
    $26 Avg Bid
    19 bids

    Write an Arduino code for school project. Features One button input control different led Four LED output on different pins When button press 3 times led one on rest off When 5 times press led 2 on rest off When 7 times press led 3 on rest off When long press 3 seconds blink LED which is on already Long press 5 seconds all led off The valid input

    $23 (Avg Bid)
    $23 Avg Bid
    10 bids

    I'm building a 3 axis camera motion slider and I need someone who can modify an existing sketch to suit different outputs and also add PS3 bluetooth control using the PS3BT.h library and the AccelStepper.h / MultiStepper.h libraries. This should be a pretty simple job for someone with the right skills as most of the sketch already exists.

    $44 (Avg Bid)
    $44 Avg Bid
    2 bids

    Hi John Arturo M., I noticed your profile and would like discuss some arduino based projects we are looking at.

    $34 / hr (Avg Bid)
    $34 / hr Avg Bid
    1 bids

    I would like a circuit design and product recommendations for my arduino project. The circuit should be arduino controlled and based, some components I have selected, some I would like recommendations for. I would be happy with selection of parts from here if enough choice is available to make sensible selections based on the requirements. https://www

    $209 (Avg Bid)
    $209 Avg Bid
    6 bids

    Current project is building a digital swing weight scale for golf clubs. Digital scale portion is built using an Arduino Nano, 1kg load cell, HX711 load cell amplifier, a pushbutton, and a 1602 I2C LCD. Attached is the code which works fine and a pic of readout I’m getting on LCD. All good. What I would like to do is convert the gram weight to swing

    $74 (Avg Bid)
    $74 Avg Bid
    9 bids

    EMBEDDED, MICRO CONTROLLER, ROBOTICS

    $419 (Avg Bid)
    $419 Avg Bid
    10 bids

    I want to make Bluetooth Controlled Arduino RC Car, and I need Arduino code for it to work.

    $97 (Avg Bid)
    $97 Avg Bid
    21 bids

    Report writing work. I will need it in next 12 hours. So please only bid if you are available to start it now. I will give you detail in PM.

    $135 (Avg Bid)
    $135 Avg Bid
    14 bids

    This project has 3 part, PCB Hardware,Firmware inside that and Enclosure. Firmware should have these capability : * scan for BLE tags * gather their list *...firmware source code and pcb design files and one working sample of device. High quality project is so important for us. Using espressif firmware is recommended compare with arduino.

    $6062 (Avg Bid)
    $6062 Avg Bid
    45 bids

    i have a arduino car, the car has a button, when i press that button, the car will follow the black line stick on the ground and go from one side to the other side. The car can run perfectly, but i want to upgrade. Now, i want to add a wifi module to the arduino car, you need to write a c# program, the c# program has a GUI interface, when i press the

    $182 (Avg Bid)
    $182 Avg Bid
    15 bids

    Hi, I need help with a small project in Transport Planning & Highway Engineering I need it in next 48 Hours. Let me know if you can do it

    $76 (Avg Bid)
    $76 Avg Bid
    22 bids

    Gas gauge load cell based 3 inch display Mobile application for same. REGARDS Girish [Removed for encouraging offsite communication which is against our Terms and Conditions -Section 13:Communication With Other Users]

    $40 (Avg Bid)
    $40 Avg Bid
    13 bids

    I have tried several times but I may not be getting it...be getting it right. I am looking for the ability to create an Arduino controlled garage door remote RF reader for my home automation system. A separate Arduino will be able to send the same door code. This contract will require providing a working copy, a parts list as well as the Arduino code.

    $621 (Avg Bid)
    NDA
    $621 Avg Bid
    15 bids

    I have p10 dmd display ,arduino and dmd library i can display text on this panel in english language i want to display text in arabic language on panel any one have solution

    $264 (Avg Bid)
    $264 Avg Bid
    10 bids

    Code my arduino so that it produces all the colours on my L.E.D strip. Just Like in this video [login to view URL]

    $30 (Avg Bid)
    $30 Avg Bid
    7 bids

    Need someone whos a pure master in arduino who can assemble and program 2xtransceivers to do a few cool stuff.

    $1346 (Avg Bid)
    $1346 Avg Bid
    42 bids

    I want you to use one of the sensors I posted to detect electricity ...voltage, current and small leakage of electricity should me detected. Please help me to choose the most sensitive sensor. Also, teach me how to connect the wire, i will use arduino nano and nano shield. Simple project! Just need to write the code I will buy those sensor by myself.

