Filter

My recent searches
Filter by:
Budget
to
to
to
Type
Skills
Languages
    Job State
    13,055 bluetooth jobs found, pricing in SGD

    BUDGET WILL BE SET AT YOUR BIDDING PRICE We require a developer to build a mobile tracking capability for the tracking of phones and car-based Bluetooth. We require the capability for this app to – • Track distance (RSSI) from the beacon • Write the data from a previous list that is timestamped as going past such as (Media Access Control address (MAC address) = Rego o...

    $388 (Avg Bid)
    $388 Avg Bid
    10 bids

    Only developer from Chandigarh, Mohali (India) needed. If some one provide solution from remote then also welcome. I have lock system based on bluetooth(BLE). I want an application that connect the device with with iphone. And then from I phone we will be able to on and off that device. That all.

    $134 (Avg Bid)
    $134 Avg Bid
    1 bids

    A simple arduino wearable, the Arduino transmit data over Bluetooth and the app visualizes the data as seen in the image. Multiple same wearables in a single app Communication between wearables and the app wearable wakes every some second, transmits goes to sleep for efficiency. *note app doesn't require all data you see on the example picture

    $773 (Avg Bid)
    $773 Avg Bid
    28 bids

    We have got a Realtek evaluation board here, and we need to get it up and running. in addition we need general programming help with this SOC. RTK8763B RTL8763BFR Core Module Low Power Bluetooth 2 4 5 Evaluation Development Board Check out this link: [login to view URL] If you dont know what the RTL8763 is, please do not waste your time on this.

    $48 / hr (Avg Bid)
    $48 / hr Avg Bid
    7 bids

    For this project, you will simply write answers to these 20 questions about computer networks: 1. Which kind of crosstalk occurs between wire pairs near the source of the signal? 2. What is the earliest twisted-pair cabling standard that meets the minimum requirements for 10GBase-T transmissions? 3. What is a twist ratio, and why is it important? 4. What characteristic of optical transmissions is...

    $62 (Avg Bid)
    $62 Avg Bid
    27 bids

    We would like a feature in our Unity Game where the player can connect to a Bluetooth Low Energy device (we use HM10 please make sure your code is compatible with HM10) and continuously read data from the device. This data is sensor data like motion sensor, so the data stream will be something like: 1 1 0 0 1 1n where '1' means a particular motion sensor is high and 0 means it is low ...

    $260 (Avg Bid)
    $260 Avg Bid
    10 bids

    Hi there. We are a start up company, have been working on a bike sharing project. It will be similar with other well known sharing apps. People will be registered on app. They will see the possible bikes on the map. They will go to the bike and put the code of the bike or scan a qr code. Then smart lock will be unlocked. Smart Locks works with bluetooth. For locks integration and communication, we...

    $3642 (Avg Bid)
    $3642 Avg Bid
    147 bids

    Edit a Bluetooth Mobile Thermal Printer For Android And IOS Mobile Inbuilt Application to Print Directly from my App

    $250 (Avg Bid)
    $250 Avg Bid
    10 bids

    Hello I am working on a concept model of an EMS suit. EMS is electrical muscular stimulation. Our competitor includes Compex, Xbody, Dipulse, etc. Research Compex Mini and Dipulse. If you want to look at examples. Go to: [login to view URL] or [login to view URL] The goal of your project is to design the electronics part: 1 Study the mechanism of EMS. Research the difference in terms of electric...

    $1671 (Avg Bid)
    NDA
    $1671 Avg Bid
    14 bids

    I need someone who can edit the exisiting cordova plugin and make it work for me. Plugin is : cordova-plugin-bluetooth-serial Plugin has Bluetooth pairing and communication functionality. But I need it to have autopairing with communication on serial device. Note that my device is not BLE. It work only on this plugin not BLE. Only place bid if you have worked on same. Or search the plugin and try...

    $218 (Avg Bid)
    $218 Avg Bid
    3 bids

    I need a logo and letterhead images for a new start-up called AudioKorp. The business will be an online retailer of wireless and Bluetooth audio products, such as speakers and headphones, but not the cheap brands/models. I do not have a website built yet so I'm open on the colors, but the website will be built using Wordpress/WooCommerce. I need the logo to exude professionalism and trigger ...

    $68 (Avg Bid)
    $68
    55 entries
    Bluetooth App 3 days left

    I need an Android app. I would like it designed and built.

