Cuda encoder jobs

Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    2,000 cuda encoder jobs found, pricing in SGD

    We have an SDK with the dll and documentation to make a rfid encoder. What we need: - for each card we have a 16 chars HEX code to write on the card. - We want to write them all at once with the encoder inside our printer (Seaory T12). - We prefer the encoder works in the C101+ software delivered with it (but this is not required) - Each card has a unique code we can setup with a database (or .xls file). SDK + Docs in attachment.

    $205 (Avg Bid)
    $205 Avg Bid
    9 bids

    Advice a junior Cuda Developer

    $380 (Avg Bid)
    $380 Avg Bid
    3 bids

    The program calculates the diffusion of liquids in 2D. It is written in CUDA and C . (here is repository: ) It is necessary to make a block decomposition, so that each block is calculated on a separate GPU (CUDA), and these in turn communicate with each other through the CPU (MPI - just two commands for exchange data, and sending the data back to gpu). Data should be included and transmitted in the created halo cells. Preferred system: Linux The program is easy to modify. It's so brief. I invite you to cooperation.

    $535 (Avg Bid)
    $535 Avg Bid
    3 bids

    my name is Mary Ann Martinez.I need project is data encoder.

    $14 (Avg Bid)
    $14 Avg Bid
    1 bids

    Hi, I already have a Video encoder built using FFMPEG and a Bento Packager. I need some help with extending its functionality, perhaps a simple UI for it, and doing some general modifications.

    $9 / hr (Avg Bid)
    $9 / hr Avg Bid
    1 bids

    I want an android application in which images can be sent and received through sound signals.

    $188 (Avg Bid)
    $188 Avg Bid
    3 bids

    Nextion display project. Currently using a stepper motor to rotate a shaft. Have attached rotary encoder to display to serial monitor shaft position in degrees. Three revolutions of encoder shaft equals 360 degrees. Code run to Arduino Mega 2560 with signal to D2 and D3 and is working fine. These pins can be changed if necessary. Code will be included. What I would like to do is send serial data (degrees) to Nextion 3.5 display (NX4832T035) in real time. Would like to include simple gauge to show current position of shaft in real time. Also fixed text “LOGO UP” directly over “0” degree mark. Example attached. This is just a basic example of what I’m looking for. You can get as creative as you like with this. I am very new...

    $63 (Avg Bid)
    $63 Avg Bid
    6 bids

    I would like to build and Encoder to stream to multiple platforms and/or dedicated servers. I will need some help from FFMPEG/ Black magic experts.

    $16 / hr (Avg Bid)
    $16 / hr Avg Bid
    15 bids

    Please oversee the code to see if you have the answer to fix the problem and then bid with...(part 4) which is not working properly. Code - It is supposed to control a stepper but in my setup the only response I am getting is the stepper moving 1 step forward, 1 step backwards as if it is jammed. Everything else inlcuding the buttons, buzzer, rgb and encoder ALL work except for the movement of the stepper. I have tested components (in the same breaboard configuration with the Part 3 code on this website before and the stepper works controll with the encoder works perfectly ( which is practically the same but without the A and B ponts) -

    $36 (Avg Bid)
    $36 Avg Bid
    11 bids

    Make a complete SW code for arduino (or etc.) for collect data from linear CCD sensor and transfer to PC. Use prepared circuit or use own. It possible make complete own HW for comunication and control directly from PC (connection over USB 3, OS Win or Linux).

    $734 (Avg Bid)
    $734 Avg Bid
    10 bids

    i need a menu library based on TFT_eSPI , the library is controlled with a rotary encoder with a button to index pages and in every page to index sub menus evey item in the sub menu can be either ( integer, char/string, Boolean) can be set with the library which one to choose , also the settings shall be saved on the eprom lib of the esp32 or esp8266 when pressing the encoder button. also I need you to use analog meter example in away i can set as many indexed meters in different pages as selected through the library to read the analog values of the as much analog inputs set by the library. also i need you to write me an analog meter library using the analog meter example in away to show different meters in different screens with different

    $243 (Avg Bid)
    $243 Avg Bid
    6 bids

    I have an Arduino based project with an esp32 as the main MCU working as the hub connected to two arduino uno via i2c . The esp32 is connected to an ili9341 tft, an sd card where the data is saved, and its own encoder. Each arduino uno has 1 rotary encoder with a button buttons, 1 PWM, and one switch. First encoder for the PWM has a frequency from 1 to 1000, The button of the encoder is to multiply the value by 10 or divide by 10 when pressed.. Each UNO is will ready 4 analog inputs to both . The values of the encoders and the eight analog channels will be displayed on both the android screen as well as the tft lcd . The esp32 will use Arduino code, while the host GUI will be an android app using based on mit inventor app that controls each UNO PWM for...