    $44 (Avg Bid)
    $44 Avg Bid
    12 bids

    Need a developer to teach and guide me embedded development related work. Project will be discussed later., can afford to pay 9-12$ per hour for guiding and supporting. Thank you

    $15 / hr (Avg Bid)
    $15 / hr Avg Bid
    12 bids

    The communication protocol between the tinkerboard and arduino is breaking due to a algorithm bug. we need someone to debug the algorithm and configure an effective solution to run the code without crashing. this problem is mainly occurring when the boards are transmitting particular data.

    $156 (Avg Bid)
    $156 Avg Bid
    17 bids

    Task: This tassk asks you to individually provide the requirements analysis specification for an example of a real-time system. You will be required to complete Data Flow Diagrams (DFDs) and Entity Relationship Diagrams (ERDs) as well as include RT-SASD modifications and components including Control Flow Diagram extensions (CFDs), updates to Process Specifications (PSPECs) and Data/Requirements D...

    $130 (Avg Bid)
    $130 Avg Bid
    4 bids

    I need an embedded systems and PID programming resource

    $2446 (Avg Bid)
    $2446 Avg Bid
    1 bids

    Hi Rishi A., I noticed your profile and would like to discuss a project with you regarding arduino and web interfacing. Would you be keen to hear me out?

    $137 (Avg Bid)
    $137 Avg Bid
    1 bids

    1. Must have 4-6 years of experience in embedded software application development 2. knowledge of BMS Application, Charge control development etc. 3. Embedded Device Driver knowledge (I2C, SPI, UART, CAN, GPIO, PWM, Driver). 4. Hands on experience with SW design and development using communication protocols: Master – Slave Communications (CAN, RS485

    $2210 (Avg Bid)
    $2210 Avg Bid
    12 bids

    Want to have a page that has custom html form that I built that I want embedded onto my site that the user can add to. They will be able to edit and add text to regular text fields and field with bullet points. Once finished they should be able to save and that record or form should be added to some type of database.

    $61 (Avg Bid)
    $61 Avg Bid
    19 bids

    write a report based on a structural engineering. I can provide you the data for calculations.

    $546 (Avg Bid)
    $546 Avg Bid
    48 bids

    ...your profile and would like to offer you my project. Here is an overview of my project to see if you are interested. Very briefly I need to send 16 Float values from one arduino(MASTER) to another via IC2 (wire.h) These values are not of fixed length. Then the SLAVE needs to seperate these 16 values (back as floats as well as strings, in the same

    $68 (Avg Bid)
    $68 Avg Bid
    1 bids

    I need you to develop some software for me. I would like this software to be developed using C or C++.

    $137 (Avg Bid)
    $137 Avg Bid
    15 bids
    Arduino project - Automation 1 day left
    VERIFIED

    I am looking for a good embedded, arduino team to create a automated vegetable chopping/cutting system. The system has to check the weight of the vegetable, need to wash the vegetable and cut as per the vegetable..

    $1118 (Avg Bid)
    $1118 Avg Bid
    50 bids

    I am a BBQ restaurant owner. I would like to have my menu redesigned. I would like to hire someone form restaurant menu engineering background to put my menu design project together.

    $149 (Avg Bid)
    $149 Avg Bid
    37 bids

    Looking for contract work to help build out our iOS application

    $45 / hr (Avg Bid)
    $45 / hr Avg Bid
    100 bids

    Hello! I'm looking for someone who can create professional email HTML template based on provided information with embedded code/script, that will dynamically pull current COMEX or LME base metal prices along with some basic calculations, and result displayed in email. Please, reply with your ability to do something like that and your best quote Thank

    $205 (Avg Bid)
    $205 Avg Bid
    22 bids

    arduino program to make a servo motor works wrt the flex sensor

    $165 (Avg Bid)
    $165 Avg Bid
    48 bids

    I need help to connect my esp8266 or esp32 devices to Amazon AWS IoT (Alexa) service. It should be possible by MQTT/Websocket. There are some working projects for Arduino IDE but i need it coded for the Espressif SDK (non OS). I can provide some code and thoughts. We should discuss how to get it work the easiest way. Please contact me if you have any

    $302 (Avg Bid)
    $302 Avg Bid
    23 bids

    ...boards will be hard-coded in the firmware as we have a limited number of boards in use. Experience Experience with Particle (preferred) or Arduino development Experience with using HTTP over Particle or embedded (IoT) Preferred experience with using I2C to access sensor boards (humidity, temperature) Thanks...

    $52 / hr (Avg Bid)
    $52 / hr Avg Bid
    15 bids