    $2936 (Avg Bid)
    $2936 Avg Bid
    48 bids

    Please have a look at the job detail carefully. Looking for an experienced team for developing a Mobile App to update firmware of a device with CC2541 IC using Bluetooth OTA. Prefer freelancers with past experience of CC2541 IC and someone who has built a similar APP in the past. The APP has to download and update firmware from cloud onto device in a fairly quick manner. APP needed for both iOS &...

    $31 / hr (Avg Bid)
    $31 / hr Avg Bid
    24 bids

    I need an android app similar to GPSGate android app. The GPSGate tracker available on Google Play works fine but I need some additional fields. See attached png file. The devise type needs to be TrackerOne. You will need to setup your GPSGate server available here ([login to view URL]) and use MS SQL as the database. I can add the fields on my own server. All of the fields need to become part of ...

    $881 (Avg Bid)
    $881 Avg Bid
    32 bids

    Hi I am Prayaga Sahu. I am from Berhampur, Odisha.I have completed [login to view URL] in Computer Science and Engineering in the year of 2019 with CGPA of 7.56. I have done Project in Bluetooth Control Robot using IOT.

    $34 / hr (Avg Bid)
    $34 / hr Avg Bid
    1 bids

    Overview: A door lock that can be activated using a fringer print and bluetooth (BLE). Scope of work: ● Electronic circuit schematic ● Component Package Selection. ● Component Placement. ● PCB layout. ● Fabrication file generation Functional Requirements The functionality of this product is broken down into modules- Module1: Fingerprint sensor ● -A capacitive fingerprint reader that can recog...

    $649 (Avg Bid)
    $649 Avg Bid
    10 bids

    Selbstverständlich arbeiten wir geren auf Deutsch. Folgende Beschreibung ist auf Englisch. We are two founders in the process of refining our product specifications. We are looking for an eager visionary who can consult us on the technical / IT aspects for our product. Product type: - Consumer Electronics / Smart Home Appliance / Home Entertainment What is to be programmed: - Hardware Co...

    $726 (Avg Bid)
    $726 Avg Bid
    12 bids

    Dears Sirs / Madams Good morning: I am Jorge Rodríguez, Development Engineer at Kobrither, S.A. We are implementing a new stock management system using RFID technology. I would like to know if your could make a program compatible with the following UHF Rfid Writer / Reader of the Hopeland company. [login to view URL] Here you can download their SDK [login to view URL] Basically we ...

    $693 (Avg Bid)
    $693 Avg Bid
    23 bids

    Hello I am needing someone who fits the questions about your ability designing and making a pcb without electronic issues. I will not be able to tell you about my project until I choose a winning freelancer and have the NDA document signed. After that I will provide details and sketches of the design to make/create. These below requirements are **A MUST** for the freelance to know in order to wor...

    $385 (Avg Bid)
    $385 Avg Bid
    21 bids

    I need an app that would include all source code that would be installable on android & windows. The purpose of the app is to merely transmit or receive system audio from one device to another through bluetooth &/or wifi. The app is to be as simple as possible UI wise. The user could choose wifi or bluetooth at their will to transmit or receive audio from either the windows app or the an...

    $519 (Avg Bid)
    $519 Avg Bid
    7 bids
    Bluetooth plugin Godot 1 day left
    VERIFIED

    i need you to design a communication bluetooth plugin for godot compatible between android and iOS...

    $301 (Avg Bid)
    $301 Avg Bid
    6 bids

    To show relevant data, you will need to use the app key capabilities: GPS, bluetooth and video capture. A car-phone holer is required for video capture (and can be provided as needed) . In addition, one can use other vehicles (like bikes/motorcycles, boats, etc). Scenic or interesting views will be highly appreciated and possible rewarded separately. You will need to follow all local laws for film...

    $270 (Avg Bid)
    $270 Avg Bid
    39 bids
    Ionic 4 App 20 hours left
    VERIFIED

    Develop an Ionic 4 app for Android and IOs. Between 34 and 40 pages. Includes QR Scanning, Bluetooth device detection, Open GPS Navigation and Chat. Web Services are develop by another team.

    $987 (Avg Bid)
    $987 Avg Bid
    41 bids

    We are building an IOT hybrid mobile app that’s similar to already existing digital products on the market except our product has more comprehensive features and a modern, very UE focused UI. The product consists of an external devise that pushes data via Wi-Fi and or Bluetooth (we have already developed this we just need the app) to an iOS or android device that then translates the data req...