    $246 (Avg Bid)
    $246 Avg Bid
    12 bids

    I need you to do a project for me. I would like this project to be done in MATLAB on Windows . I want project done in matlab using CNN and auto encoder on DEAP dataset. for the classification of emotions

    $150 (Avg Bid)
    $150 Avg Bid
    1 bids

    I need you to develop some software for me. I would like this software to be developed for Windows . I want project done in matlab using CNN and auto encoder on DEAP dataset

    $209 (Avg Bid)
    $209 Avg Bid
    1 bids

    I'm now working on a self balancing robot with line following for my final project. And I use Arduino Uno , L298 N H-Bridge motor controller, two dc motors with encoder , two dc motors , MPU 6050 chips and two line follow sensors . I don't know how to merge the program. I have a problem with a program

    $227 (Avg Bid)
    $227 Avg Bid
    6 bids

    I need a professional MATLAB programmer who has strong knowledge...upper left corner of each detected face bounding box, as well as the width and height of the bounding box. The code needed to be run can be found in (). I need to run it on my personal computer, so I will grant you a remote access through TeamViewer. My computer has Windows 10 x64, and Matlab R2016a. I have successfully compiled Matcaffe with Cuda 8, and cuDNN 5.1, but not CaffeMex_v2. If you could run it on your computer and send to me some demo samples, would be very nice. This will same my time and yours. Finally, I prefer to pay a fixed price for this job because I am just interested in freelancers who certainly can accomplish the project successfully. Regards,

    $235 (Avg Bid)
    $235 Avg Bid
    15 bids

    I need a professional MATLAB programmer who has strong knowledge in computer vision and machine learning to run a code for face detection. The output should be a MATLAB code that takes an image and then retur...corner of each detected face bounding box, as well as the width and height of the bounding box. The code needed to be run can be found in (). I need to run it on my personal computer, so I will grant you a remote access through TeamViewer. My computer has Windows 10 x64, and Matlab R2016a. I have successfully compiled Matcaffe with Cuda 8, and cuDNN 5.1. Finally, I prefer to pay a fixed price for this job because I am just interested in freelancers who certainly can accomplish the project successfully. Regards,

    $236 (Avg Bid)
    $236 Avg Bid
    11 bids

    i need a small project on pycuda or c cuda i have the idea and i have actually project in python and need to covert that in pycuda and the code is small around 150-200 lines.

    $77 (Avg Bid)
    $77 Avg Bid
    5 bids

    Hi I have to do lossless compression for two separate programs using Huffman coding and goloumb rice coding with block length you decide as per input of p,so you can take p=(0,1) p=(0,2) p=(0,3) and could be block length 10^6, then you get encoder output as a binary file and put the file in decoder input you will get out put as sequence which we given in input sequence then do for same goloumb rice coding. Next compare the two methods for varying values of P we have to see how close are they to H(X). any questions feel free to ask. --

    $162 (Avg Bid)
    $162 Avg Bid
    4 bids

    I have some work, in an Excel spreadsheet. Data encoder, reports, computation, editing, copying data, analyzing some data and checking formula or result.

    $1391 (Avg Bid)
    $1391 Avg Bid
    70 bids

    I have an Arduino based project with an esp32 as the main MCU working as the hub connected to two stm32f103 Blue Pills on the stm32 Arduino core. The esp32 is connected to an ili9341 tft, an sd card where the data is saved, and its own encoder. Each Blue Pill has 2 encoder buttons, 2 PWM, and one switch. First encoder for the PWM has a frequency from 0 to 400, and the second encoder has a duty cycle from 1.1 to 99.9. The button of the encoder is to multiply the value by 10 when pressed. The switch is to control the other PWM using the same encoders. Each stm32 is connected to both an ads1118 i2c and an ads1115 adc, which will have 4 channels each. The values of the two encoders and the eight analog channels will be displayed on both the android screen a...