    $10320 (Avg Bid)
    $10320 Avg Bid
    70 bids

    hello i need someone who work with receipt printers for android bluetooth and tcp/ip the code there is but need modifications thank you

    $108 (Avg Bid)
    $108 Avg Bid
    7 bids

    For a project I'm starting of I need to build a small GPS tracker device that allow user start and stop record GPS data and send these recorded data via Bluetooth, to an mobile app I am developing.

    $305 (Avg Bid)
    $305 Avg Bid
    16 bids

    Low level assignment 1 You are required to produce a video detailing your understanding of the work we have done to date on low level interfacing with the NRF51822. Some details: The video should be between 5 and 10 minutes long. The video should be stored on YouTube as as unlisted (obscure URL) item. The video must show you demonstrating accelerometer and magnetometer data being transferred over...

    $238 (Avg Bid)
    $238 Avg Bid
    10 bids

    This unit will take readings of the car from its port located under the dash. It should be no larger than about 2x2 the dongle will be always connected and taking readings that are sent Bluetooth to owners phone if the app is activated. I need this person to be in the United States preferably in Florida. Once designed it must be program and I will supply the listing of what we are looking for...

    $657 (Avg Bid)
    $657 Avg Bid
    7 bids

    Antenna design for wearable device medical application. The antenna connect to ardoino Antenna application ( wifi 802.11b or Bluetooth or data collection)

    $684 (Avg Bid)
    $684 Avg Bid
    1 bids

    I have an idea using a Garmin watch, so I want to see how much general interest there is for Garmin development. My prototype idea has two parts: 1 - Draw an arrow (using xml, not an img) based on 2 - Bluetooth Low Energy Comma Separated value(s) Requirements: - Compass must update based on Garming internal compass - Arrow must follow/dynamically updated based on compass movement (stay at hea...

    $27 (Avg Bid)
    $27 Avg Bid
    1 bids

    I have a circuit board removed from my Bluetooth headset. Attachment is the appearance. I would like to develop an App that can connect with this circuit board and has the following main functions embed. 1. Remote control to start/stop/pause recording voice. 2. Real-time transmit the voice to the device (mobile phone or tablet). 3. Real-time transform the voice to spectrogram and show it on the sc...

    $4253 (Avg Bid)
    $4253 Avg Bid
    67 bids

    I have a circuit board removed from my Bluetooth headset. Attachment is the appearance. I would like to develop an App that can connect with this circuit board and has the following main functions embed. 1. Remote control to start/stop/pause recording voice. 2. Real-time transmit the voice to the device (mobile phone or tablet). 3. Real-time transform the voice to spectrogram and show it on the sc...

    $3858 (Avg Bid)
    $3858 Avg Bid
    12 bids

    Looking for help to build a simple Bluetooth application to communicate with Arduino and Raspberry Pi devices. Existing projects on git or in books fail to function out of the box. Ideal candidate would mentor on iOS debug techniques and root cause the existing design. Swift

    $354 (Avg Bid)
    $354 Avg Bid
    15 bids

    Develop smartwatch to Raspberry Pi connectivity using Bluetooth. Collect biometric data (heart rate, SpO2, body temperature, etc) and pass to Raspberry Pi, Pi then forwards data over VPN tunnel to remote server (HTTP REST, MQTT?) for analysis/storage.

    $29 / hr (Avg Bid)
    $29 / hr Avg Bid
    22 bids

    I'm going to get bluetooth mac address over android 8.1 in flutter. Also I have to save some data in Google Sheet. Bid the experienced freelancer Only. Please describe "Android 8.1" on the top.

    $26 / hr (Avg Bid)
    $26 / hr Avg Bid
    15 bids

    We are looking for a Unity developer who has knowledge of Bluetooth and/or local area networking to create a plugin/library that allows us to wirelessly connect phones. Our current product, Treasure Hunt, is out on the app store: [login to view URL] We are now porting the game to Android, but need a solution that allows us to connect cross platform. The deliverable: - A Unity plugin that allows...

    $27 / hr (Avg Bid)
    $27 / hr Avg Bid
    29 bids

    I need an iPhone app to be built in swift i want this app to connect to my barcode bluetooth scanner, when this physical barcode scanner scans a barcode it would detect and display text to the app. is this something you can do?

    $112 (Avg Bid)
    $112 Avg Bid
    15 bids

    I need a Linux developper to write the Application, from scratch, under Linux embedded, that will manage communication & mass storage peripherals incl. GSM Modem, SSD Drive, USB device/Host, WIFI/Bluetooth device. The Hardware is an application specific carrier board using a PHYTEC SOM based on AM572x from TI.

    $3389 (Avg Bid)
    $3389 Avg Bid
    23 bids

    I need you to develop some software/hardware to encrypt the voice transmitted from Bluetooth device to phone

    $29 (Avg Bid)
    $29 Avg Bid
    1 bids

    hello there, so i have an amazon listing, which is a pair of bluetooth earphones and i want 5-7 photos done creatively around it, e.g. someone wearing the earphone, describing its features, etc.

    $66 (Avg Bid)
    $66 Avg Bid
    30 bids

    Target device: Any android mobile or tablet Preferred SW: android studio Communication device: Bluetooth wireless Communication protocol: MODBUS RTU Master, 9600,N,1 no parity We need to make a Bluetooth wireless communication application to communicate with its wireless connected MODBUS RTU SLAVE device (an electronic instrument). Few group of values called as Recipe should be available in the ...

    $775 (Avg Bid)
    $775 Avg Bid
    3 bids

    Can you do an app with bluetooth for ios? I need connectivity to a peice of hardware. Do you know arduino please check my link for more details.i don't have design so show me some of design which is suitable for my app. only professionals to bid and don't waste my time.

    $252 (Avg Bid)
    $252 Avg Bid
    7 bids

    I need you to develop some software for me. I would like this software to be developed using Python. Canindate must poses strong Bluetooth proximity knowledge. I have a raspberry pi build already created. I need help operating it. I would need to have contact with the hired person through video chat and most preferably in person. Time frame would have to be between 5pm-10pm est

    $49 / hr (Avg Bid)
    $49 / hr Avg Bid
    24 bids

    I am looking for Android Code to connect with any bluetooth WIFI or USB thermal printer and Print Receipts of food bills. Please note code should work for other brands bluetooth or USB thermal printers.

    $23 (Avg Bid)
    $23 Avg Bid
    2 bids

    Washington DC and NYC area freelancers need only to reply, all other response will be ignored!! Looking for a Full Stack Developer with proficient Hardware and Software experience to create + add improvements to a Bluetooth Tracking Device & developing interactive mobile software application that remains connected to it's retrospective Website to keep all information. Software Applicati...

    $5338 (Avg Bid)
    $5338 Avg Bid
    53 bids

    We are building an IOT hybrid mobile app that’s similar to already existing digital products on the market except our product has more comprehensive features and a modern, very UE focused UI. The product consists of an external devise that pushes data via Wi-Fi and or Bluetooth (we have already developed this we just need the app) to an iOS or android device that then translates the data req...

    $29 / hr (Avg Bid)
    $29 / hr Avg Bid
    29 bids

    I need android app that fully control bluetooth-enabled LED Lighting. For more details, please contact for me.

    $532 (Avg Bid)
    $532 Avg Bid
    31 bids

    I have this Google ADT-1 android TV and it need and an update but i don't know how to create a android Rom... not sure if should go with a fully loaded android system or the android tv system... Serious freelancers have worked with and an Google ADT-1 before or has one... Mention that in your response. I will be willing to ship the device to you if you're in the USA! You can use this ...

    $177 (Avg Bid)
    $177 Avg Bid
    7 bids

    We have a Nordic Thingy:52 sensor and a Raspberry Pi which are connected through Bluetooth. The Raspberry Pi is also connected to the Internet via WiFi. We want to get all sensor data from Thingy to the Losant platform ([login to view URL]) in order to run various workflows. We have tried to send sensor data from the Nordic Thingy:52 (nRF6936) to the Losant platform through the MQTT protocol but ...

    $683 (Avg Bid)
    $683 Avg Bid
    23 bids

    I am working on a time-series machine learning project that requires high quality motion data. My software is currently working with a Texas Instruments CC2650 SensorTag, but I want a smaller design that is in-house.

    $322 (Avg Bid)
    $322 Avg Bid
    7 bids

    Top bluetooth Community Articles