    $293 (Avg Bid)
    $293 Avg Bid
    8 bids

    ...support the contained G.711 audio and the result are streams without audio at the website. The audio needs to be changed from "G.711" to "AAC" or something other that are compatible to "Restreamer" to bring the sound on the website. But i tried this now since over 2 months without an solution! I tried and try it with FFMPEG on a second raspberry. I want to encode it on the second PI as live-encoder and restream the modified "new" stream so i can use it as input for the "Datarhei Restreamer"-Server. But i have severe problems with configuring the entire setup and the output. The output needs to be a "new" rtmp oder rtsp stream with the correct audio codec, the rest can be the same as original. Just the audio needs chan...

    $134 (Avg Bid)
    $134 Avg Bid
    5 bids

    Help is needed to define and implement our ionCube Encoder project

    PHP
    $154 (Avg Bid)
    $154 Avg Bid
    6 bids

    Error Correction Blocks Configuration (Viterbi+Reed Solomon) on an ARTIX7-200T FPGA supporting 200 Mbps is needed. ...rleavers-Pseudorandom number generators (PRBS). The Viterbi Decoder must be parameterizable (K=7, 1/2,3/4,7/8 puncturing etc.) and must support soft decision. The Reed Solomon En/Decoder must be set to (223,255) The Interleaver must be parameterizable A Framer/Deframer must add/ remove Headers into the bitstream and should indicate a lock. The Transmit Chain: Data Source(PRBS)-> RS Encoder->Framer->Convolutional Coder- The Receive Chain: Viterbi decoder(soft decoding)->Deframer and Lock detection->RS decoding->PRBS Lock detection and BER Measurement 200 Mbps sustained decoding speed should me maintained. Complete Simulation and HD...

    $1006 (Avg Bid)
    $1006 Avg Bid
    6 bids

    Run jupyter notebook on gpu in Cluster via ssh (linux) check cuda/cudnn is correctly installed check tensorflow -gpu is installed correctly

    $47 (Avg Bid)
    $47 Avg Bid
    7 bids

    Implement K-means parallel algorithm using MPI+OpenMP+CUDA in pure C language.

    $217 (Avg Bid)
    $217 Avg Bid
    6 bids

    i need to implement this problem : Given a set of points in 2-dimensional space. Initial position (xi, yi) and velocity (vxi, vyi) are known for each point Pi. Its position at the given time t can be calculated as follows: xi(t) = xi + t*vxi yi(t) = yi + t*vyi Implement simplified K-Means algorithm to find K clusters. Find a first occurrence during given time interval [0, T] when a system of K clusters has a Quality Measure q that is less than given value QM.

    $249 (Avg Bid)
    $249 Avg Bid
    5 bids

    Run jupyter notebook on compute nodes in Cluster via ssh (linux) Set up and configuration of the client server in ssh, running python script and training my model in GPU in the nodes in cluster using the compute nodes for computation

    $41 (Avg Bid)
    $41 Avg Bid
    2 bids

    i need to modify the Buck Converter Adjustable Step-Down Power Supply Module LM2596S as you can see it in the below link I need it connected with arduino stm32f103 blue pill, it shall have an encoder with a button to change the voltage also connected to ili9341 tft lcd to show the readings and a menu using the encoder to setup and save the settings withing the stm32f103 using stm32duino . also i need you to write arduino library to control it via rs-232, i2c and spi.

    $193 (Avg Bid)
    $193 Avg Bid
    13 bids

    I have an Arduino based project with an esp32 as the main MCU working as the hub connected to two stm32f103 Blue Pills on the stm32 Arduino core. The esp32 is connected to an ili9341 tft, an sd card where the data is saved, and its own encoder. Each Blue Pill has 2 encoder buttons, 2 PWM, and one switch. First encoder for the PWM has a frequency from 0 to 400, and the second encoder has a duty cycle from 1.1 to 99.9. The button of the encoder is to multiply the value by 10 when pressed. The switch is to control the other PWM using the same encoders. Each stm32 is connected to both an ads1118 i2c and an ads1115 adc, which will have 4 channels each. The values of the two encoders and the eight analog channels will be displayed on both the android sc...

    $257 (Avg Bid)
    $257 Avg Bid
    12 bids

    ...computers' graphic card to solve the problem faster than CPU. CUDA programming or similar languages is needed to the one who wants to do this job. The code for the problem is written already. The only challenge is to manage the resources dynamically to keep the balance of calculation between the peers in the pool. The problem is able to be done in parallel format, no worries for the problem. I'd put it in the most simple way, Imagine you have a problem to solve and it takes 10 days to be done, we need a server to give a proper amount of shares to the computers in the pool and solve it faster. If there are 10 GPUs in the pool then it should be done in 1 day. Computers can go online and offline so it needs to be monitored as well. MPI and CUDA-aware MPI is the mo...

    $2943 (Avg Bid)
    $2943 Avg Bid
    3 bids

    We need to have 3 different software developed in c or c++. It doesnt have to have a gui, can run on shell. They have to be universal as they can be compiled both on win and linux. 3 different software as; First software will mine Ethash such as ethereum, ethereum classic, ubiq, dbix, whale, pirl and so on. Second software will mine Equihash such as zec, btcz, btcp and so on. Third software will mine Cryptonight such as Electreneum, bytecoin, monero and so on. For more information please bid...

    $762 (Avg Bid)
    $762 Avg Bid
    10 bids

    Mecharduino is used to control stepper motor. 1. Modify Mecharduino to control DC motor 2 Speed and Pos control with pid 3. Encoder calibration

    $201 (Avg Bid)
    $201 Avg Bid
    7 bids

    Gantry robotic arm required for a 3-D magnetic field sensor. Reachable work space 150mm by 150mm by 150 mm. Non metallic frame, preferably a plastic, stepper motors will be used along with an optical encoder. ball screws to for movement in each each of the three axes. 3 axis Hall sensor will be used on the end effector. The robot will be used to scan a permanent magnet and take readings of the magnetic field.

    $53 (Avg Bid)
    $53 Avg Bid
    11 bids

    Hello everyone, I need a software to split a problem into some blocks and gives every computer a share to calculate and gets the result back. The software should use computers' graphic card to solve the problem faster than CPU. CUDA programming or similar languages is needed to the one who wants to do this job. The code for the problem is written already. The only challenge is to manage the resources dynamically to keep the balance of calculation between the peers in the pool. The problem is able to be done in parallel format, no worries for the problem. I'd put it in the most simple way, Imagine you have a problem to solve and it takes 10 days to be done, we need a server to give a proper amount of shares to the computers in the pool and solve it faster. If there are 10...

    $3967 (Avg Bid)
    $3967 Avg Bid
    7 bids

    Opencv or any external can only be used for the purpose of: - reading image - writing image - saving image Program result: - Original image - Manipulated image - Time in seconds for processing in serial computing - Time in seconds for processing in Parallel computing.

    $109 (Avg Bid)
    $109 Avg Bid
    3 bids

    Gantry robotic arm required for a 3-D magnetic field sensor. Reachable work space 150mm by 150mm by 150 mm. Non metallic frame, preferably a plastic, stepper motors will be used along with an optical encoder. ball screws to for movement in each each of the three axes. 3 axis Hall sensor will be used on the end effector. The robot will be used to scan a permanent magnet and take readings of the magnetic field.

    $357 (Avg Bid)
    $357 Avg Bid
    12 bids

    hello! i'm looking for someone who can assist to install and setting extream code straming encoder" , input HD url stream and creat new SD url stream on linux. the person will also assist to : -remove to remove drm on live tv url -sniff URL steaming IP on youtube

    $685 (Avg Bid)
    $685 Avg Bid
    8 bids

    To implement a serial algorithm in parallel CUDA

    $363 (Avg Bid)
    $363 Avg Bid
    4 bids

    Hello, I am working in an interesting project. If you are interested and have the experience on the following topics, I would be happy if you kindly help me. I...training images (1, or 0). In the net, I find that there are many image classification algorithm and open source. But I did not find exactly what kind of algorithm, tools I should use to classify time series image data. If you have any idea, please let me know. I will pay you for this. In addition, in the internet, I also find that LSTM, Recurrent Neural Networks, Convolution Neural Network, and Auto Encoder might be used for time series image classification. But did not find any good solution with this algorithms. Could you please let me know if you have any idea about this problem? Thank you and waiting to hear from...

    $238 (Avg Bid)
    $238 Avg Bid
    15 bids

    Video over IP The project is to transmit HEVC /H.265 compressed videos over wifi. The steps of the process are shown in attachment. In our project we require two raspberry pi modules. One raspberry Pi acts as the video transmitter and the other raspberry pi acts as the video receiver. Video Transmitter(Rasberry PI 1) 1. HEVC Encode : I will send you a build Object file of HEVC encoder. Please use that to encode YUV video files. Please do not use your own HEVC coder. Input of module 1 is YUV file and the output is “.265” file compressed video. 2. Next encapsulate the “.265” file from step 1 in to RTP packets. 3. Encapsulate RTP packets from step 2 in to UDP packets. 4. Encapsulate UDP packets in to IPV4 packets. 5. Encapsulate IPv4 packets to ethernet...

    $377 (Avg Bid)
    $377 Avg Bid
    5 bids

    .../dev/ttyS1 so that it outputs the G-code to my CNC mill. My end goal is to change my workflow to: Install dropbox on my beaglebone (ubuntu) have a basic LCD display and a rotary encoder / with pushbutton, a "send" button and a "back" button. I would like the display to show me the dropbox folder and the rotary encoder to allow me to navigate the directory structure and send to the cnc mill with the push of a button. This project boils down to: implement hardware flow control on beaglebone black using any one of the uart ports... but I think only 3 and 4 support hardware flow control. Implement a rotary encoder with a push button, one other button for "back" and one button for "send" so that I can navigate a directory str...

    $855 (Avg Bid)
    $855 Avg Bid
    4 bids

    I want a team / somebody who can develop a digital control pulse mig welding machine for me. The output current should = 400 Amps There should be CC/CV feature in that. The Wire feeder motor should be rotary encoder based. The smooth welding of Aluminum, SS & MS should be possible with that.

    $9132 (Avg Bid)
    $9132 Avg Bid
    1 bids

    Need that 3dsmax supports Praticle Flow GPU simulations. For now Particle flow support only CPU simulations. So you need to know C++ and Cuda programming. Actualy, we need that mParticles start simulation on NVIDIA CUDA(with multi GPU support). Need plugin or script for 3ds max 2017 or 2018 versions. More about 3dsmax particle flow here:

    $675 (Avg Bid)
    $675 Avg Bid
    1 bids

    CRITERIA To be respectful of your time, plea...both) DESCRIPTION We are funded blockchain startup in a hot technical space. Looking for C++ or Java. Start with small projects, work up to full time, 40 hrs week, long term. Must love C++ or Java, algorithms, heads-down coding. Comfortable with memory management, multi-threading, pointers, templates, performance-optimized code, etc... P2P communication, networking, sockets. For C++, Cuda and OpenCL a plus. Can deploy to windows or linux. Bonus: Python Bonus: TeamCity, DevOps Extreme eagerness to learn, grow, and "make things work". Must be able to deal with ambiguity and "connect the dots". Grow with the company. Must be team-player and like working with other team members; success is based on ...

    $50 / hr (Avg Bid)
    $50 / hr Avg Bid
    5 bids

    This project involves creating docker images with python environment and tensorflow compiled from sources with cuda and cuddn support. *list of pip packages to be installed *build tensorflow from sources and install *build framework utils *copy directory to image and mount it in ramdisk

    $43 / hr (Avg Bid)
    $43 / hr Avg Bid
    18 bids

    We are funded blockchain startup in a hot technical space. Looking for C++ and Java. Start with small projects, work up to full time, 40 hrs week, long term. Must love C++ or Java, algorithms, heads-down coding. Comfortable with memory management, multi-threading. For C++, Cuda and OpenCL a plus. Can deploy to windows or linux. Extreme eagerness to learn, grow, and "make things work" Grow with the company. Must be team-player, success is based on the team not the individual. Must be able to deal with ambiguity and "connect the dots".

    $28 / hr (Avg Bid)
    $28 / hr Avg Bid
    16 bids

    I have some work, in an Excel spreadsheet. Data encoder

    $28 (Avg Bid)
    $28 Avg Bid
    42 bids

    Design and develop a interface logic for reading and writing to and from eMMC device to support 300Mbps data rate to Video encoder. - timelines - 2-3 weeks.

    $515 (Avg Bid)
    $515 Avg Bid
    2 bids

    I need VHDL code for PRO-MPEG FEC Encoder and Decoder per SMPTE2022.1,2 Target FPAG is Artix-7. Target bit-rate is 1Gbps. I prefer to find a previously completed project.

    $598 (Avg Bid)
    $598 Avg Bid
    4 bids